Verify the Drive Backplane
After you install the drive backplane, you can verify its functionality.
-
Access Oracle ILOM.
See Log In to Oracle ILOM (Service).
-
Reset the drive backplane.
-> set /SYS/DBP clear_fault_action=true
Are you sure you want to clear /SYS/DBP (y/n)? y
Set 'clear_fault_action' to 'true'
->
-
Verify that the drive backplane is not faulty, then return to this procedure.
See Determine if the Drive Backplane Is Faulty.
-
Verify that the installed drives are recognized.
-> show /SYS/DBP
/SYS/DBP
Targets:
HDD0
HDD1
HDD2
...
->