certtool - GnuTLS certificate tool
certtool [-flags] [-flag [value]] [--option-name[[=| ]value]] All arguments must be options.
certtool(1) User Commands certtool(1)
NAME
certtool - GnuTLS certificate tool
SYNOPSIS
certtool [-flags] [-flag [value]] [--option-name[[=| ]value]]
All arguments must be options.
DESCRIPTION
Tool to parse and generate X.509 certificates, requests and private
keys. It can be used interactively or non interactively by specifying
the template command line option.
The tool accepts files or URLs supported by GnuTLS. In case PIN is
required for the URL access you can provide it using the environment
variables GNUTLS_PIN and GNUTLS_SO_PIN.
OPTIONS
-d number, --debug=number
Enable debugging. This option takes an integer number as its
argument. The value of number is constrained to being:
in the range 0 through 9999
Specifies the debug level.
-V, --verbose
More verbose output. This option may appear an unlimited number
of times.
--infile=file
Input file.
--outfile=string
Output file.
-s, --generate-self-signed
Generate a self-signed certificate.
-c, --generate-certificate
Generate a signed certificate.
--generate-proxy
Generates a proxy certificate.
--generate-crl
Generate a CRL.
This option generates a CRL. When combined with --load-crl it
would use the loaded CRL as base for the generated (i.e., all
revoked certificates in the base will be copied to the new CRL).
-u, --update-certificate
Update a signed certificate.
-p, --generate-privkey
Generate a private key.
--provable
Generate a private key or parameters from a seed using a prov-
able method.
This will use the FIPS-186-4 algorithms (i.e., Shawe-Taylor) for
provable key generation. When specified the private keys or
parameters will be generated from a seed, and can be later vali-
dated with --verify-provable-privkey to be correctly generated
from the seed. You may specify --seed or allow GnuTLS to gener-
ate one (recommended). This option can be combined with --gener-
ate-privkey or --generate-dh-params.
That option applies to RSA and DSA keys. On the DSA keys the PQG
parameters are generated using the seed, and on RSA the two
primes.
--verify-provable-privkey
Verify a private key generated from a seed using a provable
method.
This will use the FIPS-186-4 algorithms for provable key genera-
tion. You may specify --seed or use the seed stored in the pri-
vate key structure.
--seed=string
When generating a private key use the given hex-encoded seed.
-q, --generate-request
Generate a PKCS #10 certificate request. This option must not
appear in combination with any of the following options: infile.
Will generate a PKCS #10 certificate request. To specify a pri-
vate key use --load-privkey.
-e, --verify-chain
Verify a PEM encoded certificate chain.
The last certificate in the chain must be a self signed one. It
can be combined with --verify-purpose or --verify-hostname.
--verify
Verify a PEM encoded certificate chain using a trusted list.
The trusted certificate list can be loaded with --load-ca-cer-
tificate. If no certificate list is provided, then the system's
certificate list is used. Note that during verification multiple
paths may be explored. On a successful verification the success-
ful path will be the last one. It can be combined with --verify-
purpose or --verify-hostname.
--verify-crl
Verify a CRL using a trusted list. This option must appear in
combination with the following options: load-ca-certificate.
The trusted certificate list must be loaded with --load-ca-cer-
tificate.
--verify-hostname=string
Specify a hostname to be used for certificate chain verifica-
tion.
This is to be combined with one of the verify certificate
options.
--verify-email=string
Specify a email to be used for certificate chain verification.
This option must not appear in combination with any of the fol-
lowing options: verify-hostname.
This is to be combined with one of the verify certificate
options.
--verify-purpose=string
Specify a purpose OID to be used for certificate chain verifica-
tion.
This object identifier restricts the purpose of the certificates
to be verified. Example purposes are 1.3.6.1.5.5.7.3.1 (TLS
WWW), 1.3.6.1.5.5.7.3.4 (EMAIL) etc. Note that a CA certificate
without a purpose set (extended key usage) is valid for any pur-
pose.
--verify-allow-broken
Allow broken algorithms, such as MD5 for verification.
This can be combined with --p7-verify, --verify or --verify-
chain.
--generate-dh-params
Generate PKCS #3 encoded Diffie-Hellman parameters.
The will generate random parameters to be used with Diffie-Hell-
man key exchange. The output parameters will be in PKCS #3 for-
mat. Note that it is recommended to use the --get-dh-params
option instead.
--get-dh-params
Get the included PKCS #3 encoded Diffie-Hellman parameters.
