mysqlcheck - a table maintenance program
mysqlcheck [options] [db_name [tbl_name ...]]
MYSQLCHECK(1) MySQL Database System MYSQLCHECK(1)
NAME
mysqlcheck - a table maintenance program
SYNOPSIS
mysqlcheck [options] [db_name [tbl_name ...]]
DESCRIPTION
The mysqlcheck client performs table maintenance: It checks, repairs,
optimizes, or analyzes tables.
Each table is locked and therefore unavailable to other sessions while
it is being processed, although for check operations, the table is
locked with a READ lock only (see Section 13.3.5, "LOCK TABLES and
UNLOCK TABLES Syntax", for more information about READ and WRITE
locks). Table maintenance operations can be time-consuming,
particularly for large tables. If you use the --databases or
--all-databases option to process all tables in one or more databases,
an invocation of mysqlcheck might take a long time. (This is also true
for mysql_upgrade because that program invokes mysqlcheck to check all
tables and repair them if necessary.)
mysqlcheck must be used when the mysqld server is running, which means
that you do not have to stop the server to perform table maintenance.
mysqlcheck uses the SQL statements CHECK TABLE, REPAIR TABLE, ANALYZE
TABLE, and OPTIMIZE TABLE in a convenient way for the user. It
determines which statements to use for the operation you want to
perform, and then sends the statements to the server to be executed.
For details about which storage engines each statement works with, see
the descriptions for those statements in Section 13.7.2, "Table
Maintenance Statements".
All storage engines do not necessarily support all four maintenance
operations. In such cases, an error message is displayed. For example,
if test.t is an MEMORY table, an attempt to check it produces this
result:
shell> mysqlcheck test t
test.t
note : The storage engine for the table doesn't support check
If mysqlcheck is unable to repair a table, see Section 2.11.3,
"Rebuilding or Repairing Tables or Indexes" for manual table repair
strategies. This will be the case, for example, for InnoDB tables,
which can be checked with CHECK TABLE, but not repaired with REPAIR
TABLE.
Caution
It is best to make a backup of a table before performing a table
repair operation; under some circumstances the operation might
cause data loss. Possible causes include but are not limited to
file system errors.
There are three general ways to invoke mysqlcheck:
shell> mysqlcheck [options] db_name [tbl_name ...]
shell> mysqlcheck [options] --databases db_name ...
shell> mysqlcheck [options] --all-databases
If you do not name any tables following db_name or if you use the
--databases or --all-databases option, entire databases are checked.
mysqlcheck has a special feature compared to other client programs. The
default behavior of checking tables (--check) can be changed by
renaming the binary. If you want to have a tool that repairs tables by
default, you should just make a copy of mysqlcheck named mysqlrepair,
or make a symbolic link to mysqlcheck named mysqlrepair. If you invoke
mysqlrepair, it repairs tables.
The names shown in the following table can be used to change mysqlcheck
default behavior.
+--------------+-----------------------+
|Command | Meaning |
+--------------+-----------------------+
|mysqlrepair | The default option is |
| | --repair |
+--------------+-----------------------+
|mysqlanalyze | The default option is |
| | --analyze |
+--------------+-----------------------+
|mysqloptimize | The default option is |
| | --optimize |
+--------------+-----------------------+
mysqlcheck supports the following options, which can be specified on
the command line or in the [mysqlcheck] and [client] groups of an
option file. For information about option files used by MySQL programs,
see Section 4.2.6, "Using Option Files".
o --help, -?
Display a help message and exit.
o --all-databases, -A
Check all tables in all databases. This is the same as using the
--databases option and naming all the databases on the command
line, except that the INFORMATION_SCHEMA and performace_schema
databases are not checked. They can be checked by explicitly naming
them with the --databases option.
o --all-in-1, -1
Instead of issuing a statement for each table, execute a single
statement for each database that names all the tables from that
database to be processed.
o --analyze, -a
Analyze the tables.
o --auto-repair
If a checked table is corrupted, automatically fix it. Any
necessary repairs are done after all tables have been checked.
o --bind-address=ip_address
On a computer having multiple network interfaces, use this option
to select which interface to use for connecting to the MySQL
server.
o --character-sets-dir=dir_name
The directory where character sets are installed. See
Section 10.14, "Character Set Configuration".
o --check, -c
Check the tables for errors. This is the default operation.
o --check-only-changed, -C
Check only tables that have changed since the last check or that
have not been closed properly.
o --check-upgrade, -g
Invoke CHECK TABLE with the FOR UPGRADE option to check tables for
incompatibilities with the current version of the server. This
option automatically enables the --fix-db-names and
--fix-table-names options.
o --compress
Compress all information sent between the client and the server if
both support compression.
o --databases, -B
Process all tables in the named databases. Normally, mysqlcheck
treats the first name argument on the command line as a database
name and any following names as table names. With this option, it
treats all name arguments as database names.
o --debug[=debug_options], -# [debug_options]
Write a debugging log. A typical debug_options string is
d:t:o,file_name. The default is d:t:o.
o --debug-check
Print some debugging information when the program exits.
o --debug-info
Print debugging information and memory and CPU usage statistics
when the program exits.
o --default-character-set=charset_name
Use charset_name as the default character set. See Section 10.14,
"Character Set Configuration".
o --defaults-extra-file=file_name
Read this option file after the global option file but (on Unix)
before the user option file. If the file does not exist or is
otherwise inaccessible, an error occurs. file_name is interpreted
relative to the current directory if given as a relative path name
rather than a full path name.
o --defaults-file=file_name
Use only the given option file. If the file does not exist or is
otherwise inaccessible, an error occurs. file_name is interpreted
relative to the current directory if given as a relative path name
rather than a full path name.
