Go to main content

man pages section 8: System Administration Commands

Exit Print View

Updated: Thursday, June 13, 2019
 
 

metaonline(8)

Name

metaoffline, metaonline - place submirrors offline and online

Synopsis

/usr/sbin/metaoffline -h
/usr/sbin/metaoffline [-s setname] [-f] mirror submirror
/usr/sbin/metaonline -h
/usr/sbin/metaonline [-s setname] mirror submirror

Description

The metaoffline command prevents Solaris Volume Manager from reading and writing to the submirror that has been taken offline. While the submirror is offline, all writes to the mirror will be kept track of (by region) and will be written when the submirror is brought back online. The metaoffline command can also be used to perform online backups: one submirror is taken offline and backed up while the mirror remains accessible. (However, if this is a two-way mirror, data redundancy is lost while one submirror is offline.) The metaoffline command differs from the metadetach command because it does not sever the logical association between the submirror and the mirror. To completely remove a submirror from a mirror, use the metadetach command.

A submirror that has been taken offline will only remain offline until the metaonline command is invoked or the system is rebooted.

When the metaonline command is used, reading from and writing to the submirror resumes. A resync is automatically invoked to resync the regions written while the submirror was offline. Writes are directed to the submirror during resync. Reads, however, will come from a different submirror. Once the resync operation completes, reads and writes are performed on that submirror. The metaonline command is only effective on a submirror of a mirror that has been taken offline.

The metaoffline and metaonline commands can not be used on RAID 1 volumes in application-based recovery (ABR) mode.

A submirror that has been taken offline with the metaoffline command can only be mounted as read-only.

Options

Root privileges are required for all of the following options except –h.

–f

Forces offlining of submirrors that have slices requiring maintenance.

–h

Displays usage message.

–s setname

Specifies the name of the diskset on which metaoffline and metaonline will work. Using the –s option will cause the command to perform its administrative function within the specified diskset. Without this option, the command will perform its function on local metadevices.

mirror

Specifies the metadevice name of the mirror from which the submirror will be either taken offline or put online.

submirror

Specifies the metadevice name of the submirror to be either taken offline or put online.

Examples

Example 1 Taking a Submirror Offline

This example takes one submirror, mymirror_sub1, offline from mirror mymirror.

# metaoffline mymirror mymirror_sub1

Exit Status

The following exit values are returned:

0

Successful completion.

>0

An error occurred.

Attributes

See attributes(7) for descriptions of the following attributes:

ATTRIBUTE TYPE
ATTRIBUTE VALUE
Availability
storage/svm
Interface Stability
Committed

See Also

md(4D), md.cf(5), md.tab(5), md.tab(5), mddb.cf(5), attributes(7), mdmonitord(8), metaclear(8), metadb(8), metadetach(8), metahs(8), metainit(8), metaparam(8), metarecover(8), metarename(8), metareplace(8), metaset(8), metassist(8), metastat(8), metasync(8), metattach(8)

Notes

The metaonline and metaoffline commands are not applicable to mirrors in application-based recovery (ABR) mode.