Returning a Server to Operation

Language:

These topics explain how to return a Netra SPARC S7-2 server from Oracle to operation after you perform service procedures.

Step	Task	Link
1.	Install the air duct if you serviced these components: PSU duct DIMMs LED board	Install the Air Duct
2.	Install the PSU duct if you serviced these components: Air duct USB board Motherboard PDB PDB signal cable	Install the PSU Duct
3.	Secure the drive cage if you serviced the components in Step 1, Step 2, or the drive backplane.	Secure the Drive Cage
4.	Install the fan tray if you serviced the components in Step 1, Step 2, Step 3, or these components: Drive signal cable Drive power cable	Install the Fan Tray
5.	Install the top cover if you serviced the components in Step 1, Step 2, Step 3, Step 4 or these components: Fan modules PCIe cards Battery	Install the Top Cover
6.	Install the server into the rack.	See Netra SPARC S7-2 Server Installation Guide to install the server into the rack.
7.	Connect power cords to the server.	Connect AC Power Cords
8.	Power on the server by one of two methods.	Power On the Server (Oracle ILOM) Power On the Server (Power Button)
9.	Verify the installation of the component, if you serviced the components in Step 1, Step 2, Step 3, Step 5, or these components. Drives Power supplies	Verify the Motherboard Verify the PDB Verify a DIMM Verify the LED Board Verify the Drive Backplane Verify a Fan Module Verify a PCIe Card Verify a SAS Drive Verify the Operation of an NVMe Storage Drive Verify a Power Supply