named-compilezone - zone file validity checking or converting tool
named-compilezone [-d] [-h] [-j] [-q] [-v] [-c class] [-f format] [-F
format] [-J filename] [-i mode] [-k mode] [-m mode] [-M mode] [-n mode]
[-l ttl] [-L serial] [-r mode] [-s style] [-S mode] [-t directory] [-T
mode] [-w directory] [-D] [-W mode] {-o filename} {zonename} {filename}
NAMED-COMPILEZONE(8) BIND 9 NAMED-COMPILEZONE(8)
NAME
named-compilezone - zone file validity checking or converting tool
SYNOPSIS
named-compilezone [-d] [-h] [-j] [-q] [-v] [-c class] [-f format] [-F
format] [-J filename] [-i mode] [-k mode] [-m mode] [-M mode] [-n mode]
[-l ttl] [-L serial] [-r mode] [-s style] [-S mode] [-t directory] [-T
mode] [-w directory] [-D] [-W mode] {-o filename} {zonename} {filename}
DESCRIPTION
named-compilezone checks the syntax and integrity of a zone file, and
dumps the zone contents to a specified file in a specified format. It
applies strict check levels by default, since the dump output is used
as an actual zone file loaded by named. When manually specified other-
wise, the check levels must at least be as strict as those specified in
the named configuration file.
OPTIONS
-d This option enables debugging.
-h This option prints the usage summary and exits.
-q This option sets quiet mode, which only sets an exit code to
indicate successful or failed completion.
-v This option prints the version of the named-checkzone program
and exits.
-j When loading a zone file, this option tells named to read the
journal if it exists. The journal file name is assumed to be the
zone file name with the string .jnl appended.
-J filename
When loading the zone file, this option tells named to read the
journal from the given file, if it exists. This implies -j.
-c class
This option specifies the class of the zone. If not specified,
IN is assumed.
-i mode
This option performs post-load zone integrity checks. Possible
modes are full (the default), full-sibling, local, local-sib-
ling, and none.
Mode full checks that MX records refer to A or AAAA records
(both in-zone and out-of-zone hostnames). Mode local only checks
MX records which refer to in-zone hostnames.
Mode full checks that SRV records refer to A or AAAA records
(both in-zone and out-of-zone hostnames). Mode local only checks
SRV records which refer to in-zone hostnames.
Mode full checks that delegation NS records refer to A or AAAA
records (both in-zone and out-of-zone hostnames). It also checks
that glue address records in the zone match those advertised by
the child. Mode local only checks NS records which refer to
in-zone hostnames or verifies that some required glue exists,
i.e., when the name server is in a child zone.
Modes full-sibling and local-sibling disable sibling glue
checks, but are otherwise the same as full and local, respec-
tively.
Mode none disables the checks.
-f format
This option specifies the format of the zone file. Possible for-
mats are text (the default), raw, and map.
-F format
This option specifies the format of the output file specified.
For named-checkzone, this does not have any effect unless it
dumps the zone contents.
Possible formats are text (the default), which is the standard
textual representation of the zone, and map, raw, and raw=N,
which store the zone in a binary format for rapid loading by
named. raw=N specifies the format version of the raw zone file:
if N is 0, the raw file can be read by any version of named; if
N is 1, the file can only be read by release 9.9.0 or higher.
The default is 1.
-k mode
This option performs check-names checks with the specified fail-
ure mode. Possible modes are fail (the default), warn, and
ignore.
-l ttl This option sets a maximum permissible TTL for the input file.
Any record with a TTL higher than this value causes the zone to
be rejected. This is similar to using the max-zone-ttl option in
named.conf.
-L serial
When compiling a zone to raw or map format, this option sets the
"source serial" value in the header to the specified serial num-
ber. This is expected to be used primarily for testing purposes.
-m mode
This option specifies whether MX records should be checked to
see if they are addresses. Possible modes are fail, warn (the
default), and ignore.
-M mode
This option checks whether a MX record refers to a CNAME. Possi-
ble modes are fail, warn (the default), and ignore.
-n mode
This option specifies whether NS records should be checked to
see if they are addresses. Possible modes are fail (the
default), warn, and ignore.
-o filename
This option writes the zone output to filename. If filename is
-, then the zone output is written to standard output. This is
mandatory for named-compilezone.
-r mode
This option checks for records that are treated as different by
DNSSEC but are semantically equal in plain DNS. Possible modes
are fail, warn (the default), and ignore.
-s style
This option specifies the style of the dumped zone file. Possi-
ble styles are full (the default) and relative. The full format
is most suitable for processing automatically by a separate
script. The relative format is more human-readable and is thus
suitable for editing by hand.
-S mode
This option checks whether an SRV record refers to a CNAME. Pos-
sible modes are fail, warn (the default), and ignore.
-t directory
This option tells named to chroot to directory, so that include
directives in the configuration file are processed as if run by
a similarly chrooted named.
-T mode
This option checks whether Sender Policy Framework (SPF) records
exist and issues a warning if an SPF-formatted TXT record is not
also present. Possible modes are warn (the default) and ignore.
-w directory
This option instructs named to chdir to directory, so that rela-
tive filenames in master file $INCLUDE directives work. This is
similar to the directory clause in named.conf.
-D This option dumps the zone file in canonical format. This is
always enabled for named-compilezone.
-W mode
This option specifies whether to check for non-terminal wild-
cards. Non-terminal wildcards are almost always the result of a
failure to understand the wildcard matching algorithm (RFC
4592). Possible modes are warn (the default) and ignore.
zonename
This indicates the domain name of the zone being checked.
filename
This is the name of the zone file.
RETURN VALUES
named-compilezone returns an exit status of 1 if errors were detected
and 0 otherwise.
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
+---------------+--------------------------+
|ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+---------------+--------------------------+
|Availability | network/dns/bind |
+---------------+--------------------------+
|Stability | Pass-through uncommitted |
+---------------+--------------------------+
SEE ALSO
named(8), named-checkconf(8), named-checkzone(8), RFC 1035, BIND 9
Administrator Reference Manual.
AUTHOR
Internet Systems Consortium
COPYRIGHT
2022, Internet Systems Consortium
NOTES
Source code for open source software components in Oracle Solaris can
be found at https://www.oracle.com/downloads/opensource/solaris-source-
code-downloads.html.
This software was built from source available at
https://github.com/oracle/solaris-userland. The original community
source was downloaded from
http://ftp.isc.org/isc/bind9/9.16.29/bind-9.16.29.tar.xz.
Further information about this software can be found on the open source
community website at http://www.isc.org/software/bind/.
9.16.29 2022-05-10 NAMED-COMPILEZONE(8)