Power On an NVMe Storage Drive and Attach a Device Driver (Oracle Linux) - Netra Server X5-2 Service Manual

Netra Server X5-2 Service Manual

Exit Print View

» ...Documentation Home » Netra Server X5-2 Documentation Library » Netra Server X5-2 Service Manual » Servicing NVMe Storage Drives, Switch Card, ... » Power On an NVMe Storage Drive and Attach a ...

Updated: October 2016

Netra Server X5-2 Service Manual

Document Information

Using This Documentation

Identifying Components

Detecting and Managing Faults

Preparing for Service

Servicing the Filter

Servicing SAS Drives

Servicing NVMe Storage Drives, Switch Card, and Cables

Unmount an NVMe Storage Drive (Oracle Solaris)

Unmount an NVMe Storage Drive (Oracle Linux)

Remove an NVMe Storage Drive

Verify Removal of an NVMe Storage Drive (Oracle Solaris)

Verify Removal of an NVMe Storage Drive (Oracle Linux)

Remove the NVMe Switch Card Cables

Install the NVMe Switch Card Cables

Remove the NVMe Switch Card

Install an NVMe Switch Card

Install an NVMe Storage Drive

Power On an NVMe Storage Drive and Attach a Device Driver (Oracle Solaris)

Power On an NVMe Storage Drive and Attach a Device Driver (Oracle Linux)

Verify the Operation of an NVMe Storage Drive

Servicing the DVD Drive

Servicing Power Supplies

Servicing Fan Modules

Servicing PCIe Cards

Servicing the Battery

Servicing the USB Flash Drive

Servicing the System Cables

Servicing the Drive Backplane

Servicing DIMMs

Servicing the LED Board

Servicing the USB Board

Servicing the Motherboard

Servicing the PDB

Returning the Server to Operation

Language:

Power On an NVMe Storage Drive and Attach a Device Driver (Oracle Linux)

At the BIOS prompt, type:
```
echo 1 > /sys/bus/pci/slots/slot-number/power
```
where slot-number is the slot number for the NVMe storage drive.

Related Information

Copyright © 2015, 2016, Oracle and/or its affiliates. All rights reserved. Legal Notices