Go to main content

Oracle® ILOM Administrator's Guide for Configuration and Maintenance Firmware Release 4.0.x

Exit Print View

Updated: July 2020

Configure Oracle ILOM as an ASR Client

Before You Begin

  • The Admin (a) role is required to configure the ASR Client properties in Oracle ILOM.

  • The ASR Client Endpoint URL property must be set to a registered ASR Manager or ASR Manager Relay.

    Note -  For further details about how to set up and register a system with Oracle ASR Manager, refer to the ASR product documentation at: https://docs.oracle.com/cd/E37710_01/install.41/e18475/ch2_asr_manager.htm#ASRUD128
  • ASR is configurable from Oracle ILOM as either an ASR Client (as described in this topic) or as an SNMP management station (via ASR trap alert notifications). For more information about alternative methods for configuring ASR in Oracle ILOM, see the references listed in the Related Information section of this topic.

  1. Access the ASR configuration properties in Oracle ILOM:
    • Web: Click ILOM Administration > Notification > ASR.

    • CLI: Type: /SP/clients/asr

  2. Configure the ASR properties as described in Figure 85, Table 85, ASR Client Properties.
  3. (Web interface only) Click Save.

Related Information