Go to main content

man pages section 8: System Administration Commands

Exit Print View

Updated: Thursday, June 13, 2019
 
 

ibprintca (8)

Name

ibprintca - print either the ca specified or the list of cas from the ibnetdiscover output

Synopsis

ibprintca.pl [-R -l -C <ca_name> -P <ca_port>] [<ca_guid|node_name>]

Description

IBPRINTCA(8)                  OpenIB Diagnostics                  IBPRINTCA(8)



NAME
       ibprintca.pl  -  print  either the ca specified or the list of cas from
       the ibnetdiscover output


SYNOPSIS
       ibprintca.pl [-R -l -C <ca_name> -P <ca_port>] [<ca_guid|node_name>]


DESCRIPTION
       Faster than greping/viewing with an editor the output of ibnetdiscover,
       ibprintca.pl will parse out and print either the CA information for the
       specified CA or a list of all the CAs in the subnet.

       Finally, ibprintca.pl will also reuse the cached  ibnetdiscover  output
       from some of the other diag tools which makes it a bit faster than run-
       ning ibnetdiscover from scratch.



OPTIONS
       -l     List the CAs (simply a wrapper for ibhosts).

       -R     Recalculate the ibnetdiscover information, ie  do  not  use  the
              cached information.  This option is slower but should be used if
              the diag tools have not been used for some time or if there  are
              other reasons to believe that the fabric has changed.

       -C <ca_name>    use the specified ca_name for the search.

       -P <ca_port>    use the specified ca_port for the search.


AUTHORS
       Ira Weiny
              <weiny2@llnl.gov>

       Hal Rosenstock
              <halr@voltaire.com>



ATTRIBUTES
       See attributes(7) for descriptions of the following attributes:


       +---------------+-----------------------+
       |ATTRIBUTE TYPE |   ATTRIBUTE VALUE     |
       +---------------+-----------------------+
       |Availability   | network/open-fabrics  |
       +---------------+-----------------------+
       |Stability      | Pass-through volatile |
       +---------------+-----------------------+
NOTES
       This     software     was    built    from    source    available    at
       https://github.com/oracle/solaris-userland.   The  original   community
       source   was   downloaded   from    ['https://www.openfabrics.org/down-
       loads/ibutils/ibutils-1.5.7-0.2.gbd7e502.tar.gz', 'https://www.openfab-
       rics.org/downloads/libibverbs/libibverbs-1.1.8.tar.gz',
       'https://www.openfabrics.org/downloads/libmlx4/libmlx4-1.0.6.tar.gz',
       'https://www.openfabrics.org/downloads/libsdp/lib-
       sdp-1.1.108-0.15.gd7fdb72.tar.gz',   'https://www.openfabrics.org/down-
       loads/management/infiniband-diags-1.6.5.tar.gz',  'https://www.openfab-
       rics.org/downloads/management/libibmad-1.3.12.tar.gz',
       'https://www.openfabrics.org/downloads/management/libibu-
       mad-1.3.10.2.tar.gz',    'https://www.openfabrics.org/downloads/manage-
       ment/opensm-3.3.19.tar.gz',          'https://www.openfabrics.org/down-
       loads/perftest/perftest-1.3.0-0.42.gf350d3d.tar.gz', 'https://www.open-
       fabrics.org/downloads/qperf/qperf-0.4.9.tar.gz',  'https://www.openfab-
       rics.org/downloads/rdmacm/librdmacm-1.0.21.tar.gz',  'https://www.open-
       fabrics.org/downloads/rds-tools/rds-tools-2.0.4.tar.gz']

       Further information about this software can be found on the open source
       community website at http://www.openfabrics.org/.



OpenIB                           May 31, 2007                     IBPRINTCA(8)