Returns stored DH parameters in GnuTLS. Those parameters
returned are defined in RFC7919, and can be considered standard
parameters for a TLS key exchange.
--dh-info
Print information PKCS #3 encoded Diffie-Hellman parameters.
--load-privkey=string
Loads a private key file.
This can be either a file or a PKCS #11 URL
--load-pubkey=string
Loads a public key file.
This can be either a file or a PKCS #11 URL
--load-request=string
Loads a certificate request file.
This option can be used with a file
--load-certificate=string
Loads a certificate file.
This option can be used with a file
--load-ca-privkey=string
Loads the certificate authority's private key file.
This can be either a file or a PKCS #11 URL
--load-ca-certificate=string
Loads the certificate authority's certificate file.
This option can be used with a file
--load-crl=string
Loads the provided CRL.
This option can be used with a file
--load-data=string
Loads auxiliary data.
This option can be used with a file
--password=string
Password to use.
You can use this option to specify the password in the command
line instead of reading it from the tty. Note, that the command
line arguments are available for view in others in the system.
Specifying password as '' is the same as specifying no password.
--null-password
Enforce a NULL password.
This option enforces a NULL password. This is different than the
empty or no password in schemas like PKCS #8.
--empty-password
Enforce an empty password.
This option enforces an empty password. This is different than
the NULL or no password in schemas like PKCS #8.
--hex-numbers
Print big number in an easier format to parse.
--cprint
In certain operations it prints the information in C-friendly
format.
In certain operations it prints the information in C-friendly
format, suitable for including into C programs.
-i, --certificate-info
Print information on the given certificate.
--fingerprint
Print the fingerprint of the given certificate.
This is a simple hash of the DER encoding of the certificate. It
can be combined with the --hash parameter. However, it is recom-
mended for identification to use the key-id which depends only
on the certificate's key.
--key-id
Print the key ID of the given certificate.
This is a hash of the public key of the given certificate. It
identifies the key uniquely, remains the same on a certificate
renewal and depends only on signed fields of the certificate.
--certificate-pubkey
Print certificate's public key.
--pgp-certificate-info
Print information on the given OpenPGP certificate.
--pgp-ring-info
Print information on the given OpenPGP keyring structure.
-l, --crl-info
Print information on the given CRL structure.
--crq-info
Print information on the given certificate request.
--no-crq-extensions
Do not use extensions in certificate requests.
--p12-info
Print information on a PKCS #12 structure.
This option will dump the contents and print the metadata of the
provided PKCS #12 structure.
--p12-name=string
The PKCS #12 friendly name to use.
The name to be used for the primary certificate and private key
in a PKCS #12 file.
--p7-generate
Generate a PKCS #7 structure.
This option generates a PKCS #7 certificate container structure.
To add certificates in the structure use --load-certificate and
--load-crl.
--p7-sign
Signs using a PKCS #7 structure.
This option generates a PKCS #7 structure containing a signature
for the provided data from infile. The data are stored within
the structure. The signer certificate has to be specified using
--load-certificate and --load-privkey. The input to --load-cer-
tificate can be a list of certificates. In case of a list, the
first certificate is used for signing and the other certificates
are included in the structure.
--p7-detached-sign
Signs using a detached PKCS #7 structure.
This option generates a PKCS #7 structure containing a signature
for the provided data from infile. The signer certificate has to
be specified using --load-certificate and --load-privkey. The
input to --load-certificate can be a list of certificates. In
case of a list, the first certificate is used for signing and
the other certificates are included in the structure.
--p7-include-cert, --no-p7-include-cert
The signer's certificate will be included in the cert list..
The no-p7-include-cert form will disable the option. This
option is enabled by default.
This options works with --p7-sign or --p7-detached-sign and will
include or exclude the signer's certificate into the generated
signature.
--p7-time, --no-p7-time
Will include a timestamp in the PKCS #7 structure. The
no-p7-time form will disable the option.
This option will include a timestamp in the generated signature
--p7-show-data, --no-p7-show-data
Will show the embedded data in the PKCS #7 structure. The
no-p7-show-data form will disable the option.
This option can be combined with --p7-verify or --p7-info and
will display the embedded signed data in the PKCS #7 structure.
--p7-info
Print information on a PKCS #7 structure.
--p7-verify
Verify the provided PKCS #7 structure.
