Determine if the PDB Is Faulty

You must determine if the PDB is faulty before you replace it.

1. Check to see if any Server Service Required LEDs are lit or flashing.

   See Front Panel Components (Service).

2. In Oracle ILOM, check the health of the power system.

   -> show /System/Power 
    /System/Power
    	Targets:
    	Properties:
    		health = OK
    		health_details = -
   ...
   ->
   

3. Verify that the PDB is faulty.

   For example, type:

   -> show faulty
   Target              | Property               | Value
   --------------------+------------------------+-------------------------------
   /SP/faultmgmt/0     | fru                    | /SYS/PDB
   ...
   ->

   • If you see /SYS/PDB under the Value heading, the PDB is faulty.

   • If a FRU value different from /SYS/PDB is displayed, see Component Service Task Reference to identify which component is faulty.

4. Use the Oracle ILOM faultmgmt shell to identify the faulty component.

   See Identify Faulted Components.

   Check the Fault class and Description fields for more information.

5. If the PDB is faulty, replace it.

   See Remove the PDB.

6. If you are unable to determine if the PDB is faulty, seek further information.

   See Detecting and Managing Faults.

Related Information

• Remove the PDB

• Verify the PDB

• Detecting and Managing Faults