Remove the PSU Duct

1. Complete these prerequisites in this order.

   See:

   • Remove the Top Cover

   • Rotate the Drive Cage to the Service Position

2. Remove the USB cable from the channel in the PSU duct.
3. Lift the PSU duct straight up and off of the alignment pins.
   
4. Set the PSU duct aside.
5. Consider your next step.

   See:

   • Servicing the eUSB Drive

   • Servicing the USB Board

   • Servicing DIMMs

   • Servicing the PDB

   • Servicing the Cables

Related Information

• Remove the Air Duct

• Install the PSU Duct