This option verifies the signed PKCS #7 structure. The certifi-
cate list to use for verification can be specified with --load-
ca-certificate. When no certificate list is provided, then the
system's certificate list is used. Alternatively a direct signer
can be provided using --load-certificate. A key purpose can be
enforced with the --verify-purpose option, and the --load-data
option will utilize detached data.
--p8-info
Print information on a PKCS #8 structure.
This option will print information about encrypted PKCS #8
structures. That option does not require the decryption of the
structure.
--smime-to-p7
Convert S/MIME to PKCS #7 structure.
-k, --key-info
Print information on a private key.
--pgp-key-info
Print information on an OpenPGP private key.
--pubkey-info
Print information on a public key.
The option combined with --load-request, --load-pubkey, --load-
privkey and --load-certificate will extract the public key of
the object in question.
--v1 Generate an X.509 version 1 certificate (with no extensions).
--to-p12
Generate a PKCS #12 structure.
It requires a certificate, a private key and possibly a CA cer-
tificate to be specified.
--to-p8
Generate a PKCS #8 structure.
-8, --pkcs8
Use PKCS #8 format for private keys.
--rsa Generate RSA key.
When combined with --generate-privkey generates an RSA private
key.
--dsa Generate DSA key.
When combined with --generate-privkey generates a DSA private
key.
--ecc Generate ECC (ECDSA) key.
When combined with --generate-privkey generates an elliptic
curve private key to be used with ECDSA.
--ecdsa
This is an alias for the --ecc option.
--hash=string
Hash algorithm to use for signing.
Available hash functions are SHA1, RMD160, SHA256, SHA384,
SHA512, SHA3-224, SHA3-256, SHA3-384, SHA3-512.
--inder, --no-inder
Use DER format for input certificates, private keys, and DH
parameters . The no-inder form will disable the option.
The input files will be assumed to be in DER or RAW format.
Unlike options that in PEM input would allow multiple input data
(e.g. multiple certificates), when reading in DER format a sin-
gle data structure is read.
--inraw
This is an alias for the --inder option.
--outder, --no-outder
Use DER format for output certificates, private keys, and DH
parameters. The no-outder form will disable the option.
The output will be in DER or RAW format.
--outraw
This is an alias for the --outder option.
--bits=number
Specify the number of bits for key generate. This option takes
an integer number as its argument.
--curve=string
Specify the curve used for EC key generation.
Supported values are secp192r1, secp224r1, secp256r1, secp384r1
and secp521r1.
--sec-param=security parameter
Specify the security level [low, legacy, medium, high, ultra].
This is alternative to the bits option.
--disable-quick-random
No effect.
--template=string
Template file to use for non-interactive operation.
--stdout-info
Print information to stdout instead of stderr.
--ask-pass
Enable interaction for entering password when in batch mode..
This option will enable interaction to enter password when in
batch mode. That is useful when the template option has been
specified.
--pkcs-cipher=cipher
Cipher to use for PKCS #8 and #12 operations.
Cipher may be one of 3des, 3des-pkcs12, aes-128, aes-192,
aes-256, rc2-40, arcfour.
--provider=string
Specify the PKCS #11 provider library.
This will override the default options in
/etc/gnutls/pkcs11.conf
-h, --help
Display usage information and exit.
-!, --more-help
Pass the extended usage information through a pager.
-v [{v|c|n --version [{v|c|n}]}]
Output version of program and exit. The default mode is `v', a
simple version. The `c' mode will print copyright information
and `n' will print the full copyright notice.
FILES
Certtool's template file format
A template file can be used to avoid the interactive questions of cert-
tool. Initially create a file named 'cert.cfg' that contains the infor-
mation about the certificate. The template can be used as below:
$ certtool --generate-certificate --load-privkey key.pem --template cert.cfg --outfile cert.pem --load-ca-certificate ca-cert.pem --load-ca-privkey ca-key.pem
An example certtool template file that can be used to generate a cer-
tificate request or a self signed certificate follows.
# X.509 Certificate options
#
# DN options
# The organization of the subject.
organization = "Koko inc."
# The organizational unit of the subject.
unit = "sleeping dept."
# The locality of the subject.
# locality =
# The state of the certificate owner.
state = "Attiki"
# The country of the subject. Two letter code.
country = GR
# The common name of the certificate owner.
cn = "Cindy Lauper"
# A user id of the certificate owner.
#uid = "clauper"
# Set domain components
#dc = "name"
#dc = "domain"
# If the supported DN OIDs are not adequate you can set
# any OID here.
# For example set the X.520 Title and the X.520 Pseudonym
# by using OID and string pairs.
#dn_oid = "2.5.4.12 Dr."
