git-config
(1)
名前
git-config - Get and set repository or global options
形式
git config [<file-option>] [type] [-z|--null] name [value [value_regex]]
git config [<file-option>] [type] --add name value
git config [<file-option>] [type] --replace-all name value [value_regex]
git config [<file-option>] [type] [-z|--null] --get name [value_regex]
git config [<file-option>] [type] [-z|--null] --get-all name [value_regex]
git config [<file-option>] [type] [-z|--null] --get-regexp name_regex [value_regex]
git config [<file-option>] --unset name [value_regex]
git config [<file-option>] --unset-all name [value_regex]
git config [<file-option>] --rename-section old_name new_name
git config [<file-option>] --remove-section name
git config [<file-option>] [-z|--null] -l | --list
git config [<file-option>] --get-color name [default]
git config [<file-option>] --get-colorbool name [stdout-is-tty]
git config [<file-option>] -e | --edit
説明
Git Manual GIT-CONFIG(1)
NAME
git-config - Get and set repository or global options
SYNOPSIS
git config [<file-option>] [type] [-z|--null] name [value [value_regex]]
git config [<file-option>] [type] --add name value
git config [<file-option>] [type] --replace-all name value [value_regex]
git config [<file-option>] [type] [-z|--null] --get name [value_regex]
git config [<file-option>] [type] [-z|--null] --get-all name [value_regex]
git config [<file-option>] [type] [-z|--null] --get-regexp name_regex [value_regex]
git config [<file-option>] --unset name [value_regex]
git config [<file-option>] --unset-all name [value_regex]
git config [<file-option>] --rename-section old_name new_name
git config [<file-option>] --remove-section name
git config [<file-option>] [-z|--null] -l | --list
git config [<file-option>] --get-color name [default]
git config [<file-option>] --get-colorbool name [stdout-is-tty]
git config [<file-option>] -e | --edit
DESCRIPTION
You can query/set/replace/unset options with this command.
The name is actually the section and the key separated by a
dot, and the value will be escaped.
Multiple lines can be added to an option by using the --add
option. If you want to update or unset an option which can
occur on multiple lines, a POSIX regexp value_regex needs to
be given. Only the existing values that match the regexp are
updated or unset. If you want to handle the lines that do
not match the regex, just prepend a single exclamation mark
in front (see also the section called "EXAMPLES").
The type specifier can be either --int or --bool, to make
git config ensure that the variable(s) are of the given type
and convert the value to the canonical form (simple decimal
number for int, a "true" or "false" string for bool), or
--path, which does some path expansion (see --path below).
If no type specifier is passed, no checks or transformations
are performed on the value.
The file-option can be one of --system, --global or --file
which specify where the values will be read from or written
to. The default is to assume the config file of the current
repository, .git/config unless defined otherwise with
GIT_DIR and GIT_CONFIG (see the section called "FILES").
This command will fail (with exit code ret) if:
1. The config file is invalid (ret=3),
2. can not write to the config file (ret=4),
Git 1.7.9.2 Last change: 02/22/2012 1
Git Manual GIT-CONFIG(1)
3. no section or name was provided (ret=2),
4. the section or key is invalid (ret=1),
5. you try to unset an option which does not exist (ret=5),
6. you try to unset/set an option for which multiple lines
match (ret=5),
7. you try to use an invalid regexp (ret=6), or
8. you use --global option without $HOME being properly set
(ret=128).
On success, the command returns the exit code 0.
OPTIONS
--replace-all
Default behavior is to replace at most one line. This
replaces all lines matching the key (and optionally the
value_regex).
--add
Adds a new line to the option without altering any
existing values. This is the same as providing ^$ as the
value_regex in --replace-all.
--get
Get the value for a given key (optionally filtered by a
regex matching the value). Returns error code 1 if the
key was not found and error code 2 if multiple key
values were found.
--get-all
Like get, but does not fail if the number of values for
the key is not exactly one.
--get-regexp
Like --get-all, but interprets the name as a regular
expression. Also outputs the key names.
--global
For writing options: write to global ~/.gitconfig file
rather than the repository .git/config.
For reading options: read only from global ~/.gitconfig
rather than from all available files.
See also the section called "FILES".
--system
For writing options: write to system-wide
Git 1.7.9.2 Last change: 02/22/2012 2
Git Manual GIT-CONFIG(1)
$(prefix)/etc/gitconfig rather than the repository
.git/config.
For reading options: read only from system-wide
$(prefix)/etc/gitconfig rather than from all available
files.
See also the section called "FILES".
-f config-file, --file config-file
Use the given config file instead of the one specified
by GIT_CONFIG.
--remove-section
Remove the given section from the configuration file.
--rename-section
Rename the given section to a new name.
--unset
Remove the line matching the key from config file.
--unset-all
Remove all lines matching the key from config file.
-l, --list
List all variables set in config file.
--bool
git config will ensure that the output is "true" or
"false"
--int
git config will ensure that the output is a simple
decimal number. An optional value suffix of k, m, or g
in the config file will cause the value to be multiplied
by 1024, 1048576, or 1073741824 prior to output.
--bool-or-int
git config will ensure that the output matches the
format of either --bool or --int, as described above.
--path
git-config will expand leading ~ to the value of $HOME,
and ~user to the home directory for the specified user.
This option has no effect when setting the value (but
you can use git config bla ~/ from the command line to
let your shell do the expansion).
Git 1.7.9.2 Last change: 02/22/2012 3
Git Manual GIT-CONFIG(1)
-z, --null
For all options that output values and/or keys, always
end values with the null character (instead of a
newline). Use newline instead as a delimiter between key
and value. This allows for secure parsing of the output
without getting confused e.g. by values that contain
line breaks.
--get-colorbool name [stdout-is-tty]
Find the color setting for name (e.g. color.diff) and
output "true" or "false". stdout-is-tty should be
either "true" or "false", and is taken into account when
configuration says "auto". If stdout-is-tty is missing,
then checks the standard output of the command itself,
and exits with status 0 if color is to be used, or exits
with status 1 otherwise. When the color setting for name
is undefined, the command uses color.ui as fallback.
--get-color name [default]
Find the color configured for name (e.g.
color.diff.new) and output it as the ANSI color escape
sequence to the standard output. The optional default
parameter is used instead, if there is no color
configured for name.
-e, --edit
Opens an editor to modify the specified config file;
either --system, --global, or repository (default).
FILES
If not set explicitly with --file, there are three files
where git config will search for configuration options:
$GIT_DIR/config
Repository specific configuration file. (The filename is
of course relative to the repository root, not the
working directory.)
~/.gitconfig
User-specific configuration file. Also called "global"
configuration file.
$(prefix)/etc/gitconfig
System-wide configuration file.
If no further options are given, all reading options will
read all of these files that are available. If the global or
the system-wide configuration file are not available they
will be ignored. If the repository configuration file is not
available or readable, git config will exit with a non-zero
error code. However, in neither case will an error message
be issued.
Git 1.7.9.2 Last change: 02/22/2012 4
Git Manual GIT-CONFIG(1)
All writing options will per default write to the repository
specific configuration file. Note that this also affects
options like --replace-all and --unset. git config will only
ever change one file at a time.
You can override these rules either by command line options
or by environment variables. The --global and the --system
options will limit the file used to the global or
system-wide file respectively. The GIT_CONFIG environment
variable has a similar effect, but you can specify any
filename you want.
ENVIRONMENT
GIT_CONFIG
Take the configuration from the given file instead of
.git/config. Using the "--global" option forces this to
~/.gitconfig. Using the "--system" option forces this to
$(prefix)/etc/gitconfig.
See also the section called "FILES".
