After you install a fan module, you can verify its functionality.
-> set /SYS/MB/FMx clear_fault_action=true Are you sure you want to clear /SYS/MB/FM0 (y/n)? y Set 'clear_fault_action' to 'true' ->
where x is the fan module, 0 (left fan) to 4 (right fan).
-> show /SYS/MB/FMx/Fy/TACH value /SYS/MB/FM0/F0/TACH Properties: value = 3100.000 RPM ->
where:
x is the fan module, 0 (left fan) to 4 (right fan).
y is the fan element, 0 (primary) or 1 (secondary).