#dn_oid = "2.5.4.65 jackal"
# This is deprecated and should not be used in new
# certificates.
# pkcs9_email = "none@none.org"
# An alternative way to set the certificate's distinguished name directly
# is with the "dn" option. The attribute names allowed are:
# C (country), street, O (organization), OU (unit), title, CN (common name),
# L (locality), ST (state), placeOfBirth, gender, countryOfCitizenship,
# countryOfResidence, serialNumber, telephoneNumber, surName, initials,
# generationQualifier, givenName, pseudonym, dnQualifier, postalCode, name,
# businessCategory, DC, UID, jurisdictionOfIncorporationLocalityName,
# jurisdictionOfIncorporationStateOrProvinceName,
# jurisdictionOfIncorporationCountryName, XmppAddr, and numeric OIDs.
#dn = "cn = Nikos,st = New Something,C=GR,surName=Mavrogiannopoulos,2.5.4.9=Arkadias"
# The serial number of the certificate
# Comment the field for a time-based serial number.
serial = 007
# In how many days, counting from today, this certificate will expire.
# Use -1 if there is no expiration date.
expiration_days = 700
# Alternatively you may set concrete dates and time. The GNU date string
# formats are accepted. See:
# http://www.gnu.org/software/tar/manual/html_node/Date-input-formats.html
#activation_date = "2004-02-29 16:21:42"
#expiration_date = "2025-02-29 16:24:41"
# X.509 v3 extensions
# A dnsname in case of a WWW server.
#dns_name = "www.none.org"
#dns_name = "www.morethanone.org"
# An othername defined by an OID and a hex encoded string
#other_name = "1.3.6.1.5.2.2 302ca00d1b0b56414e5245494e2e4f5247a11b3019a006020400000002a10f300d1b047269636b1b0561646d696e"
#other_name_utf8 = "1.2.4.5.6 A UTF8 string"
#other_name_octet = "1.2.4.5.6 A string that will be encoded as ASN.1 octet string"
# Allows writing an XmppAddr Identifier
#xmpp_name = juliet@im.example.com
# Names used in PKINIT
#krb5_principal = user@REALM.COM
#krb5_principal = HTTP/user@REALM.COM
# A subject alternative name URI
#uri = "http://www.example.com"
# An IP address in case of a server.
#ip_address = "192.168.1.1"
# An email in case of a person
email = "none@none.org"
# TLS feature (rfc7633) extension. That can is used to indicate mandatory TLS
# extension features to be provided by the server. In practice this is used
# to require the Status Request (extid: 5) extension from the server. That is,
# to require the server holding this certificate to provide a stapled OCSP response.
# You can have multiple lines for multiple TLS features.
# To ask for OCSP status request use:
#tls_feature = 5
# Challenge password used in certificate requests
challenge_password = 123456
# Password when encrypting a private key
#password = secret
# An URL that has CRLs (certificate revocation lists)
# available. Needed in CA certificates.
#crl_dist_points = "http://www.getcrl.crl/getcrl/"