EXAMPLES
Given a .git/config like this:
#
# This is the config file, and
# a '#' or ';' character indicates
# a comment
#
; core variables
[core]
; Don't trust file modes
filemode = false
; Our diff algorithm
[diff]
external = /usr/local/bin/diff-wrapper
renames = true
; Proxy settings
[core]
gitproxy="proxy-command" for kernel.org
gitproxy=default-proxy ; for all the rest
you can set the filemode to true with
% git config core.filemode true
The hypothetical proxy command entries actually have a
postfix to discern what URL they apply to. Here is how to
Git 1.7.9.2 Last change: 02/22/2012 5
Git Manual GIT-CONFIG(1)
change the entry for kernel.org to "ssh".
% git config core.gitproxy '"ssh" for kernel.org' 'for kernel.org$'
This makes sure that only the key/value pair for kernel.org
is replaced.
To delete the entry for renames, do
% git config --unset diff.renames
If you want to delete an entry for a multivar (like
core.gitproxy above), you have to provide a regex matching
the value of exactly one line.
To query the value for a given key, do
% git config --get core.filemode
or
% git config core.filemode
or, to query a multivar:
% git config --get core.gitproxy "for kernel.org$"
If you want to know all the values for a multivar, do:
% git config --get-all core.gitproxy
If you like to live dangerously, you can replace all
core.gitproxy by a new one with
% git config --replace-all core.gitproxy ssh
However, if you really only want to replace the line for the
default proxy, i.e. the one without a "for ..." postfix, do
something like this:
% git config core.gitproxy ssh '! for '
To actually match only values with an exclamation mark, you
have to
Git 1.7.9.2 Last change: 02/22/2012 6
Git Manual GIT-CONFIG(1)
% git config section.key value '[!]'
To add a new proxy, without altering any of the existing
ones, use
% git config core.gitproxy '"proxy-command" for example.com'
An example to use customized color from the configuration in
your script:
#!/bin/sh
WS=$(git config --get-color color.diff.whitespace "blue reverse")
RESET=$(git config --get-color "" "reset")
echo "${WS}your whitespace color or blue reverse${RESET}"
CONFIGURATION FILE
The git configuration file contains a number of variables
that affect the git command's behavior. The .git/config file
in each repository is used to store the configuration for
that repository, and $HOME/.gitconfig is used to store a
per-user configuration as fallback values for the
.git/config file. The file /etc/gitconfig can be used to
store a system-wide default configuration.
The configuration variables are used by both the git
plumbing and the porcelains. The variables are divided into
sections, wherein the fully qualified variable name of the
variable itself is the last dot-separated segment and the
section name is everything before the last dot. The variable
names are case-insensitive and only alphanumeric characters
are allowed. Some variables may appear multiple times.
Syntax
The syntax is fairly flexible and permissive; whitespaces
are mostly ignored. The # and ; characters begin comments to
the end of line, blank lines are ignored.
The file consists of sections and variables. A section
begins with the name of the section in square brackets and
continues until the next section begins. Section names are
not case sensitive. Only alphanumeric characters, - and .
are allowed in section names. Each variable must belong to
some section, which means that there must be a section
header before the first setting of a variable.
Sections can be further divided into subsections. To begin a
subsection put its name in double quotes, separated by space
from the section name, in the section header, like in the
example below:
Git 1.7.9.2 Last change: 02/22/2012 7
Git Manual GIT-CONFIG(1)
[section "subsection"]
Subsection names are case sensitive and can contain any
characters except newline (doublequote " and backslash have
to be escaped as \" and \\, respectively). Section headers
cannot span multiple lines. Variables may belong directly to
a section or to a given subsection. You can have [section]
if you have [section "subsection"], but you don't need to.
There is also a deprecated [section.subsection] syntax. With
this syntax, the subsection name is converted to lower-case
and is also compared case sensitively. These subsection
names follow the same restrictions as section names.
All the other lines (and the remainder of the line after the
section header) are recognized as setting variables, in the
form name = value. If there is no equal sign on the line,
the entire line is taken as name and the variable is
recognized as boolean "true". The variable names are
case-insensitive and only alphanumeric characters and - are
allowed. There can be more than one value for a given
variable; we say then that variable is multivalued.
Leading and trailing whitespace in a variable value is
discarded. Internal whitespace within a variable value is
retained verbatim.
The values following the equals sign in variable assign are
all either a string, an integer, or a boolean. Boolean
values may be given as yes/no, 1/0, true/false or on/off.
Case is not significant in boolean values, when converting
value to the canonical form using --bool type specifier; git
config will ensure that the output is "true" or "false".
String values may be entirely or partially enclosed in
double quotes. You need to enclose variable values in double
quotes if you want to preserve leading or trailing
whitespace, or if the variable value contains comment
characters (i.e. it contains # or ;). Double quote " and
backslash \ characters in variable values must be escaped:
use \" for " and \\ for \.
The following escape sequences (beside \" and \\) are
recognized: \n for newline character (NL), \t for horizontal
tabulation (HT, TAB) and \b for backspace (BS). No other
char escape sequence, nor octal char sequences are valid.
Variable values ending in a \ are continued on the next line
in the customary UNIX fashion.
Some variables may require a special value format.
Git 1.7.9.2 Last change: 02/22/2012 8
Git Manual GIT-CONFIG(1)
Example
# Core variables
[core]
; Don't trust file modes
filemode = false
# Our diff algorithm
[diff]
external = /usr/local/bin/diff-wrapper
renames = true
[branch "devel"]
remote = origin
merge = refs/heads/devel
# Proxy settings
[core]
gitProxy="ssh" for "kernel.org"
gitProxy=default-proxy ; for the rest
Variables
Note that this list is non-comprehensive and not necessarily
complete. For command-specific variables, you will find a
more detailed description in the appropriate manual page.
You will find a description of non-core porcelain
configuration variables in the respective porcelain
documentation.
advice.*
These variables control various optional help messages
designed to aid new users. All advice.* variables
default to true, and you can tell Git that you do not
need help by setting these to false:
pushNonFastForward
Advice shown when git-push(1) refuses
non-fast-forward refs.
statusHints
Directions on how to stage/unstage/add shown in the
output of git-status(1) and the template shown when
writing commit messages.
commitBeforeMerge
Advice shown when git-merge(1) refuses to merge to
avoid overwriting local changes.
resolveConflict
Advices shown by various commands when conflicts
prevent the operation from being performed.
Git 1.7.9.2 Last change: 02/22/2012 9
Git Manual GIT-CONFIG(1)
implicitIdentity
Advice on how to set your identity configuration
when your information is guessed from the system
username and domain name.
detachedHead
Advice shown when you used git-checkout(1) to move
to the detach HEAD state, to instruct how to create
a local branch after the fact.
core.fileMode
If false, the executable bit differences between the
index and the working tree are ignored; useful on broken
filesystems like FAT. See git-update-index(1).
The default is true, except git-clone(1) or git-init(1)
will probe and set core.fileMode false if appropriate
when the repository is created.
core.ignoreCygwinFSTricks
This option is only used by Cygwin implementation of
Git. If false, the Cygwin stat() and lstat() functions
are used. This may be useful if your repository consists
of a few separate directories joined in one hierarchy
using Cygwin mount. If true, Git uses native Win32 API
whenever it is possible and falls back to Cygwin
functions only to handle symbol links. The native mode
is more than twice faster than normal Cygwin l/stat()
functions. True by default, unless core.filemode is
true, in which case ignoreCygwinFSTricks is ignored as
Cygwin's POSIX emulation is required to support
core.filemode.
core.ignorecase
If true, this option enables various workarounds to
enable git to work better on filesystems that are not
case sensitive, like FAT. For example, if a directory
listing finds "makefile" when git expects "Makefile",
git will assume it is really the same file, and continue
to remember it as "Makefile".
