Go to main content

man pages section 8: System Administration Commands

Exit Print View

Updated: Thursday, June 13, 2019
 
 

sminfo (8)

Name

sminfo - Man page for 'sminfo' in section 8

Synopsis

Please see following description for synopsis

Description

SMINFO(8)                     Open IB Diagnostics                    SMINFO(8)



NAME
       SMINFO -

QUERY INFINIBAND SMINFO ATTRIBUTE
   SYNOPSIS
       sminfo [options] sm_lid | sm_dr_path [modifier]

   DESCRIPTION
       Optionally  set and display the output of a sminfo query in human read-
       able format. The target SM is the one listed in the local port info, or
       the  SM  specified  by  the  optional SM lid or by the SM direct routed
       path.

       Note: using sminfo for any purposes other then simple query may be very
       dangerous, and may result in a malfunction of the target SM.

   OPTIONS
       -s, --state <state> set SM state
              0 not active

              1 discovering

              2 standby

              3 master

       -p, --priority <priority> set priority (0-15)

       -a, --activity <val> set activity count

   Addressing Flags
       -D, --Direct     The address specified is a directed route

          Examples:
             [options] -D [options] "0"          # self port
             [options] -D [options] "0,1,2,1,4"  # out via port 1, then 2, ...

             (Note the second number in the path specified must match the port being
             used.  This can be specified using the port selection flag '-P' or the
             port found through the automatic selection process.)

       -G, --Guid     The address specified is a Port GUID

       -L, --Lid   The address specified is a LID

   Port Selection flags
       -C, --Ca <ca_name>    use the specified ca_name.

       -P, --Port <ca_port>    use the specified ca_port.

   Local port Selection
       Multiple  port/Multiple CA support: when no IB device or port is speci-
       fied (see the "local umad parameters"  below),  the  libibumad  library
       selects the port to use by the following criteria:

          1. the first port that is ACTIVE.

          2. if not found, the first port that is UP (physical link up).

          If  a  port  and/or  CA  name  is  specified,  the libibumad library
          attempts to fulfill the user request, and will fail  if  it  is  not
          possible.

          For example:

              ibaddr                 # use the first port (criteria #1 above)
              ibaddr -C mthca1       # pick the best port from "mthca1" only.
              ibaddr -P 2            # use the second (active/up) port from the first available IB device.
              ibaddr -C mthca0 -P 2  # use the specified port only.

   Debugging flags
       -d     raise  the  IB debugging level.  May be used several times (-ddd
              or -d -d -d).

       -e     show send and receive errors (timeouts and others)

       -h, --help      show the usage message

       -v, --verbose
              increase the application verbosity level.  May be  used  several
              times (-vv or -v -v -v)

       -V, --version     show the version info.

   Configuration flags
       -t,  --timeout  <timeout_ms>  override  the  default  timeout  for  the
       solicited mads.

       -y, --m_key <key>
              use the specified M_key for requests. If non-numeric value (like
              'x') is specified then a value will be prompted for.

       --config, -z  <config_file> Specify alternate config file.
          Default: /etc/infiniband/infiniband-diags/ibdiag.conf

   FILES
   CONFIG FILE
       /etc/infiniband/infiniband-diags/ibdiag.conf

       A  global config file is provided to set some of the common options for
       all tools.  See supplied config file for details.

   EXAMPLES
       ::     sminfo                   #  local  port's   sminfo   sminfo   32
              # show sminfo of lid 32 sminfo  -G 0x8f1040023  # same but using
              guid address

   SEE ALSO
       smpdump (8)

   AUTHOR
       Hal Rosenstock
              < halr@voltaire.com >



ATTRIBUTES
       See attributes(7) for descriptions of the following attributes:


       +---------------+-----------------------+
       |ATTRIBUTE TYPE |   ATTRIBUTE VALUE     |
       +---------------+-----------------------+
       |Availability   | network/open-fabrics  |
       +---------------+-----------------------+
       |Stability      | Pass-through volatile |
       +---------------+-----------------------+
NOTES
       This    software    was    built    from    source     available     at
       https://github.com/oracle/solaris-userland.    The  original  community
       source   was   downloaded   from    ['https://www.openfabrics.org/down-
       loads/ibutils/ibutils-1.5.7-0.2.gbd7e502.tar.gz', 'https://www.openfab-
       rics.org/downloads/libibverbs/libibverbs-1.1.8.tar.gz',
       'https://www.openfabrics.org/downloads/libmlx4/libmlx4-1.0.6.tar.gz',
       'https://www.openfabrics.org/downloads/libsdp/lib-
       sdp-1.1.108-0.15.gd7fdb72.tar.gz',   'https://www.openfabrics.org/down-
       loads/management/infiniband-diags-1.6.5.tar.gz',  'https://www.openfab-
       rics.org/downloads/management/libibmad-1.3.12.tar.gz',
       'https://www.openfabrics.org/downloads/management/libibu-
       mad-1.3.10.2.tar.gz',    'https://www.openfabrics.org/downloads/manage-
       ment/opensm-3.3.19.tar.gz',          'https://www.openfabrics.org/down-
       loads/perftest/perftest-1.3.0-0.42.gf350d3d.tar.gz', 'https://www.open-
       fabrics.org/downloads/qperf/qperf-0.4.9.tar.gz',  'https://www.openfab-
       rics.org/downloads/rdmacm/librdmacm-1.0.21.tar.gz',  'https://www.open-
       fabrics.org/downloads/rds-tools/rds-tools-2.0.4.tar.gz']

       Further information about this software can be found on the open source
       community website at http://www.openfabrics.org/.



                                                                     SMINFO(8)