# Whether this is a CA certificate or not
#ca
# Subject Unique ID (in hex)
#subject_unique_id = 00153224
# Issuer Unique ID (in hex)
#issuer_unique_id = 00153225
#### Key usage
# The following key usage flags are used by CAs and end certificates
# Whether this certificate will be used to sign data (needed
# in TLS DHE ciphersuites). This is the digitalSignature flag
# in RFC5280 terminology.
signing_key
# Whether this certificate will be used to encrypt data (needed
# in TLS RSA ciphersuites). Note that it is preferred to use different
# keys for encryption and signing. This is the keyEncipherment flag
# in RFC5280 terminology.
encryption_key
# Whether this key will be used to sign other certificates. The
# keyCertSign flag in RFC5280 terminology.
#cert_signing_key
# Whether this key will be used to sign CRLs. The
# cRLSign flag in RFC5280 terminology.
#crl_signing_key
# The keyAgreement flag of RFC5280. It's purpose is loosely
# defined. Not use it unless required by a protocol.
#key_agreement
# The dataEncipherment flag of RFC5280. It's purpose is loosely
# defined. Not use it unless required by a protocol.
#data_encipherment
# The nonRepudiation flag of RFC5280. It's purpose is loosely
# defined. Not use it unless required by a protocol.
#non_repudiation
#### Extended key usage (key purposes)
# The following extensions are used in an end certificate
# to clarify its purpose. Some CAs also use it to indicate
# the types of certificates they are purposed to sign.
# Whether this certificate will be used for a TLS client;
# this sets the id-kp-serverAuth (1.3.6.1.5.5.7.3.1) of
# extended key usage.
#tls_www_client
# Whether this certificate will be used for a TLS server;
# This sets the id-kp-clientAuth (1.3.6.1.5.5.7.3.2) of
# extended key usage.
#tls_www_server
# Whether this key will be used to sign code. This sets the
# id-kp-codeSigning (1.3.6.1.5.5.7.3.3) of extended key usage
# extension.
#code_signing_key
# Whether this key will be used to sign OCSP data. This sets the
# id-kp-OCSPSigning (1.3.6.1.5.5.7.3.9) of extended key usage extension.
#ocsp_signing_key
# Whether this key will be used for time stamping. This sets the
# id-kp-timeStamping (1.3.6.1.5.5.7.3.8) of extended key usage extension.
#time_stamping_key
# Whether this key will be used for email protection. This sets the
# id-kp-emailProtection (1.3.6.1.5.5.7.3.4) of extended key usage extension.
#email_protection_key
# Whether this key will be used for IPsec IKE operations (1.3.6.1.5.5.7.3.17).
#ipsec_ike_key
## adding custom key purpose OIDs
# for microsoft smart card logon
# key_purpose_oid = 1.3.6.1.4.1.311.20.2.2
# for email protection
# key_purpose_oid = 1.3.6.1.5.5.7.3.4
# for any purpose (must not be used in intermediate CA certificates)
# key_purpose_oid = 2.5.29.37.0
### end of key purpose OIDs
### Adding arbitrary extensions
# This requires to provide the extension OIDs, as well as the extension data in
# hex format. The following two options are available since GnuTLS 3.5.3.
#add_extension = "1.2.3.4 0x0AAB01ACFE"
# As above but encode the data as an octet string
#add_extension = "1.2.3.4 octet_string(0x0AAB01ACFE)"
# For portability critical extensions shouldn't be set to certificates.
#add_critical_extension = "5.6.7.8 0x1AAB01ACFE"
# When generating a certificate from a certificate
# request, then honor the extensions stored in the request
# and store them in the real certificate.
#honor_crq_extensions
# Alternatively only specific extensions can be copied.
#honor_crq_ext = 2.5.29.17
#honor_crq_ext = 2.5.29.15
# Path length contraint. Sets the maximum number of
# certificates that can be used to certify this certificate.
# (i.e. the certificate chain length)
#path_len = -1
#path_len = 2
# OCSP URI
# ocsp_uri = http://my.ocsp.server/ocsp
# CA issuers URI
# ca_issuers_uri = http://my.ca.issuer
# Certificate policies
#policy1 = 1.3.6.1.4.1.5484.1.10.99.1.0
#policy1_txt = "This is a long policy to summarize"
#policy1_url = http://www.example.com/a-policy-to-read
#policy2 = 1.3.6.1.4.1.5484.1.10.99.1.1
#policy2_txt = "This is a short policy"
#policy2_url = http://www.example.com/another-policy-to-read
# Name constraints
# DNS
#nc_permit_dns = example.com
#nc_exclude_dns = test.example.com
# EMAIL
#nc_permit_email = "nmav@ex.net"
# Exclude subdomains of example.com
#nc_exclude_email = .example.com
# Exclude all e-mail addresses of example.com
#nc_exclude_email = example.com
# IP
#nc_permit_ip = 192.168.0.0/16
#nc_exclude_ip = 192.168.5.0/24
#nc_permit_ip = fc0a:eef2:e7e7:a56e::/64
# Options for proxy certificates
#proxy_policy_language = 1.3.6.1.5.5.7.21.1
# Options for generating a CRL
# The number of days the next CRL update will be due.
# next CRL update will be in 43 days
#crl_next_update = 43
# this is the 5th CRL by this CA
# Comment the field for a time-based number.
#crl_number = 5
# Specify the update dates more precisely.
#crl_this_update_date = "2004-02-29 16:21:42"
#crl_next_update_date = "2025-02-29 16:24:41"
# The date that the certificates will be made seen as
# being revoked.
#crl_revocation_date = "2025-02-29 16:24:41"
EXAMPLES
Generating private keys
To create an RSA private key, run:
$ certtool --generate-privkey --outfile key.pem --rsa
To create a DSA or elliptic curves (ECDSA) private key use the above
command combined with 'dsa' or 'ecc' options.
