Go to main content

Oracle® ILOM Administrator's Guide for Configuration and Maintenance Firmware Release 4.0.x

Exit Print View

Updated: July 2020

Reset Power to Server SP, NEM SP, or CMM

Before You Begin

  • Host Control and Reset (r) role is required to reset a SP or CMM.

  • After clicking the web Reset button or issuing the CLI reset command, Oracle ILOM will automatically display a prompt to confirm the reset operation, unless a CLI -script option is specified (reset [options] target).

This procedure provides both web and CLI instructions.

  • To reset the power to an SP or CMM, perform one of the following:
    Oracle ILOM Interface
    Reset Power to SP or CMM
    Perform one of the following:
    • Server SP:

      Click ILOM Administration > Maintenance > Reset SP, then click the Reset SP button.

    • CMM and blade chassis components:

      Click ILOM Administration > Maintenance >Reset Components.

      Click the radio button adjacent to the chassis component (CMM, blade, NEM), then click the Reset button.

    Perform one of the following:
    • Server SP:

      To reset the server SP, type: reset /SP

    • CMM blade chassis components:

      To reset the CMM, type: reset /CMM

      To reset a blade SP, type: reset /Servers/Blades/BLn/SP

      To reset a NEM SP, type: reset /System/IO_Modules/NEMn/SP