The default is false, except git-clone(1) or git-init(1)
will probe and set core.ignorecase true if appropriate
when the repository is created.
core.trustctime
If false, the ctime differences between the index and
the working tree are ignored; useful when the inode
change time is regularly modified by something outside
Git (file system crawlers and some backup systems). See
git-update-index(1). True by default.
Git 1.7.9.2 Last change: 02/22/2012 10
Git Manual GIT-CONFIG(1)
core.quotepath
The commands that output paths (e.g. ls-files, diff),
when not given the -z option, will quote "unusual"
characters in the pathname by enclosing the pathname in
a double-quote pair and with backslashes the same way
strings in C source code are quoted. If this variable is
set to false, the bytes higher than 0x80 are not quoted
but output as verbatim. Note that double quote,
backslash and control characters are always quoted
without -z regardless of the setting of this variable.
core.eol
Sets the line ending type to use in the working
directory for files that have the text property set.
Alternatives are lf, crlf and native, which uses the
platform's native line ending. The default value is
native. See gitattributes(4) for more information on
end-of-line conversion.
core.safecrlf
If true, makes git check if converting CRLF is
reversible when end-of-line conversion is active. Git
will verify if a command modifies a file in the work
tree either directly or indirectly. For example,
committing a file followed by checking out the same file
should yield the original file in the work tree. If this
is not the case for the current setting of
core.autocrlf, git will reject the file. The variable
can be set to "warn", in which case git will only warn
about an irreversible conversion but continue the
operation.
CRLF conversion bears a slight chance of corrupting
data. When it is enabled, git will convert CRLF to LF
during commit and LF to CRLF during checkout. A file
that contains a mixture of LF and CRLF before the commit
cannot be recreated by git. For text files this is the
right thing to do: it corrects line endings such that we
have only LF line endings in the repository. But for
binary files that are accidentally classified as text
the conversion can corrupt data.
If you recognize such corruption early you can easily
fix it by setting the conversion type explicitly in
.gitattributes. Right after committing you still have
the original file in your work tree and this file is not
yet corrupted. You can explicitly tell git that this
file is binary and git will handle the file
appropriately.
Unfortunately, the desired effect of cleaning up text
files with mixed line endings and the undesired effect
Git 1.7.9.2 Last change: 02/22/2012 11
Git Manual GIT-CONFIG(1)
of corrupting binary files cannot be distinguished. In
both cases CRLFs are removed in an irreversible way. For
text files this is the right thing to do because CRLFs
are line endings, while for binary files converting
CRLFs corrupts data.
Note, this safety check does not mean that a checkout
will generate a file identical to the original file for
a different setting of core.eol and core.autocrlf, but
only for the current one. For example, a text file with
LF would be accepted with core.eol=lf and could later be
checked out with core.eol=crlf, in which case the
resulting file would contain CRLF, although the original
file contained LF. However, in both work trees the line
endings would be consistent, that is either all LF or
all CRLF, but never mixed. A file with mixed line
endings would be reported by the core.safecrlf
mechanism.
core.autocrlf
Setting this variable to "true" is almost the same as
setting the text attribute to "auto" on all files except
that text files are not guaranteed to be normalized:
files that contain CRLF in the repository will not be
touched. Use this setting if you want to have CRLF line
endings in your working directory even though the
repository does not have normalized line endings. This
variable can be set to input, in which case no output
conversion is performed.
core.symlinks
If false, symbolic links are checked out as small plain
files that contain the link text. git-update-index(1)
and git-add(1) will not change the recorded type to
regular file. Useful on filesystems like FAT that do not
support symbolic links.
The default is true, except git-clone(1) or git-init(1)
will probe and set core.symlinks false if appropriate
when the repository is created.
core.gitProxy
A "proxy command" to execute (as command host port)
instead of establishing direct connection to the remote
server when using the git protocol for fetching. If the
variable value is in the "COMMAND for DOMAIN" format,
the command is applied only on hostnames ending with the
specified domain string. This variable may be set
multiple times and is matched in the given order; the
first match wins.
Can be overridden by the GIT_PROXY_COMMAND environment
Git 1.7.9.2 Last change: 02/22/2012 12
Git Manual GIT-CONFIG(1)
variable (which always applies universally, without the
special "for" handling).
The special string none can be used as the proxy command
to specify that no proxy be used for a given domain
pattern. This is useful for excluding servers inside a
firewall from proxy use, while defaulting to a common
proxy for external domains.
core.ignoreStat
If true, commands which modify both the working tree and
the index will mark the updated paths with the "assume
unchanged" bit in the index. These marked files are then
assumed to stay unchanged in the working tree, until you
mark them otherwise manually - Git will not detect the
file changes by lstat() calls. This is useful on systems
where those are very slow, such as Microsoft Windows.
See git-update-index(1). False by default.
core.preferSymlinkRefs
Instead of the default "symref" format for HEAD and
other symbolic reference files, use symbolic links. This
is sometimes needed to work with old scripts that expect
HEAD to be a symbolic link.
core.bare
If true this repository is assumed to be bare and has no
working directory associated with it. If this is the
case a number of commands that require a working
directory will be disabled, such as git-add(1) or git-
merge(1).
This setting is automatically guessed by git-clone(1) or
git-init(1) when the repository was created. By default
a repository that ends in "/.git" is assumed to be not
bare (bare = false), while all other repositories are
assumed to be bare (bare = true).
core.worktree
Set the path to the root of the working tree. This can
be overridden by the GIT_WORK_TREE environment variable
and the --work-tree command line option. The value can
be an absolute path or relative to the path to the .git
directory, which is either specified by --git-dir or
GIT_DIR, or automatically discovered. If --git-dir or
GIT_DIR is specified but none of --work-tree,
GIT_WORK_TREE and core.worktree is specified, the
current working directory is regarded as the top level
of your working tree.
Note that this variable is honored even when set in a
configuration file in a ".git" subdirectory of a
Git 1.7.9.2 Last change: 02/22/2012 13
Git Manual GIT-CONFIG(1)
directory and its value differs from the latter
directory (e.g. "/path/to/.git/config" has core.worktree
set to "/different/path"), which is most likely a
misconfiguration. Running git commands in the "/path/to"
directory will still use "/different/path" as the root
of the work tree and can cause confusion unless you know
what you are doing (e.g. you are creating a read-only
snapshot of the same index to a location different from
the repository's usual working tree).
core.logAllRefUpdates
Enable the reflog. Updates to a ref <ref> is logged to
the file "$GIT_DIR/logs/<ref>", by appending the new and
old SHA1, the date/time and the reason of the update,
but only when the file exists. If this configuration
variable is set to true, missing "$GIT_DIR/logs/<ref>"
file is automatically created for branch heads (i.e.
under refs/heads/), remote refs (i.e. under
refs/remotes/), note refs (i.e. under refs/notes/), and
the symbolic ref HEAD.
This information can be used to determine what commit
was the tip of a branch "2 days ago".
This value is true by default in a repository that has a
working directory associated with it, and false by
default in a bare repository.
core.repositoryFormatVersion
Internal variable identifying the repository format and
layout version.
core.sharedRepository
When group (or true), the repository is made shareable
between several users in a group (making sure all the
files and objects are group-writable). When all (or
world or everybody), the repository will be readable by
all users, additionally to being group-shareable. When
umask (or false), git will use permissions reported by
umask(2). When 0xxx, where 0xxx is an octal number,
files in the repository will have this mode value. 0xxx
will override user's umask value (whereas the other
options will only override requested parts of the user's
umask value). Examples: 0660 will make the repo
read/write-able for the owner and group, but
inaccessible to others (equivalent to group unless umask
is e.g. 0022). 0640 is a repository that is
group-readable but not group-writable. See git-init(1).
