sg_zone - send SCSI OPEN, CLOSE or FINISH ZONE command
sg_zone [--all] [--close] [--finish] [--help] [--open] [--verbose] [--version] [--zone=ID] DEVICE
SG_ZONE(8) SG3_UTILS SG_ZONE(8) NAME sg_zone - send SCSI OPEN, CLOSE or FINISH ZONE command SYNOPSIS sg_zone [--all] [--close] [--finish] [--help] [--open] [--verbose] [--version] [--zone=ID] DEVICE DESCRIPTION Sends a SCSI OPEN ZONE, CLOSE ZONE or FINISH ZONE command to the DEVICE. These commands are found in the ZBC draft standard revision 4c (zbc-r04c.pdf). One and only one of the --open, --close and --finish options can be chosen. OPTIONS Arguments to long options are mandatory for short options as well. -a, --all sets the ALL field in the cdb. -c, --close causes the CLOSE ZONE command to be sent to the DEVICE. -f, --finish causes the FINISH ZONE command to be sent to the DEVICE. -h, --help output the usage message then exit. -o, --open causes the OPEN ZONE command to be sent to the DEVICE. -v, --verbose increase the level of verbosity, (i.e. debug output). -V, --version print the version string and then exit. -z, --zone=ID where ID is placed in the cdb's ZONE ID field. A zone id is a zone start logical block address (LBA). The default value is 0. ID is assumed to be in decimal unless prefixed with '0x' or has a trailing 'h' which indicate hexadecimal. EXIT STATUS The exit status of sg_zone is 0 when it is successful. Otherwise see the sg3_utils(8) man page. AUTHORS Written by Douglas Gilbert. REPORTING BUGS Report bugs to <dgilbert at interlog dot com>. COPYRIGHT Copyright (C) 2014-2015 Douglas Gilbert This software is distributed under a FreeBSD license. There is NO war- ranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR- POSE. ATTRIBUTES See attributes(7) for descriptions of the following attributes: +---------------+--------------------------+ |ATTRIBUTE TYPE | ATTRIBUTE VALUE | +---------------+--------------------------+ |Availability | system/storage/sg3_utils | +---------------+--------------------------+ |Stability | Pass-through uncommitted | +---------------+--------------------------+ SEE ALSO sg_rep_zones,sg_reset_wp(sg3_utils) NOTES This software was built from source available at https://github.com/oracle/solaris-userland. The original community source was downloaded from http://sg.danny.cz/sg/p/sg3_utils-1.42.tgz Further information about this software can be found on the open source community website at http://sg.danny.cz/sg/sg3_utils.html. sg3_utils-1.42 November 2015 SG_ZONE(8)