Returning the Server to Operation

Language:

These topics explain how to return the Netra Server X5-2 from Oracle to operation after you perform service procedures.

Step	Task	Link
1.	Install the PSU duct if you serviced these components: USB board Motherboard PDB PDB signal cable	Install the PSU Duct
2.	Install the air duct if you serviced the components in Step 1 or these components: DIMMs LED board	Install the Air Duct
3.	Secure the drive cage if you serviced the components in Step 1, Step 2, or the drive backplane.	Secure the Drive Cage
4.	Install the fan tray if you serviced the components in Step 1, Step 2, Step 3, or these components: Drive signal cable Drive power cable DVD SATA cable	Install the Fan Tray
5.	Install the top cover if you serviced the components in Step 1, Step 2, Step 3, Step 4 or these components: Fan modules PCIe cards Battery USB flash drive	Install the Top Cover
6.	Install the server into the rack.	See Netra Server X5-2 Installation Guide, install the server into the rack.
7.	Connect power cords to the server.	Connect Power Cords
8.	Power on the server by one of two methods.	Power On the Server (Oracle ILOM) Power On the Server (Power Button)
9.	Verify the installation of the component, if you serviced the components in Step 1, Step 2, Step 3, Step 5, or these components: Drives DVD drive Power supplies	Verify the Motherboard Verify the PDB Verify a DIMM Verify the LED Board Verify the Drive Backplane Verify a Fan Module Verify a PCIe Card Verify a SAS Drive Verify a Power Supply