Oracle^® ILOM Administrator's Guide for Configuration and Maintenance Firmware Release 4.0.x

Special Considerations for Configuring Host Storage Device Properties

• The Oracle ILOM Host Storage Device feature is available only on systems that support the Oracle ILOM Remote System Console Plus.

  ---

  Note -  SPARC M8 series servers, as of firmware release 4.0.1.x, do not support Oracle ILOM Remote System Console Plus. SPARC M8 series servers support Oracle ILOM Remote System VNC Console. For futhrer details, see Connecting to the Oracle ILOM Remote System VNC Console

  ---

• Only one storage image can be redirected at one time from any Oracle ILOM KVMS user interface. For instance, if you attempt to redirect a storage image file when another KVMS storage redirection is in progress, the subsequent storage redirection attempt will fail and an error message will appear.

• The Host Storage Device Miniroot mode is available in Oracle ILOM as firmware release 3.2.5.5 for SPARC M7, T7, and later series servers.

• Prior to Oracle ILOM release 3.2.4, the Host Storage Device feature was known as the Remote Device feature (accessible from the web interface by clicking Remote Control -> Remote Device).

• For SPARC server configurations with multiple hosts (domains), you must precede the SP CLI target shown in the Host Storage Device Properties table below with /Servers/PDomains/PDomain_n. Navigation in the web interface is as follows: Domain# > Remote Control > Host Storage Device.