False by default.
core.warnAmbiguousRefs
If true, git will warn you if the ref name you passed it
Git 1.7.9.2 Last change: 02/22/2012 14
Git Manual GIT-CONFIG(1)
is ambiguous and might match multiple refs in the
.git/refs/ tree. True by default.
core.compression
An integer -1..9, indicating a default compression
level. -1 is the zlib default. 0 means no compression,
and 1..9 are various speed/size tradeoffs, 9 being
slowest. If set, this provides a default to other
compression variables, such as core.loosecompression and
pack.compression.
core.loosecompression
An integer -1..9, indicating the compression level for
objects that are not in a pack file. -1 is the zlib
default. 0 means no compression, and 1..9 are various
speed/size tradeoffs, 9 being slowest. If not set,
defaults to core.compression. If that is not set,
defaults to 1 (best speed).
core.packedGitWindowSize
Number of bytes of a pack file to map into memory in a
single mapping operation. Larger window sizes may allow
your system to process a smaller number of large pack
files more quickly. Smaller window sizes will negatively
affect performance due to increased calls to the
operating system's memory manager, but may improve
performance when accessing a large number of large pack
files.
Default is 1 MiB if NO_MMAP was set at compile time,
otherwise 32 MiB on 32 bit platforms and 1 GiB on 64 bit
platforms. This should be reasonable for all
users/operating systems. You probably do not need to
adjust this value.
Common unit suffixes of k, m, or g are supported.
core.packedGitLimit
Maximum number of bytes to map simultaneously into
memory from pack files. If Git needs to access more than
this many bytes at once to complete an operation it will
unmap existing regions to reclaim virtual address space
within the process.
Default is 256 MiB on 32 bit platforms and 8 GiB on 64
bit platforms. This should be reasonable for all
users/operating systems, except on the largest projects.
You probably do not need to adjust this value.
Common unit suffixes of k, m, or g are supported.
Git 1.7.9.2 Last change: 02/22/2012 15
Git Manual GIT-CONFIG(1)
core.deltaBaseCacheLimit
Maximum number of bytes to reserve for caching base
objects that may be referenced by multiple deltified
objects. By storing the entire decompressed base objects
in a cache Git is able to avoid unpacking and
decompressing frequently used base objects multiple
times.
Default is 16 MiB on all platforms. This should be
reasonable for all users/operating systems, except on
the largest projects. You probably do not need to adjust
this value.
Common unit suffixes of k, m, or g are supported.
core.bigFileThreshold
Files larger than this size are stored deflated, without
attempting delta compression. Storing large files
without delta compression avoids excessive memory usage,
at the slight expense of increased disk usage.
Default is 512 MiB on all platforms. This should be
reasonable for most projects as source code and other
text files can still be delta compressed, but larger
binary media files won't be.
Common unit suffixes of k, m, or g are supported.
core.excludesfile
In addition to .gitignore (per-directory) and
.git/info/exclude, git looks into this file for patterns
of files which are not meant to be tracked. "~/" is
expanded to the value of $HOME and "~user/" to the
specified user's home directory. See gitignore(4).
core.askpass
Some commands (e.g. svn and http interfaces) that
interactively ask for a password can be told to use an
external program given via the value of this variable.
Can be overridden by the GIT_ASKPASS environment
variable. If not set, fall back to the value of the
SSH_ASKPASS environment variable or, failing that, a
simple password prompt. The external program shall be
given a suitable prompt as command line argument and
write the password on its STDOUT.
core.attributesfile
In addition to .gitattributes (per-directory) and
.git/info/attributes, git looks into this file for
attributes (see gitattributes(4)). Path expansions are
made the same way as for core.excludesfile.
Git 1.7.9.2 Last change: 02/22/2012 16
Git Manual GIT-CONFIG(1)
core.editor
Commands such as commit and tag that lets you edit
messages by launching an editor uses the value of this
variable when it is set, and the environment variable
GIT_EDITOR is not set. See git-var(1).
sequence.editor
Text editor used by git rebase -i for editing the rebase
insn file. The value is meant to be interpreted by the
shell when it is used. It can be overridden by the
GIT_SEQUENCE_EDITOR environment variable. When not
configured the default commit message editor is used
instead.
core.pager
The command that git will use to paginate output. Can be
overridden with the GIT_PAGER environment variable. Note
that git sets the LESS environment variable to FRSX if
it is unset when it runs the pager. One can change these
settings by setting the LESS variable to some other
value. Alternately, these settings can be overridden on
a project or global basis by setting the core.pager
option. Setting core.pager has no affect on the LESS
environment variable behaviour above, so if you want to
override git's default settings this way, you need to be
explicit. For example, to disable the S option in a
backward compatible manner, set core.pager to less
-+$LESS -FRX. This will be passed to the shell by git,
which will translate the final command to LESS=FRSX less
-+FRSX -FRX.
core.whitespace
A comma separated list of common whitespace problems to
notice. git diff will use color.diff.whitespace to
highlight them, and git apply --whitespace=error will
consider them as errors. You can prefix - to disable any
of them (e.g. -trailing-space):
o blank-at-eol treats trailing whitespaces at the end
of the line as an error (enabled by default).
o space-before-tab treats a space character that
appears immediately before a tab character in the
initial indent part of the line as an error (enabled
by default).
o indent-with-non-tab treats a line that is indented
with 8 or more space characters as an error (not
enabled by default).
o tab-in-indent treats a tab character in the initial
indent part of the line as an error (not enabled by
Git 1.7.9.2 Last change: 02/22/2012 17
Git Manual GIT-CONFIG(1)
default).
o blank-at-eof treats blank lines added at the end of
file as an error (enabled by default).
o trailing-space is a short-hand to cover both
blank-at-eol and blank-at-eof.
o cr-at-eol treats a carriage-return at the end of
line as part of the line terminator, i.e. with it,
trailing-space does not trigger if the character
before such a carriage-return is not a whitespace
(not enabled by default).
o tabwidth=<n> tells how many character positions a
tab occupies; this is relevant for
indent-with-non-tab and when git fixes tab-in-indent
errors. The default tab width is 8. Allowed values
are 1 to 63.
core.fsyncobjectfiles
This boolean will enable fsync() when writing object
files.
This is a total waste of time and effort on a filesystem
that orders data writes properly, but can be useful for
filesystems that do not use journalling (traditional
UNIX filesystems) or that only journal metadata and not
file contents (OS X's HFS+, or Linux ext3 with
"data=writeback").
core.preloadindex
Enable parallel index preload for operations like git
diff
This can speed up operations like git diff and git
status especially on filesystems like NFS that have weak
caching semantics and thus relatively high IO latencies.
With this set to true, git will do the index comparison
to the filesystem data in parallel, allowing overlapping
IO's.
core.createObject
You can set this to link, in which case a hardlink
followed by a delete of the source are used to make sure
that object creation will not overwrite existing
objects.
On some file system/operating system combinations, this
is unreliable. Set this config setting to rename there;
However, This will remove the check that makes sure that
existing object files will not get overwritten.
Git 1.7.9.2 Last change: 02/22/2012 18
Git Manual GIT-CONFIG(1)
core.notesRef
When showing commit messages, also show notes which are
stored in the given ref. The ref must be fully
qualified. If the given ref does not exist, it is not an
error but means that no notes should be printed.
