Locate the Server

You can use the Locator LEDs to pinpoint the location of a server. This procedure is helpful when you need to identify one particular server from many other servers.

1. Access Oracle ILOM.

   See Access the SP (Oracle ILOM).

2. If you have not already done so, enable Oracle ILOM legacy targets.

   See Enable Oracle ILOM Legacy Targets.

3. Turn on the Locator LED.

   -> set /SYS/LOCATE value=Fast_Blink

   The white Locator LEDs (one on the front panel and one on the rear panel) blink.

4. After locating the server with the blinking Locator LED, turn the LED off by pressing the Locator button.

   ---

   Note -  Alternatively, you can turn off the Locator LED by running the Oracle ILOM set /SYS/LOCATE value=off command.

   ---

5. Consider your next step.

   • Service these components:

     • Servicing the Filter

     • Servicing SAS Drives

     • Servicing the DVD Drive

     • Servicing Power Supplies

   • Or, remove power from the server.

     See Removing Power From the Server.

Related Information

• Server Administration, set command

• Component Service Task Reference

• Removing Power From the Server