Oracle^® ILOM Administrator's Guide for Configuration and Maintenance Firmware Release 4.0.x

Log In to the Oracle ILOM SP or CMM

Before You Begin

• An established local or network management connection to Oracle ILOM is required.

  For instructions, see Choosing and Configuring a Management Connection to Oracle ILOM.

• The preconfigured Oracle ILOM root account or a customer-configured user account is required to log in to Oracle ILOM.

  For information about the preconfigured root account, see Preconfigured User Accounts Enabled by Default. For information about how to create user accounts in Oracle ILOM, see Managing User Credentials .

To log in to Oracle ILOM from a local serial management connection or a network management connection, follow these steps:

1. To log in to Oracle ILOM, perform the following steps for the applicable Oracle ILOM interface:

   Oracle ILOM Interface Steps Local serial console (SER MGT port) After creating a connection between the console and Oracle ILOM by pressing Enter, type the Oracle ILOM user name and password when prompted. For example: Type root for user name and changeme for password. Web browser Type http://ILOM_SP_or_CMM_ipaddress into the web browser and press Enter. The Oracle ILOM Login page appears. For guidelines for entering the IP address assigned to Oracle ILOM, see Usage Guidelines for IP Network Management Address. Log in to the Oracle ILOM web interface by specifying a valid Oracle ILOM use r name and password. For example: Type root for user name and changeme for password. The Oracle ILOM Summary page appears. CLI secure shell To establish an SSH session to the Oracle ILOM CLI, open a terminal window. To log in to Oracle ILOM using the default root account, type: $ ssh root@ILOM_SP_or_CMM_ipaddress Oracle ILOM prompts you for the root password. At the Password prompt, type changeme. The Oracle ILOM CLI prompt appears (->). To access a blade server SP from the CMM CLI, refer to the Managing Blade Servers From the CMM CLI in Oracle ILOM User’s Guide for System Monitoring and Diagnostics Firmware Release 4.0.x.

2. To exit Oracle ILOM, perform one of the following:
   • To exit the Oracle ILOM web interface session – Click the Log Out button located in the upper right side of the web interface page.
   • To exit the Oracle ILOM CLI session – Type: exit

Related Information

• Assigning System Identification Information

• Default Timeout for CLI and Web Sessions

• Modifying Default Management Access Configuration Properties

• Management of Banner Messages at Log-In

• Setting Up and Maintaining User Accounts

• Password Recovery for Default root Account

• Setting Up a Management Connection to Oracle ILOM and Logging In

• Using Remote KVMS Consoles for Host Server Redirection

• Viewing System Inventory, Health, and Performing Service and Management Actions in Oracle ILOM User’s Guide for System Monitoring and Diagnostics Firmware Release 4.0.x

• CLI Reference for Mapping Management Tasks to CLI Targets in Oracle ILOM User’s Guide for System Monitoring and Diagnostics Firmware Release 4.0.x

• Updating Oracle ILOM Firmware