This setting defaults to "refs/notes/commits", and it
can be overridden by the GIT_NOTES_REF environment
variable. See git-notes(1).
core.sparseCheckout
Enable "sparse checkout" feature. See section "Sparse
checkout" in git-read-tree(1) for more information.
core.abbrev
Set the length object names are abbreviated to. If
unspecified, many commands abbreviate to 7 hexdigits,
which may not be enough for abbreviated object names to
stay unique for sufficiently long time.
add.ignore-errors, add.ignoreErrors
Tells git add to continue adding files when some files
cannot be added due to indexing errors. Equivalent to
the --ignore-errors option of git-add(1). Older versions
of git accept only add.ignore-errors, which does not
follow the usual naming convention for configuration
variables. Newer versions of git honor add.ignoreErrors
as well.
alias.*
Command aliases for the git(1) command wrapper - e.g.
after defining "alias.last = cat-file commit HEAD", the
invocation "git last" is equivalent to "git cat-file
commit HEAD". To avoid confusion and troubles with
script usage, aliases that hide existing git commands
are ignored. Arguments are split by spaces, the usual
shell quoting and escaping is supported. quote pair and
a backslash can be used to quote them.
If the alias expansion is prefixed with an exclamation
point, it will be treated as a shell command. For
example, defining "alias.new = !gitk --all --not
ORIG_HEAD", the invocation "git new" is equivalent to
running the shell command "gitk --all --not ORIG_HEAD".
Note that shell commands will be executed from the
top-level directory of a repository, which may not
necessarily be the current directory. GIT_PREFIX is set
as returned by running git rev-parse --show-prefix from
the original current directory. See git-rev-parse(1).
am.keepcr
If true, git-am will call git-mailsplit for patches in
Git 1.7.9.2 Last change: 02/22/2012 19
Git Manual GIT-CONFIG(1)
mbox format with parameter --keep-cr. In this case
git-mailsplit will not remove \r from lines ending with
\r\n. Can be overridden by giving --no-keep-cr from the
command line. See git-am(1), git-mailsplit(1).
apply.ignorewhitespace
When set to change, tells git apply to ignore changes in
whitespace, in the same way as the --ignore-space-change
option. When set to one of: no, none, never, false tells
git apply to respect all whitespace differences. See
git-apply(1).
apply.whitespace
Tells git apply how to handle whitespaces, in the same
way as the --whitespace option. See git-apply(1).
branch.autosetupmerge
Tells git branch and git checkout to set up new branches
so that git-pull(1) will appropriately merge from the
starting point branch. Note that even if this option is
not set, this behavior can be chosen per-branch using
the --track and --no-track options. The valid settings
are: false -- no automatic setup is done; true --
automatic setup is done when the starting point is a
remote-tracking branch; always -- automatic setup is
done when the starting point is either a local branch or
remote-tracking branch. This option defaults to true.
branch.autosetuprebase
When a new branch is created with git branch or git
checkout that tracks another branch, this variable tells
git to set up pull to rebase instead of merge (see
"branch.<name>.rebase"). When never, rebase is never
automatically set to true. When local, rebase is set to
true for tracked branches of other local branches. When
remote, rebase is set to true for tracked branches of
remote-tracking branches. When always, rebase will be
set to true for all tracking branches. See
"branch.autosetupmerge" for details on how to set up a
branch to track another branch. This option defaults to
never.
branch.<name>.remote
When in branch <name>, it tells git fetch and git push
which remote to fetch from/push to. It defaults to
origin if no remote is configured. origin is also used
if you are not on any branch.
branch.<name>.merge
Defines, together with branch.<name>.remote, the
upstream branch for the given branch. It tells git
fetch/git pull/git rebase which branch to merge and can
Git 1.7.9.2 Last change: 02/22/2012 20
Git Manual GIT-CONFIG(1)
also affect git push (see push.default). When in branch
<name>, it tells git fetch the default refspec to be
marked for merging in FETCH_HEAD. The value is handled
like the remote part of a refspec, and must match a ref
which is fetched from the remote given by
"branch.<name>.remote". The merge information is used by
git pull (which at first calls git fetch) to lookup the
default branch for merging. Without this option, git
pull defaults to merge the first refspec fetched.
Specify multiple values to get an octopus merge. If you
wish to setup git pull so that it merges into <name>
from another branch in the local repository, you can
point branch.<name>.merge to the desired branch, and use
the special setting . (a period) for
branch.<name>.remote.
branch.<name>.mergeoptions
Sets default options for merging into branch <name>. The
syntax and supported options are the same as those of
git-merge(1), but option values containing whitespace
characters are currently not supported.
branch.<name>.rebase
When true, rebase the branch <name> on top of the
fetched branch, instead of merging the default branch
from the default remote when "git pull" is run. See
"pull.rebase" for doing this in a non branch-specific
manner.
NOTE: this is a possibly dangerous operation; do not use
it unless you understand the implications (see git-
rebase(1) for details).
browser.<tool>.cmd
Specify the command to invoke the specified browser. The
specified command is evaluated in shell with the URLs
passed as arguments. (See git-web--browse(1).)
browser.<tool>.path
Override the path for the given tool that may be used to
browse HTML help (see -w option in git-help(1)) or a
working repository in gitweb (see git-instaweb(1)).
clean.requireForce
A boolean to make git-clean do nothing unless given -f
or -n. Defaults to true.
color.branch
A boolean to enable/disable color in the output of git-
branch(1). May be set to always, false (or never) or
auto (or true), in which case colors are used only when
the output is to a terminal. Defaults to false.
Git 1.7.9.2 Last change: 02/22/2012 21
Git Manual GIT-CONFIG(1)
color.branch.<slot>
Use customized color for branch coloration. <slot> is
one of current (the current branch), local (a local
branch), remote (a remote-tracking branch in
refs/remotes/), plain (other refs).
The value for these configuration variables is a list of
colors (at most two) and attributes (at most one),
separated by spaces. The colors accepted are normal,
black, red, green, yellow, blue, magenta, cyan and
white; the attributes are bold, dim, ul, blink and
reverse. The first color given is the foreground; the
second is the background. The position of the attribute,
if any, doesn't matter.
color.diff
Whether to use ANSI escape sequences to add color to
patches. If this is set to always, git-diff(1), git-
log(1), and git-show(1) will use color for all patches.
If it is set to true or auto, those commands will only
use color when output is to the terminal. Defaults to
false.
This does not affect git-format-patch(1) nor the
git-diff-* plumbing commands. Can be overridden on the
command line with the --color[=<when>] option.
color.diff.<slot>
Use customized color for diff colorization. <slot>
specifies which part of the patch to use the specified
color, and is one of plain (context text), meta
(metainformation), frag (hunk header), func (function in
hunk header), old (removed lines), new (added lines),
commit (commit headers), or whitespace (highlighting
whitespace errors). The values of these variables may be
specified as in color.branch.<slot>.
color.decorate.<slot>
Use customized color for git log --decorate output.
<slot> is one of branch, remoteBranch, tag, stash or
HEAD for local branches, remote-tracking branches, tags,
stash and HEAD, respectively.
color.grep
When set to always, always highlight matches. When false
(or never), never. When set to true or auto, use color
only when the output is written to the terminal.
Defaults to false.
color.grep.<slot>
Use customized color for grep colorization. <slot>
specifies which part of the line to use the specified
Git 1.7.9.2 Last change: 02/22/2012 22
Git Manual GIT-CONFIG(1)
color, and is one of
context
non-matching text in context lines (when using -A,
-B, or -C)
filename
filename prefix (when not using -h)
function
function name lines (when using -p)
linenumber
line number prefix (when using -n)
match
matching text
selected
non-matching text in selected lines
separator
separators between fields on a line (:, -, and =)
and between hunks (--)
The values of these variables may be specified as in
color.branch.<slot>.
color.interactive
When set to always, always use colors for interactive
prompts and displays (such as those used by "git-add
--interactive"). When false (or never), never. When set
to true or auto, use colors only when the output is to
the terminal. Defaults to false.
color.interactive.<slot>
Use customized color for git add --interactive output.