Generating certificate requests
To create a certificate request (needed when the certificate is issued
by another party), run:
certtool --generate-request --load-privkey key.pem --outfile request.pem
If the private key is stored in a smart card you can generate a request
by specifying the private key object URL.
$ ./certtool --generate-request --load-privkey "pkcs11:..." --load-pubkey "pkcs11:..." --outfile request.pem
Generating a self-signed certificate
To create a self signed certificate, use the command:
$ certtool --generate-privkey --outfile ca-key.pem
$ certtool --generate-self-signed --load-privkey ca-key.pem --outfile ca-cert.pem
Note that a self-signed certificate usually belongs to a certificate
authority, that signs other certificates.
Generating a certificate
To generate a certificate using the previous request, use the command:
$ certtool --generate-certificate --load-request request.pem --outfile cert.pem --load-ca-certificate ca-cert.pem --load-ca-privkey ca-key.pem
To generate a certificate using the private key only, use the command:
$ certtool --generate-certificate --load-privkey key.pem --outfile cert.pem --load-ca-certificate ca-cert.pem --load-ca-privkey ca-key.pem
Certificate information
To view the certificate information, use:
$ certtool --certificate-info --infile cert.pem
PKCS #12 structure generation
To generate a PKCS #12 structure using the previous key and certifi-
cate, use the command:
$ certtool --load-certificate cert.pem --load-privkey key.pem --to-p12 --outder --outfile key.p12
Some tools (reportedly web browsers) have problems with that file
because it does not contain the CA certificate for the certificate. To
work around that problem in the tool, you can use the --load-ca-cer-
tificate parameter as follows:
$ certtool --load-ca-certificate ca.pem --load-certificate cert.pem --load-privkey key.pem --to-p12 --outder --outfile key.p12
Diffie-Hellman parameter generation
To generate parameters for Diffie-Hellman key exchange, use the com-
mand:
$ certtool --generate-dh-params --outfile dh.pem --sec-param medium
Proxy certificate generation
Proxy certificate can be used to delegate your credential to a tempo-
rary, typically short-lived, certificate. To create one from the pre-
viously created certificate, first create a temporary key and then gen-
erate a proxy certificate for it, using the commands:
$ certtool --generate-privkey > proxy-key.pem
$ certtool --generate-proxy --load-ca-privkey key.pem --load-privkey proxy-key.pem --load-certificate cert.pem --outfile proxy-cert.pem
Certificate revocation list generation
To create an empty Certificate Revocation List (CRL) do:
$ certtool --generate-crl --load-ca-privkey x509-ca-key.pem --load-ca-certificate x509-ca.pem
To create a CRL that contains some revoked certificates, place the cer-
tificates in a file and use --load-certificate as follows:
$ certtool --generate-crl --load-ca-privkey x509-ca-key.pem --load-ca-certificate x509-ca.pem --load-certificate revoked-certs.pem
To verify a Certificate Revocation List (CRL) do:
$ certtool --verify-crl --load-ca-certificate x509-ca.pem < crl.pem
EXIT STATUS
One of the following exit values will be returned:
0 (EXIT_SUCCESS)
Successful program execution.
1 (EXIT_FAILURE)
The operation failed or the command syntax was not valid.
70 (EX_SOFTWARE)
libopts had an internal operational error. Please report it to
autogen-users@lists.sourceforge.net. Thank you.
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
+---------------+-----------------------+
|ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+---------------+-----------------------+
|Availability | library/gnutls-3 |
+---------------+-----------------------+
|Stability | Pass-through volatile |
+---------------+-----------------------+
SEE ALSO
p11tool (1)
AUTHORS
Nikos Mavrogiannopoulos, Simon Josefsson and others; see
/usr/share/doc/gnutls/AUTHORS for a complete list.
COPYRIGHT
Copyright (C) 2000-2017 Free Software Foundation, and others all rights
reserved. This program is released under the terms of the GNU General
Public License, version 3 or later.
BUGS
Please send bug reports to: bugs@gnutls.org
NOTES
This manual page was AutoGen-erated from the certtool option defini-
tions.
This software was built from source available at
https://github.com/oracle/solaris-userland. The original community
source was downloaded from
ftp://ftp.gnutls.org/gcrypt/gnutls/v3.5/gnutls-3.5.16.tar.xz
Further information about this software can be found on the open source
community website at https://www.gnutls.org/.
3.5.16 21 Oct 2017 certtool(1)