ibping - ping an InfiniBand address
ibping [options] <dest lid | guid>
IBPING(8) Open IB Diagnostics IBPING(8)
NAME
IBPING - ping an InfiniBand address
SYNOPSIS
ibping [options] <dest lid | guid>
DESCRIPTION
ibping uses vendor mads to validate connectivity between IB nodes. On
exit, (IP) ping like output is show. ibping is run as client/server.
Default is to run as client. Note also that a default ping server is
implemented within the kernel.
OPTIONS
-c, --count stop after count packets
-f, --flood flood destination: send packets back to back without delay
-o, --oui use specified OUI number to multiplex vendor mads
-S, --Server start in server mode (do not return)
Addressing Flags
-L, --Lid The address specified is a LID
-G, --Guid The address specified is a Port GUID
-s, --sm_port <smlid> use 'smlid' as the target lid for SA queries.
Port Selection flags
-C, --Ca <ca_name> use the specified ca_name.
-P, --Port <ca_port> use the specified ca_port.
Local port Selection
Multiple port/Multiple CA support: when no IB device or port is speci-
fied (see the "local umad parameters" below), the libibumad library
selects the port to use by the following criteria:
1. the first port that is ACTIVE.
2. if not found, the first port that is UP (physical link up).
If a port and/or CA name is specified, the libibumad library
attempts to fulfill the user request, and will fail if it is not
possible.
For example:
ibaddr # use the first port (criteria #1 above)
ibaddr -C mthca1 # pick the best port from "mthca1" only.
ibaddr -P 2 # use the second (active/up) port from the first available IB device.
ibaddr -C mthca0 -P 2 # use the specified port only.
Configuration flags
--config, -z <config_file> Specify alternate config file.
Default: /etc/infiniband/infiniband-diags/ibdiag.conf
-t, --timeout <timeout_ms> override the default timeout for the
solicited mads.
Debugging flags
-h, --help show the usage message
-d raise the IB debugging level. May be used several times (-ddd
or -d -d -d).
-e show send and receive errors (timeouts and others)
-v, --verbose
increase the application verbosity level. May be used several
times (-vv or -v -v -v)
-V, --version show the version info.
FILES
CONFIG FILE
/etc/infiniband/infiniband-diags/ibdiag.conf
A global config file is provided to set some of the common options for
all tools. See supplied config file for details.
AUTHOR
Hal Rosenstock
< halr@voltaire.com >
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
+---------------+-----------------------+
|ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+---------------+-----------------------+
|Availability | network/open-fabrics |
+---------------+-----------------------+
|Stability | Pass-through volatile |
+---------------+-----------------------+
NOTES
This software was built from source available at
https://github.com/oracle/solaris-userland. The original community
source was downloaded from ['https://www.openfabrics.org/down-
loads/ibutils/ibutils-1.5.7-0.2.gbd7e502.tar.gz', 'https://www.openfab-
rics.org/downloads/libibverbs/libibverbs-1.1.8.tar.gz',
'https://www.openfabrics.org/downloads/libmlx4/libmlx4-1.0.6.tar.gz',
'https://www.openfabrics.org/downloads/libsdp/lib-
sdp-1.1.108-0.15.gd7fdb72.tar.gz', 'https://www.openfabrics.org/down-
loads/management/infiniband-diags-1.6.5.tar.gz', 'https://www.openfab-
rics.org/downloads/management/libibmad-1.3.12.tar.gz',
'https://www.openfabrics.org/downloads/management/libibu-
mad-1.3.10.2.tar.gz', 'https://www.openfabrics.org/downloads/manage-
ment/opensm-3.3.19.tar.gz', 'https://www.openfabrics.org/down-
loads/perftest/perftest-1.3.0-0.42.gf350d3d.tar.gz', 'https://www.open-
fabrics.org/downloads/qperf/qperf-0.4.9.tar.gz', 'https://www.openfab-
rics.org/downloads/rdmacm/librdmacm-1.0.21.tar.gz', 'https://www.open-
fabrics.org/downloads/rds-tools/rds-tools-2.0.4.tar.gz']
Further information about this software can be found on the open source
community website at http://www.openfabrics.org/.
IBPING(8)