Remove the NVMe Switch Card Cables
 | Caution - The system supplies power to the cables even when the server is powered off. To avoid personal injury or damage to the server, you must disconnect power cords before servicing the cables. |
- Prepare the server for service.
-
Disconnect the NVMe cables from the Oracle PCIe NVMe switch card.
Press each latch, and then pull out to disengage the cable from each connector.
-
Disconnect the NVMe cables from the front storage drive backplane.
Press each latch, and then pull out to disengage the cable from each connector.
-
Remove the NVMe cables from the server.
Carefully remove the NVMe cable bundle from the chassis. Be careful not to snag the cables on the server components.