Go to main content

man pages section 8: System Administration Commands

Exit Print View

Updated: Thursday, June 13, 2019
 
 

ibprintrt (8)

Name

ibprintrt - print either only the router specified or a list of routers from the ibnetdiscover output

Synopsis

ibprintrt.pl [-R -l -C <ca_name> -P <ca_port>] [<rt_guid|node_name>]

Description

IBPRINTRT(8)                  OpenIB Diagnostics                  IBPRINTRT(8)



NAME
       ibprintrt.pl  -  print  either  only  the router specified or a list of
       routers from the ibnetdiscover output


SYNOPSIS
       ibprintrt.pl [-R -l -C <ca_name> -P <ca_port>] [<rt_guid|node_name>]


DESCRIPTION
       Faster than greping/viewing with an editor the output of ibnetdiscover,
       ibprintrt.pl will parse out and print either the router information for
       the specified IB router or a list of all IB routers in the subnet.

       Finally, ibprintrt.pl will also reuse the cached  ibnetdiscover  output
       from some of the other diag tools which makes it a bit faster than run-
       ning ibnetdiscover from scratch.



OPTIONS
       -l     List the Rts (simply a wrapper for ibrouters).

       -R     Recalculate the ibnetdiscover information, ie  do  not  use  the
              cached information.  This option is slower but should be used if
              the diag tools have not been used for some time or if there  are
              other reasons to believe that the fabric has changed.

       -C <ca_name>    use the specified ca_name for the search.

       -P <ca_port>    use the specified ca_port for the search.



AUTHOR
       Hal Rosenstock
              <halr@voltaire.com>



ATTRIBUTES
       See attributes(7) for descriptions of the following attributes:


       +---------------+-----------------------+
       |ATTRIBUTE TYPE |   ATTRIBUTE VALUE     |
       +---------------+-----------------------+
       |Availability   | network/open-fabrics  |
       +---------------+-----------------------+
       |Stability      | Pass-through volatile |
       +---------------+-----------------------+
NOTES
       This     software     was    built    from    source    available    at
       https://github.com/oracle/solaris-userland.   The  original   community
       source   was   downloaded   from    ['https://www.openfabrics.org/down-
       loads/ibutils/ibutils-1.5.7-0.2.gbd7e502.tar.gz', 'https://www.openfab-
       rics.org/downloads/libibverbs/libibverbs-1.1.8.tar.gz',
       'https://www.openfabrics.org/downloads/libmlx4/libmlx4-1.0.6.tar.gz',
       'https://www.openfabrics.org/downloads/libsdp/lib-
       sdp-1.1.108-0.15.gd7fdb72.tar.gz',   'https://www.openfabrics.org/down-
       loads/management/infiniband-diags-1.6.5.tar.gz',  'https://www.openfab-
       rics.org/downloads/management/libibmad-1.3.12.tar.gz',
       'https://www.openfabrics.org/downloads/management/libibu-
       mad-1.3.10.2.tar.gz',    'https://www.openfabrics.org/downloads/manage-
       ment/opensm-3.3.19.tar.gz',          'https://www.openfabrics.org/down-
       loads/perftest/perftest-1.3.0-0.42.gf350d3d.tar.gz', 'https://www.open-
       fabrics.org/downloads/qperf/qperf-0.4.9.tar.gz',  'https://www.openfab-
       rics.org/downloads/rdmacm/librdmacm-1.0.21.tar.gz',  'https://www.open-
       fabrics.org/downloads/rds-tools/rds-tools-2.0.4.tar.gz']

       Further information about this software can be found on the open source
       community website at http://www.openfabrics.org/.



OpenIB                           May 31, 2007                     IBPRINTRT(8)