Exception: Even with --defaults-file, client programs read
.mylogin.cnf.
o --defaults-group-suffix=str
Read not only the usual option groups, but also groups with the
usual names and a suffix of str. For example, mysqlcheck normally
reads the [client] and [mysqlcheck] groups. If the
--defaults-group-suffix=_other option is given, mysqlcheck also
reads the [client_other] and [mysqlcheck_other] groups.
o --extended, -e
If you are using this option to check tables, it ensures that they
are 100% consistent but takes a long time.
If you are using this option to repair tables, it runs an extended
repair that may not only take a long time to execute, but may
produce a lot of garbage rows also!
o --default-auth=plugin
A hint about the client-side authentication plugin to use. See
Section 6.3.9, "Pluggable Authentication".
o --enable-cleartext-plugin
Enable the mysql_clear_password cleartext authentication plugin.
(See Section 6.5.1.6, "Client-Side Cleartext Pluggable
Authentication".)
This option was added in MySQL 5.7.10.
o --fast, -F
Check only tables that have not been closed properly.
o --fix-db-names
Convert database names to 5.1 format. Only database names that
contain special characters are affected.
This option is deprecated in MySQL 5.7.6 and will be removed in a
future version of MySQL. If it is necessary to convert MySQL 5.0
database or table names, a workaround is to upgrade a MySQL 5.0
installation to MySQL 5.1 before upgrading to a more recent
release.
o --fix-table-names
Convert table names to 5.1 format. Only table names that contain
special characters are affected. This option also applies to views.
This option is deprecated in MySQL 5.7.6 and will be removed in a
future version of MySQL. If it is necessary to convert MySQL 5.0
database or table names, a workaround is to upgrade a MySQL 5.0
installation to MySQL 5.1 before upgrading to a more recent
release.
o --force, -f
Continue even if an SQL error occurs.
o --get-server-public-key
Request from the server the public key required for RSA key
pair-based password exchange. This option applies to clients that
that authenticate with the caching_sha2_password authentication
plugin. For that plugin, the server does not send the public key
unless requested. This option is ignored for accounts that do not
authenticate with that plugin. It is also ignored if RSA-based
password exchange is not used, as is the case when the client
connects to the server using a secure connection.
If --server-public-key-path=file_name is given and specifies a
valid public key file, it takes precedence over
--get-server-public-key.
For information about the caching_sha2_password plugin, see
Section 6.5.1.5, "Caching SHA-2 Pluggable Authentication".
The --get-server-public-key option was added in MySQL 5.7.23.
o --host=host_name, -h host_name
Connect to the MySQL server on the given host.
o --login-path=name
Read options from the named login path in the .mylogin.cnf login
path file. A "login path" is an option group containing options
that specify which MySQL server to connect to and which account to
authenticate as. To create or modify a login path file, use the
mysql_config_editor utility. See mysql_config_editor(1).
o --medium-check, -m
Do a check that is faster than an --extended operation. This finds
only 99.99% of all errors, which should be good enough in most
cases.
o --no-defaults
Do not read any option files. If program startup fails due to
reading unknown options from an option file, --no-defaults can be
used to prevent them from being read.
The exception is that the .mylogin.cnf file, if it exists, is read
in all cases. This permits passwords to be specified in a safer way
than on the command line even when --no-defaults is used.
(.mylogin.cnf is created by the mysql_config_editor utility. See
mysql_config_editor(1).)
o --optimize, -o
Optimize the tables.
o --password[=password], -p[password]
The password to use when connecting to the server. If you use the
short option form (-p), you cannot have a space between the option
and the password. If you omit the password value following the
--password or -p option on the command line, mysqlcheck prompts for
one.
Specifying a password on the command line should be considered
insecure. See Section 6.1.2.1, "End-User Guidelines for Password
Security". You can use an option file to avoid giving the password
on the command line.
o --pipe, -W
On Windows, connect to the server using a named pipe. This option
applies only if the server supports named-pipe connections.
o --plugin-dir=dir_name
The directory in which to look for plugins. Specify this option if
the --default-auth option is used to specify an authentication
plugin but mysqlcheck does not find it. See Section 6.3.9,
"Pluggable Authentication".
o --port=port_num, -P port_num
The TCP/IP port number to use for the connection.
o --print-defaults
Print the program name and all options that it gets from option
files.
o --protocol={TCP|SOCKET|PIPE|MEMORY}
The connection protocol to use for connecting to the server. It is
useful when the other connection parameters normally would cause a
protocol to be used other than the one you want. For details on the
permissible values, see Section 4.2.2, "Connecting to the MySQL
Server".
o --quick, -q
If you are using this option to check tables, it prevents the check
from scanning the rows to check for incorrect links. This is the
fastest check method.
