Go to main content

man pages section 8: System Administration Commands

Exit Print View

Updated: Thursday, June 13, 2019
 
 

ibsysstat (8)

Name

ibsysstat - Man page for 'ibsysstat' in section 8

Synopsis

Please see following description for synopsis

Description

IBSYSSTAT(8)                  Open IB Diagnostics                 IBSYSSTAT(8)



NAME
       IBSYSSTAT -

SYSTEM STATUS ON AN INFINIBAND ADDRESS
   SYNOPSIS
       ibsysstat [options] <dest lid | guid> [<op>]

   DESCRIPTION
       ibsysstat  uses  vendor  mads to validate connectivity between IB nodes
       and obtain other information about the IB node.  ibsysstat  is  run  as
       client/server. Default is to run as client.

   OPTIONS
       Current supported operations:

          ping \- verify connectivity to server (default)
          host \- obtain host information from server
          cpu  \- obtain cpu information from server

       -o, --oui
              use specified OUI number to multiplex vendor mads

       -S, --Server
              start in server mode (do not return)

   Addressing Flags
       -G, --Guid     The address specified is a Port GUID

       -L, --Lid   The address specified is a LID

       -s, --sm_port <smlid>     use 'smlid' as the target lid for SA queries.

   Port Selection flags
       -C, --Ca <ca_name>    use the specified ca_name.

       -P, --Port <ca_port>    use the specified ca_port.

   Local port Selection
       Multiple  port/Multiple CA support: when no IB device or port is speci-
       fied (see the "local umad parameters"  below),  the  libibumad  library
       selects the port to use by the following criteria:

          1. the first port that is ACTIVE.

          2. if not found, the first port that is UP (physical link up).

          If  a  port  and/or  CA  name  is  specified,  the libibumad library
          attempts to fulfill the user request, and will fail  if  it  is  not
          possible.

          For example:

              ibaddr                 # use the first port (criteria #1 above)
              ibaddr -C mthca1       # pick the best port from "mthca1" only.
              ibaddr -P 2            # use the second (active/up) port from the first available IB device.
              ibaddr -C mthca0 -P 2  # use the specified port only.

   Debugging flags
       -d     raise  the  IB debugging level.  May be used several times (-ddd
              or -d -d -d).

       -e     show send and receive errors (timeouts and others)

       -h, --help      show the usage message

       -v, --verbose
              increase the application verbosity level.  May be  used  several
              times (-vv or -v -v -v)

       -V, --version     show the version info.

   Configuration flags
       -t,  --timeout  <timeout_ms>  override  the  default  timeout  for  the
       solicited mads.

       --config, -z  <config_file> Specify alternate config file.
          Default: /etc/infiniband/infiniband-diags/ibdiag.conf

   FILES
   CONFIG FILE
       /etc/infiniband/infiniband-diags/ibdiag.conf

       A global config file is provided to set some of the common options  for
       all tools.  See supplied config file for details.

   AUTHOR
       Hal Rosenstock
              < halr@voltaire.com >



ATTRIBUTES
       See attributes(7) for descriptions of the following attributes:


       +---------------+-----------------------+
       |ATTRIBUTE TYPE |   ATTRIBUTE VALUE     |
       +---------------+-----------------------+
       |Availability   | network/open-fabrics  |
       +---------------+-----------------------+
       |Stability      | Pass-through volatile |
       +---------------+-----------------------+
NOTES
       This     software     was    built    from    source    available    at
       https://github.com/oracle/solaris-userland.   The  original   community
       source   was   downloaded   from    ['https://www.openfabrics.org/down-
       loads/ibutils/ibutils-1.5.7-0.2.gbd7e502.tar.gz', 'https://www.openfab-
       rics.org/downloads/libibverbs/libibverbs-1.1.8.tar.gz',
       'https://www.openfabrics.org/downloads/libmlx4/libmlx4-1.0.6.tar.gz',
       'https://www.openfabrics.org/downloads/libsdp/lib-
       sdp-1.1.108-0.15.gd7fdb72.tar.gz',   'https://www.openfabrics.org/down-
       loads/management/infiniband-diags-1.6.5.tar.gz',  'https://www.openfab-
       rics.org/downloads/management/libibmad-1.3.12.tar.gz',
       'https://www.openfabrics.org/downloads/management/libibu-
       mad-1.3.10.2.tar.gz',    'https://www.openfabrics.org/downloads/manage-
       ment/opensm-3.3.19.tar.gz',          'https://www.openfabrics.org/down-
       loads/perftest/perftest-1.3.0-0.42.gf350d3d.tar.gz', 'https://www.open-
       fabrics.org/downloads/qperf/qperf-0.4.9.tar.gz',  'https://www.openfab-
       rics.org/downloads/rdmacm/librdmacm-1.0.21.tar.gz',  'https://www.open-
       fabrics.org/downloads/rds-tools/rds-tools-2.0.4.tar.gz']

       Further information about this software can be found on the open source
       community website at http://www.openfabrics.org/.



                                                                  IBSYSSTAT(8)