<slot> may be prompt, header, help or error, for four
distinct types of normal output from interactive
commands. The values of these variables may be specified
as in color.branch.<slot>.
color.pager
A boolean to enable/disable colored output when the
pager is in use (default is true).
color.showbranch
A boolean to enable/disable color in the output of git-
show-branch(1). May be set to always, false (or never)
or auto (or true), in which case colors are used only
when the output is to a terminal. Defaults to false.
Git 1.7.9.2 Last change: 02/22/2012 23
Git Manual GIT-CONFIG(1)
color.status
A boolean to enable/disable color in the output of git-
status(1). May be set to always, false (or never) or
auto (or true), in which case colors are used only when
the output is to a terminal. Defaults to false.
color.status.<slot>
Use customized color for status colorization. <slot> is
one of header (the header text of the status message),
added or updated (files which are added but not
committed), changed (files which are changed but not
added in the index), untracked (files which are not
tracked by git), branch (the current branch), or
nobranch (the color the no branch warning is shown in,
defaulting to red). The values of these variables may be
specified as in color.branch.<slot>.
color.ui
This variable determines the default value for variables
such as color.diff and color.grep that control the use
of color per command family. Its scope will expand as
more commands learn configuration to set a default for
the --color option. Set it to always if you want all
output not intended for machine consumption to use
color, to true or auto if you want such output to use
color when written to the terminal, or to false or never
if you prefer git commands not to use color unless
enabled explicitly with some other configuration or the
--color option.
commit.status
A boolean to enable/disable inclusion of status
information in the commit message template when using an
editor to prepare the commit message. Defaults to true.
commit.template
Specify a file to use as the template for new commit
messages. "~/" is expanded to the value of $HOME and
"~user/" to the specified user's home directory.
credential.helper
Specify an external helper to be called when a username
or password credential is needed; the helper may consult
external storage to avoid prompting the user for the
credentials. See gitcredentials(5) for details.
credential.useHttpPath
When acquiring credentials, consider the "path"
component of an http or https URL to be important.
Defaults to false. See gitcredentials(5) for more
information.
Git 1.7.9.2 Last change: 02/22/2012 24
Git Manual GIT-CONFIG(1)
credential.username
If no username is set for a network authentication, use
this username by default. See credential.<context>.*
below, and gitcredentials(5).
credential.<url>.*
Any of the credential.* options above can be applied
selectively to some credentials. For example
"credential.https://example.com.username" would set the
default username only for https connections to
example.com. See gitcredentials(5) for details on how
URLs are matched.
diff.autorefreshindex
When using git diff to compare with work tree files, do
not consider stat-only change as changed. Instead,
silently run git update-index --refresh to update the
cached stat information for paths whose contents in the
work tree match the contents in the index. This option
defaults to true. Note that this affects only git diff
Porcelain, and not lower level diff commands such as git
diff-files.
diff.dirstat
A comma separated list of --dirstat parameters
specifying the default behavior of the --dirstat option
to git-diff(1)` and friends. The defaults can be
overridden on the command line (using
--dirstat=<param1,param2,...>). The fallback defaults
(when not changed by diff.dirstat) are
changes,noncumulative,3. The following parameters are
available:
changes
Compute the dirstat numbers by counting the lines
that have been removed from the source, or added to
the destination. This ignores the amount of pure
code movements within a file. In other words,
rearranging lines in a file is not counted as much
as other changes. This is the default behavior when
no parameter is given.
lines
Compute the dirstat numbers by doing the regular
line-based diff analysis, and summing the
removed/added line counts. (For binary files, count
64-byte chunks instead, since binary files have no
natural concept of lines). This is a more expensive
--dirstat behavior than the changes behavior, but it
does count rearranged lines within a file as much as
other changes. The resulting output is consistent
with what you get from the other --*stat options.
Git 1.7.9.2 Last change: 02/22/2012 25
Git Manual GIT-CONFIG(1)
files
Compute the dirstat numbers by counting the number
of files changed. Each changed file counts equally
in the dirstat analysis. This is the computationally
cheapest --dirstat behavior, since it does not have
to look at the file contents at all.
cumulative
Count changes in a child directory for the parent
directory as well. Note that when using cumulative,
the sum of the percentages reported may exceed 100%.
The default (non-cumulative) behavior can be
specified with the noncumulative parameter.
<limit>
An integer parameter specifies a cut-off percent (3%
by default). Directories contributing less than this
percentage of the changes are not shown in the
output.
Example: The following will count changed files, while
ignoring directories with less than 10% of the total
amount of changed files, and accumulating child
directory counts in the parent directories:
files,10,cumulative.
diff.external
If this config variable is set, diff generation is not
performed using the internal diff machinery, but using
the given command. Can be overridden with the
`GIT_EXTERNAL_DIFF' environment variable. The command is
called with parameters as described under "git Diffs" in
git(1). Note: if you want to use an external diff
program only on a subset of your files, you might want
to use gitattributes(4) instead.
diff.ignoreSubmodules
Sets the default value of --ignore-submodules. Note that
this affects only git diff Porcelain, and not lower
level diff commands such as git diff-files. git
checkout also honors this setting when reporting
uncommitted changes.
diff.mnemonicprefix
If set, git diff uses a prefix pair that is different
from the standard "a/" and "b/" depending on what is
being compared. When this configuration is in effect,
reverse diff output also swaps the order of the
prefixes:
git diff
compares the (i)ndex and the (w)ork tree;
Git 1.7.9.2 Last change: 02/22/2012 26
Git Manual GIT-CONFIG(1)
git diff HEAD
compares a (c)ommit and the (w)ork tree;
git diff --cached
compares a (c)ommit and the (i)ndex;
git diff HEAD:file1 file2
compares an (o)bject and a (w)ork tree entity;
git diff --no-index a b
compares two non-git things (1) and (2).
diff.noprefix
If set, git diff does not show any source or destination
prefix.
diff.renameLimit
The number of files to consider when performing the
copy/rename detection; equivalent to the git diff option
-l.
diff.renames
Tells git to detect renames. If set to any boolean
value, it will enable basic rename detection. If set to
"copies" or "copy", it will detect copies, as well.
diff.suppressBlankEmpty
A boolean to inhibit the standard behavior of printing a
space before each empty output line. Defaults to false.
diff.<driver>.command
The custom diff driver command. See gitattributes(4) for
details.
diff.<driver>.xfuncname
The regular expression that the diff driver should use
to recognize the hunk header. A built-in pattern may
also be used. See gitattributes(4) for details.
diff.<driver>.binary
Set this option to true to make the diff driver treat
files as binary. See gitattributes(4) for details.
diff.<driver>.textconv
The command that the diff driver should call to generate
the text-converted version of a file. The result of the
conversion is used to generate a human-readable diff.
See gitattributes(4) for details.
diff.<driver>.wordregex
The regular expression that the diff driver should use
to split words in a line. See gitattributes(4) for
Git 1.7.9.2 Last change: 02/22/2012 27
Git Manual GIT-CONFIG(1)
details.
diff.<driver>.cachetextconv
Set this option to true to make the diff driver cache
the text conversion outputs. See gitattributes(4) for
details.
diff.tool
The diff tool to be used by git-difftool(1). This option
overrides merge.tool, and has the same valid built-in
values as merge.tool minus "tortoisemerge" and plus
"kompare". Any other value is treated as a custom diff
tool, and there must be a corresponding
difftool.<tool>.cmd option.
difftool.<tool>.path
Override the path for the given tool. This is useful in
case your tool is not in the PATH.
difftool.<tool>.cmd
Specify the command to invoke the specified diff tool.