If you are using this option to repair tables, it tries to repair
only the index tree. This is the fastest repair method.
o --repair, -r
Perform a repair that can fix almost anything except unique keys
that are not unique.
o --secure-auth
Do not send passwords to the server in old (pre-4.1) format. This
prevents connections except for servers that use the newer password
format.
As of MySQL 5.7.5, this option is deprecated and will be removed in
a future MySQL release. It is always enabled and attempting to
disable it (--skip-secure-auth, --secure-auth=0) produces an error.
Before MySQL 5.7.5, this option is enabled by default but can be
disabled.
Note
Passwords that use the pre-4.1 hashing method are less secure
than passwords that use the native password hashing method and
should be avoided. Pre-4.1 passwords are deprecated and support
for them was removed in MySQL 5.7.5. For account upgrade
instructions, see Section 6.5.1.3, "Migrating Away from Pre-4.1
Password Hashing and the mysql_old_password Plugin".
o --server-public-key-path=file_name
The path name to a file containing a client-side copy of the public
key required by the server for RSA key pair-based password
exchange. The file must be in PEM format. This option applies to
clients that authenticate with the sha256_password or
caching_sha2_password authentication plugin. This option is ignored
for accounts that do not authenticate with one of those plugins. It
is also ignored if RSA-based password exchange is not used, as is
the case when the client connects to the server using a secure
connection.
If --server-public-key-path=file_name is given and specifies a
valid public key file, it takes precedence over
--get-server-public-key.
For sha256_password, this option applies only if MySQL was built
using OpenSSL.
For information about the sha256_password and caching_sha2_password
plugins, see Section 6.5.1.4, "SHA-256 Pluggable Authentication",
and Section 6.5.1.5, "Caching SHA-2 Pluggable Authentication".
The --server-public-key-path option was added in MySQL 5.7.23.
o --shared-memory-base-name=name
On Windows, the shared-memory name to use, for connections made
using shared memory to a local server. The default value is MYSQL.
The shared-memory name is case-sensitive.
The server must be started with the --shared-memory option to
enable shared-memory connections.
o --silent, -s
Silent mode. Print only error messages.
o --skip-database=db_name
Do not include the named database (case-sensitive) in the
operations performed by mysqlcheck.
o --socket=path, -S path
For connections to localhost, the Unix socket file to use, or, on
Windows, the name of the named pipe to use.
o --ssl*
Options that begin with --ssl specify whether to connect to the
server using SSL and indicate where to find SSL keys and
certificates. See Section 6.4.2, "Command Options for Encrypted
Connections".
o --tables
Override the --databases or -B option. All name arguments following
the option are regarded as table names.
o --tls-version=protocol_list
The protocols permitted by the client for encrypted connections.
The value is a comma-separated list containing one or more protocol
names. The protocols that can be named for this option depend on
the SSL library used to compile MySQL. For details, see
Section 6.4.6, "Encrypted Connection Protocols and Ciphers".
This option was added in MySQL 5.7.10.
o --use-frm
For repair operations on MyISAM tables, get the table structure
from the .frm file so that the table can be repaired even if the
.MYI header is corrupted.
o --user=user_name, -u user_name
The MySQL user name to use when connecting to the server.
o --verbose, -v
Verbose mode. Print information about the various stages of program
operation.
o --version, -V
Display version information and exit.
o --write-binlog
This option is enabled by default, so that ANALYZE TABLE, OPTIMIZE
TABLE, and REPAIR TABLE statements generated by mysqlcheck are
written to the binary log. Use --skip-write-binlog to cause
NO_WRITE_TO_BINLOG to be added to the statements so that they are
not logged. Use the --skip-write-binlog when these statements
should not be sent to replication slaves or run when using the
binary logs for recovery from backup.
COPYRIGHT
Copyright (C) 1997, 2018, Oracle and/or its affiliates. All rights
reserved.
This documentation is free software; you can redistribute it and/or
modify it only under the terms of the GNU General Public License as
published by the Free Software Foundation; version 2 of the License.
This documentation is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License along
with the program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or see
http://www.gnu.org/licenses/.
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
+---------------+--------------------------+
|ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+---------------+--------------------------+
|Availability | database/mysql-57/client |
+---------------+--------------------------+
|Stability | Uncommitted |
+---------------+--------------------------+
SEE ALSO
For more information, please refer to the MySQL Reference Manual, which
may already be installed locally and which is also available online at
http://dev.mysql.com/doc/.
AUTHOR
Oracle Corporation (http://dev.mysql.com/).
NOTES
This software was built from source available at
https://github.com/oracle/solaris-userland. The original community
source was downloaded from
https://dev.mysql.com/get/Downloads/MySQL-5.7/mysql-boost-5.7.23.tar.gz
Further information about this software can be found on the open source
community website at https://dev.mysql.com/.
MySQL 5.7 06/07/2018 MYSQLCHECK(1)