ibportstate
(1m)
名前
ibportstate - handle port (physical) state and link speed of
an InfiniBand port
形式
ibportstate [-d(ebug)] [-e(rr_show)] [-v(erbose)]
[-D(irect)] [-G(uid)] [-s smlid] [-V(ersion)] [-C ca_name]
[-P ca_port] [-t(imeout) timeout_ms] [-h(elp)] <dest
dr_path|lid|guid> <portnum> [<op>]
説明
OpenIB Diagnostics IBPORTSTATE(1m)
NAME
ibportstate - handle port (physical) state and link speed of
an InfiniBand port
SYNOPSIS
ibportstate [-d(ebug)] [-e(rr_show)] [-v(erbose)]
[-D(irect)] [-G(uid)] [-s smlid] [-V(ersion)] [-C ca_name]
[-P ca_port] [-t(imeout) timeout_ms] [-h(elp)] <dest
dr_path|lid|guid> <portnum> [<op>]
DESCRIPTION
ibportstate allows the port state and port physical state of
an IB port to be queried (in addition to link width and
speed being validated relative to the peer port when the
port queried is a switch port), or a switch port to be dis-
abled, enabled, or reset. It also allows the link
speed/width enabled on any IB port to be adjusted.
OPTIONS
op Port operations allowed
supported ops: enable, disable, reset, speed, width,
query, down, arm, active, vls, mtu, lid,
smlid, lmc
Default is query
ops enable, disable, and reset are only allowed on switch
ports
(An error is indicated if attempted on CA or router ports)
speed and width ops are allowed on any port
speed values are legal values for PortInfo:LinkSpeedEnabled
(An error is indicated if PortInfo:LinkSpeedSupported does
not support
this setting)
width values are legal values for PortInfo:LinkWidthEnabled
(An error is indicated if PortInfo:LinkWidthSupported does
not support
this setting)
(NOTE: Speed and width changes are not effected until the
port goes through
link renegotiation)
query also validates port characteristics (link width and
speed)
based on the peer port. This checking is done when the
port
queried is a switch port as it relies on combined routing
(an initial LID route with directed routing to the peer)
which
can only be done on a switch. This peer port validation
feature
OpenIB Last change: Jan 13, 2010 1
OpenIB Diagnostics IBPORTSTATE(1m)
of query op requires LID routing to be functioning in the
subnet.
COMMON OPTIONS
Most OpenIB diagnostics take the following common flags. The
exact list of supported flags per utility can be found in
the usage message and can be shown using the util_name -h
syntax.
# Debugging flags
-d raise the IB debugging level.
May be used several times (-ddd or -d -d -d).
-e show send and receive errors (timeouts and others)
-h show the usage message
-v increase the application verbosity level.
May be used several times (-vv or -v -v -v)
-V show the version info.
# Addressing flags
-D use directed path address arguments. The path
is a comma separated list of out ports.
Examples:
"0" # self port
"0,1,2,1,4" # out via port 1, then 2, ...
-G use GUID address argument. In most cases, it is the
Port GUID.
Example:
"0x08f1040023"
-s <smlid> use 'smlid' as the target lid for SM/SA
queries.
# Other common flags:
-C <ca_name> use the specified ca_name.
-P <ca_port> use the specified ca_port.
-t <timeout_ms> override the default timeout for the
solicited mads.
Multiple CA/Multiple Port Support
OpenIB Last change: Jan 13, 2010 2
OpenIB Diagnostics IBPORTSTATE(1m)
When no IB device or port is specified, the port to use is
selected by the following criteria:
1. the first port that is ACTIVE.
2. if not found, the first port that is UP (physical link
up).
If a port and/or CA name is specified, the user request is
attempted to be fulfilled, and will fail if it is not possi-
ble.
EXAMPLES
ibportstate 3 1 disable # by lid
ibportstate -G 0x2C9000100D051 1 enable # by guid
ibportstate -D 0 1 # (query) by direct
route
ibportstate 3 1 reset # by lid
ibportstate 3 1 speed 1 # by lid
ibportstate 3 1 width 1 # by lid
ibportstate -D 0 1 lid 0x1234 arm # by direct route
AUTHOR
Hal Rosenstock
<hal.rosenstock@gmail.com>
ATTRIBUTES
See attributes(5) for descriptions of the following
attributes:
+---------------+----------------------+
|ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+---------------+----------------------+
|Availability | network/open-fabrics |
+---------------+----------------------+
|Stability | Volatile |
+---------------+----------------------+
NOTES
This software was built from source available at
https://java.net/projects/solaris-userland. The original
community source was downloaded from ['http://www.openfab-
rics.org/downloads/ibutils/ibutils-1.5.7.tar.gz',
OpenIB Last change: Jan 13, 2010 3
OpenIB Diagnostics IBPORTSTATE(1m)
'http://www.openfabrics.org/downloads/libibverbs/libib-
verbs-1.1.4-1.22.g7257cd3.tar.gz', 'http://www.openfab-
rics.org/down-
loads/libmlx4/libmlx4-1.0.1-1.18.gb810a27.tar.gz',
'http://www.openfabrics.org/downloads/libsdp/lib-
sdp-1.1.108-0.15.gd7fdb72.tar.gz', 'http://www.openfab-
rics.org/downloads/management/infiniband-
diags-1.5.8.tar.gz', 'http://www.openfabrics.org/down-
loads/management/libibmad-1.3.7.tar.gz', 'http://www.open-
fabrics.org/downloads/management/libibumad-1.3.7.tar.gz',
'http://www.openfabrics.org/downloads/manage-
ment/opensm-3.3.9.tar.gz', 'http://www.openfabrics.org/down-
loads/perftest/perftest-1.3.0-0.42.gf350d3d.tar.gz',
'http://www.openfabrics.org/down-
loads/qperf/qperf-0.4.6-0.1.gb81434e.tar.gz',
'http://www.openfabrics.org/downloads/rdmacm/librd-
macm-1.0.14.1.tar.gz', 'http://www.openfabrics.org/down-
loads/rds-tools/rds-tools-2.0.4.tar.gz']
Further information about this software can be found on the
open source community website at http://www.openfab-
rics.org/.
OpenIB Last change: Jan 13, 2010 4