Go to main content

man pages section 8: System Administration Commands

Exit Print View

Updated: Thursday, June 13, 2019
 
 

ibrouters (8)

Name

ibrouters - show InfiniBand router nodes in topology

Synopsis

ibrouters [options] [<topology-file>]

Description

IBROUTERS(8)                  OpenIB Diagnostics                  IBROUTERS(8)



NAME
       IBROUTERS - show InfiniBand router nodes in topology

SYNOPSIS
       ibrouters [options] [<topology-file>]

DESCRIPTION
       ibrouters is a script which either walks the IB subnet topology or uses
       an already saved topology file and extracts the router nodes.

OPTIONS
       -C, --Ca <ca_name>    use the specified ca_name.

       -P, --Port <ca_port>    use the specified ca_port.

       -t,  --timeout  <timeout_ms>  override  the  default  timeout  for  the
       solicited mads.

       -h, --help      show the usage message

       --config, -z  <config_file> Specify alternate config file.
          Default: /etc/infiniband/infiniband-diags/ibdiag.conf

   Local port Selection
       Multiple  port/Multiple CA support: when no IB device or port is speci-
       fied (see the "local umad parameters"  below),  the  libibumad  library
       selects the port to use by the following criteria:

          1. the first port that is ACTIVE.

          2. if not found, the first port that is UP (physical link up).

          If  a  port  and/or  CA  name  is  specified,  the libibumad library
          attempts to fulfill the user request, and will fail  if  it  is  not
          possible.

          For example:

              ibaddr                 # use the first port (criteria #1 above)
              ibaddr -C mthca1       # pick the best port from "mthca1" only.
              ibaddr -P 2            # use the second (active/up) port from the first available IB device.
              ibaddr -C mthca0 -P 2  # use the specified port only.

FILES
   CONFIG FILE
       /etc/infiniband/infiniband-diags/ibdiag.conf

       A  global config file is provided to set some of the common options for
       all tools.  See supplied config file for details.

   NODE NAME MAP FILE FORMAT
       The node name map is used to specify user friendly names for  nodes  in
       the output.  GUIDs are used to perform the lookup.

       This  functionality  is  provided  by  the  opensm-libs  package.   See
       opensm(8) for the file location for your installation.

       Generically:

          # comment
          <guid> "<name>"

       Example:

          # IB1
          # Line cards
          0x0008f104003f125c "IB1 (Rack 11 slot 1   ) ISR9288/ISR9096 Voltaire sLB-24D"
          0x0008f104003f125d "IB1 (Rack 11 slot 1   ) ISR9288/ISR9096 Voltaire sLB-24D"
          0x0008f104003f10d2 "IB1 (Rack 11 slot 2   ) ISR9288/ISR9096 Voltaire sLB-24D"
          0x0008f104003f10d3 "IB1 (Rack 11 slot 2   ) ISR9288/ISR9096 Voltaire sLB-24D"
          0x0008f104003f10bf "IB1 (Rack 11 slot 12  ) ISR9288/ISR9096 Voltaire sLB-24D"

          # Spines
          0x0008f10400400e2d "IB1 (Rack 11 spine 1   ) ISR9288 Voltaire sFB-12D"
          0x0008f10400400e2e "IB1 (Rack 11 spine 1   ) ISR9288 Voltaire sFB-12D"
          0x0008f10400400e2f "IB1 (Rack 11 spine 1   ) ISR9288 Voltaire sFB-12D"
          0x0008f10400400e31 "IB1 (Rack 11 spine 2   ) ISR9288 Voltaire sFB-12D"
          0x0008f10400400e32 "IB1 (Rack 11 spine 2   ) ISR9288 Voltaire sFB-12D"

          # GUID   Node Name
          0x0008f10400411a08 "SW1  (Rack  3) ISR9024 Voltaire 9024D"
          0x0008f10400411a28 "SW2  (Rack  3) ISR9024 Voltaire 9024D"
          0x0008f10400411a34 "SW3  (Rack  3) ISR9024 Voltaire 9024D"
          0x0008f104004119d0 "SW4  (Rack  3) ISR9024 Voltaire 9024D"


ATTRIBUTES
       See attributes(7) for descriptions of the following attributes:


       +---------------+-----------------------+
       |ATTRIBUTE TYPE |   ATTRIBUTE VALUE     |
       +---------------+-----------------------+
       |Availability   | network/open-fabrics  |
       +---------------+-----------------------+
       |Stability      | Pass-through volatile |
       +---------------+-----------------------+
SEE ALSO
       ibnetdiscover(8)

DEPENDENCIES
       ibnetdiscover, ibnetdiscover format

AUTHOR
       Hal Rosenstock
              < halr@voltaire.com >



NOTES
       This    software    was    built    from    source     available     at
       https://github.com/oracle/solaris-userland.    The  original  community
       source   was   downloaded   from    ['https://www.openfabrics.org/down-
       loads/ibutils/ibutils-1.5.7-0.2.gbd7e502.tar.gz', 'https://www.openfab-
       rics.org/downloads/libibverbs/libibverbs-1.1.8.tar.gz',
       'https://www.openfabrics.org/downloads/libmlx4/libmlx4-1.0.6.tar.gz',
       'https://www.openfabrics.org/downloads/libsdp/lib-
       sdp-1.1.108-0.15.gd7fdb72.tar.gz',   'https://www.openfabrics.org/down-
       loads/management/infiniband-diags-1.6.5.tar.gz',  'https://www.openfab-
       rics.org/downloads/management/libibmad-1.3.12.tar.gz',
       'https://www.openfabrics.org/downloads/management/libibu-
       mad-1.3.10.2.tar.gz',    'https://www.openfabrics.org/downloads/manage-
       ment/opensm-3.3.19.tar.gz',          'https://www.openfabrics.org/down-
       loads/perftest/perftest-1.3.0-0.42.gf350d3d.tar.gz', 'https://www.open-
       fabrics.org/downloads/qperf/qperf-0.4.9.tar.gz',  'https://www.openfab-
       rics.org/downloads/rdmacm/librdmacm-1.0.21.tar.gz',  'https://www.open-
       fabrics.org/downloads/rds-tools/rds-tools-2.0.4.tar.gz']

       Further information about this software can be found on the open source
       community website at http://www.openfabrics.org/.



                                                                  IBROUTERS(8)