The specified command is evaluated in shell with the
following variables available: LOCAL is set to the name
of the temporary file containing the contents of the
diff pre-image and REMOTE is set to the name of the
temporary file containing the contents of the diff
post-image.
difftool.prompt
Prompt before each invocation of the diff tool.
diff.wordRegex
A POSIX Extended Regular Expression used to determine
what is a "word" when performing word-by-word difference
calculations. Character sequences that match the regular
expression are "words", all other characters are
ignorable whitespace.
fetch.recurseSubmodules
This option can be either set to a boolean value or to
on-demand. Setting it to a boolean changes the behavior
of fetch and pull to unconditionally recurse into
submodules when set to true or to not recurse at all
when set to false. When set to on-demand (the default
value), fetch and pull will only recurse into a
populated submodule when its superproject retrieves a
commit that updates the submodule's reference.
fetch.fsckObjects
If it is set to true, git-fetch-pack will check all
fetched objects. It will abort in the case of a
malformed object or a broken link. The result of an
Git 1.7.9.2 Last change: 02/22/2012 28
Git Manual GIT-CONFIG(1)
abort are only dangling objects. Defaults to false. If
not set, the value of transfer.fsckObjects is used
instead.
fetch.unpackLimit
If the number of objects fetched over the git native
transfer is below this limit, then the objects will be
unpacked into loose object files. However if the number
of received objects equals or exceeds this limit then
the received pack will be stored as a pack, after adding
any missing delta bases. Storing the pack from a push
can make the push operation complete faster, especially
on slow filesystems. If not set, the value of
transfer.unpackLimit is used instead.
format.attach
Enable multipart/mixed attachments as the default for
format-patch. The value can also be a double quoted
string which will enable attachments as the default and
set the value as the boundary. See the --attach option
in git-format-patch(1).
format.numbered
A boolean which can enable or disable sequence numbers
in patch subjects. It defaults to "auto" which enables
it only if there is more than one patch. It can be
enabled or disabled for all messages by setting it to
"true" or "false". See --numbered option in git-format-
patch(1).
format.headers
Additional email headers to include in a patch to be
submitted by mail. See git-format-patch(1).
format.to, format.cc
Additional recipients to include in a patch to be
submitted by mail. See the --to and --cc options in git-
format-patch(1).
format.subjectprefix
The default for format-patch is to output files with the
[PATCH] subject prefix. Use this variable to change that
prefix.
format.signature
The default for format-patch is to output a signature
containing the git version number. Use this variable to
change that default. Set this variable to the empty
string ("") to suppress signature generation.
format.suffix
The default for format-patch is to output files with the
Git 1.7.9.2 Last change: 02/22/2012 29
Git Manual GIT-CONFIG(1)
suffix .patch. Use this variable to change that suffix
(make sure to include the dot if you want it).
format.pretty
The default pretty format for log/show/whatchanged
command, See git-log(1), git-show(1), git-
whatchanged(1).
format.thread
The default threading style for git format-patch. Can be
a boolean value, or shallow or deep. shallow threading
makes every mail a reply to the head of the series,
where the head is chosen from the cover letter, the
--in-reply-to, and the first patch mail, in this order.
deep threading makes every mail a reply to the previous
one. A true boolean value is the same as shallow, and a
false value disables threading.
format.signoff
A boolean value which lets you enable the -s/--signoff
option of format-patch by default. Note: Adding the
Signed-off-by: line to a patch should be a conscious act
and means that you certify you have the rights to submit
this work under the same open source license. Please see
the SubmittingPatches document for further discussion.
filter.<driver>.clean
The command which is used to convert the content of a
worktree file to a blob upon checkin. See
gitattributes(4) for details.
filter.<driver>.smudge
The command which is used to convert the content of a
blob object to a worktree file upon checkout. See
gitattributes(4) for details.
gc.aggressiveWindow
The window size parameter used in the delta compression
algorithm used by git gc --aggressive. This defaults to
250.
gc.auto
When there are approximately more than this many loose
objects in the repository, git gc --auto will pack them.
Some Porcelain commands use this command to perform a
light-weight garbage collection from time to time. The
default value is 6700. Setting this to 0 disables it.
gc.autopacklimit
When there are more than this many packs that are not
marked with *.keep file in the repository, git gc --auto
consolidates them into one larger pack. The default
Git 1.7.9.2 Last change: 02/22/2012 30
Git Manual GIT-CONFIG(1)
value is 50. Setting this to 0 disables it.
gc.packrefs
Running git pack-refs in a repository renders it
unclonable by Git versions prior to 1.5.1.2 over dumb
transports such as HTTP. This variable determines
whether git gc runs git pack-refs. This can be set to
notbare to enable it within all non-bare repos or it can
be set to a boolean value. The default is true.
gc.pruneexpire
When git gc is run, it will call prune --expire
2.weeks.ago. Override the grace period with this config
variable. The value "now" may be used to disable this
grace period and always prune unreachable objects
immediately.
gc.reflogexpire, gc.<pattern>.reflogexpire
git reflog expire removes reflog entries older than this
time; defaults to 90 days. With "<pattern>" (e.g.
"refs/stash") in the middle the setting applies only to
the refs that match the <pattern>.
gc.reflogexpireunreachable, gc.<ref>.reflogexpireunreachable
git reflog expire removes reflog entries older than this
time and are not reachable from the current tip;
defaults to 30 days. With "<pattern>" (e.g.
"refs/stash") in the middle, the setting applies only to
the refs that match the <pattern>.
gc.rerereresolved
Records of conflicted merge you resolved earlier are
kept for this many days when git rerere gc is run. The
default is 60 days. See git-rerere(1).
gc.rerereunresolved
Records of conflicted merge you have not resolved are
kept for this many days when git rerere gc is run. The
default is 15 days. See git-rerere(1).
gitcvs.commitmsgannotation
Append this string to each commit message. Set to empty
string to disable this feature. Defaults to "via git-CVS
emulator".
gitcvs.enabled
Whether the CVS server interface is enabled for this
repository. See git-cvsserver(1).
Git 1.7.9.2 Last change: 02/22/2012 31
Git Manual GIT-CONFIG(1)
gitcvs.logfile
Path to a log file where the CVS server interface
well... logs various stuff. See git-cvsserver(1).
gitcvs.usecrlfattr
If true, the server will look up the end-of-line
conversion attributes for files to determine the -k
modes to use. If the attributes force git to treat a
file as text, the -k mode will be left blank so CVS
clients will treat it as text. If they suppress text
conversion, the file will be set with -kb mode, which
suppresses any newline munging the client might
otherwise do. If the attributes do not allow the file
type to be determined, then gitcvs.allbinary is used.
See gitattributes(4).
gitcvs.allbinary
This is used if gitcvs.usecrlfattr does not resolve the
correct -kb mode to use. If true, all unresolved files
are sent to the client in mode -kb. This causes the
client to treat them as binary files, which suppresses
any newline munging it otherwise might do.
Alternatively, if it is set to "guess", then the
contents of the file are examined to decide if it is
binary, similar to core.autocrlf.
gitcvs.dbname
Database used by git-cvsserver to cache revision
information derived from the git repository. The exact
meaning depends on the used database driver, for SQLite
(which is the default driver) this is a filename.
Supports variable substitution (see git-cvsserver(1) for
details). May not contain semicolons (;). Default:
%Ggitcvs.%m.sqlite
gitcvs.dbdriver
Used Perl DBI driver. You can specify any available
driver for this here, but it might not work.
git-cvsserver is tested with DBD::SQLite, reported to
work with DBD::Pg, and reported not to work with
DBD::mysql. Experimental feature. May not contain double
colons (:). Default: SQLite. See git-cvsserver(1).
gitcvs.dbuser, gitcvs.dbpass
Database user and password. Only useful if setting
gitcvs.dbdriver, since SQLite has no concept of database
users and/or passwords. gitcvs.dbuser supports variable
substitution (see git-cvsserver(1) for details).
gitcvs.dbTableNamePrefix
Database table name prefix. Prepended to the names of
any database tables used, allowing a single database to
Git 1.7.9.2 Last change: 02/22/2012 32
Git Manual GIT-CONFIG(1)
be used for several repositories. Supports variable
substitution (see git-cvsserver(1) for details). Any
non-alphabetic characters will be replaced with
underscores.
