Power On an NVMe Drive and Attach a Device Driver

This task uses pcie13 as an example.

1. Enable the drive slot.

   # hotplug enable pciex

   where x is the slot number. See Device Paths.

2. Display the status of the NVMe drive.

   ---

   Note -  The state of the slot must be Enabled.

   ---

   # hotplug list –lc
   Connection  State    Description     Path
   ------------------------------------------------------------------
   pcie13      Enabled  PCIe-Native     /pci@300/pci@1/pci@a

3. Check the NVMe drive information.

   # nvmeadm list

4. Verify the operation of the drive.

   See Verify the Operation of an NVMe Storage Drive.

Related Information

• Install an NVMe Drive

• Verify the Operation of an NVMe Storage Drive