All gitcvs variables except for gitcvs.usecrlfattr and
gitcvs.allbinary can also be specified as
gitcvs.<access_method>.<varname> (where access_method is one
of "ext" and "pserver") to make them apply only for the
given access method.
gitweb.category, gitweb.description, gitweb.owner,
gitweb.url
See gitweb(1) for description.
gitweb.avatar, gitweb.blame, gitweb.grep, gitweb.highlight,
gitweb.patches, gitweb.pickaxe, gitweb.remote_heads,
gitweb.showsizes, gitweb.snapshot
See gitweb.conf(4) for description.
grep.lineNumber
If set to true, enable -n option by default.
grep.extendedRegexp
If set to true, enable --extended-regexp option by
default.
gpg.program
Use this custom program instead of "gpg" found on $PATH
when making or verifying a PGP signature. The program
must support the same command line interface as GPG,
namely, to verify a detached signature, "gpg --verify
$file - <$signature" is run, and the program is expected
to signal a good signature by exiting with code 0, and
to generate an ascii-armored detached signature, the
standard input of "gpg -bsau $key" is fed with the
contents to be signed, and the program is expected to
send the result to its standard output.
gui.commitmsgwidth
Defines how wide the commit message window is in the
git-gui(1). "75" is the default.
gui.diffcontext
Specifies how many context lines should be used in calls
to diff made by the git-gui(1). The default is "4".
gui.encoding
Specifies the default encoding to use for displaying of
file contents in git-gui(1) and gitk(1). It can be
overridden by setting the encoding attribute for
relevant files (see gitattributes(4)). If this option is
Git 1.7.9.2 Last change: 02/22/2012 33
Git Manual GIT-CONFIG(1)
not set, the tools default to the locale encoding.
gui.matchtrackingbranch
Determines if new branches created with git-gui(1)
should default to tracking remote branches with matching
names or not. Default: "false".
gui.newbranchtemplate
Is used as suggested name when creating new branches
using the git-gui(1).
gui.pruneduringfetch
"true" if git-gui(1) should prune remote-tracking
branches when performing a fetch. The default value is
"false".
gui.trustmtime
Determines if git-gui(1) should trust the file
modification timestamp or not. By default the timestamps
are not trusted.
gui.spellingdictionary
Specifies the dictionary used for spell checking commit
messages in the git-gui(1). When set to "none" spell
checking is turned off.
gui.fastcopyblame
If true, git gui blame uses -C instead of -C -C for
original location detection. It makes blame
significantly faster on huge repositories at the expense
of less thorough copy detection.
gui.copyblamethreshold
Specifies the threshold to use in git gui blame original
location detection, measured in alphanumeric characters.
See the git-blame(1) manual for more information on copy
detection.
gui.blamehistoryctx
Specifies the radius of history context in days to show
in gitk(1) for the selected commit, when the Show
History Context menu item is invoked from git gui blame.
If this variable is set to zero, the whole history is
shown.
guitool.<name>.cmd
Specifies the shell command line to execute when the
corresponding item of the git-gui(1) Tools menu is
invoked. This option is mandatory for every tool. The
command is executed from the root of the working
directory, and in the environment it receives the name
of the tool as GIT_GUITOOL, the name of the currently
Git 1.7.9.2 Last change: 02/22/2012 34
Git Manual GIT-CONFIG(1)
selected file as FILENAME, and the name of the current
branch as CUR_BRANCH (if the head is detached,
CUR_BRANCH is empty).
guitool.<name>.needsfile
Run the tool only if a diff is selected in the GUI. It
guarantees that FILENAME is not empty.
guitool.<name>.noconsole
Run the command silently, without creating a window to
display its output.
guitool.<name>.norescan
Don't rescan the working directory for changes after the
tool finishes execution.
guitool.<name>.confirm
Show a confirmation dialog before actually running the
tool.
guitool.<name>.argprompt
Request a string argument from the user, and pass it to
the tool through the ARGS environment variable. Since
requesting an argument implies confirmation, the confirm
option has no effect if this is enabled. If the option
is set to true, yes, or 1, the dialog uses a built-in
generic prompt; otherwise the exact value of the
variable is used.
guitool.<name>.revprompt
Request a single valid revision from the user, and set
the REVISION environment variable. In other aspects this
option is similar to argprompt, and can be used together
with it.
guitool.<name>.revunmerged
Show only unmerged branches in the revprompt subdialog.
This is useful for tools similar to merge or rebase, but
not for things like checkout or reset.
guitool.<name>.title
Specifies the title to use for the prompt dialog. The
default is the tool name.
guitool.<name>.prompt
Specifies the general prompt string to display at the
top of the dialog, before subsections for argprompt and
revprompt. The default value includes the actual
command.
help.browser
Specify the browser that will be used to display help in
Git 1.7.9.2 Last change: 02/22/2012 35
Git Manual GIT-CONFIG(1)
the web format. See git-help(1).
help.format
Override the default help format used by git-help(1).
Values man, info, web and html are supported. man is
the default. web and html are the same.
help.autocorrect
Automatically correct and execute mistyped commands
after waiting for the given number of deciseconds (0.1
sec). If more than one command can be deduced from the
entered text, nothing will be executed. If the value of
this option is negative, the corrected command will be
executed immediately. If the value is 0 - the command
will be just shown but not executed. This is the
default.
http.proxy
Override the HTTP proxy, normally configured using the
http_proxy environment variable (see curl(1)). This can
be overridden on a per-remote basis; see
remote.<name>.proxy
http.cookiefile
File containing previously stored cookie lines which
should be used in the git http session, if they match
the server. The file format of the file to read cookies
from should be plain HTTP headers or the
Netscape/Mozilla cookie file format (see curl(1)). NOTE
that the file specified with http.cookiefile is only
used as input. No cookies will be stored in the file.
http.sslVerify
Whether to verify the SSL certificate when fetching or
pushing over HTTPS. Can be overridden by the
GIT_SSL_NO_VERIFY environment variable.
http.sslCert
File containing the SSL certificate when fetching or
pushing over HTTPS. Can be overridden by the
GIT_SSL_CERT environment variable.
http.sslKey
File containing the SSL private key when fetching or
pushing over HTTPS. Can be overridden by the GIT_SSL_KEY
environment variable.
http.sslCertPasswordProtected
Enable git's password prompt for the SSL certificate.
Otherwise OpenSSL will prompt the user, possibly many
times, if the certificate or private key is encrypted.
Can be overridden by the GIT_SSL_CERT_PASSWORD_PROTECTED
Git 1.7.9.2 Last change: 02/22/2012 36
Git Manual GIT-CONFIG(1)
environment variable.
http.sslCAInfo
File containing the certificates to verify the peer with
when fetching or pushing over HTTPS. Can be overridden
by the GIT_SSL_CAINFO environment variable.
http.sslCAPath
Path containing files with the CA certificates to verify
the peer with when fetching or pushing over HTTPS. Can
be overridden by the GIT_SSL_CAPATH environment
variable.
http.maxRequests
How many HTTP requests to launch in parallel. Can be
overridden by the GIT_HTTP_MAX_REQUESTS environment
variable. Default is 5.
http.minSessions
The number of curl sessions (counted across slots) to be
kept across requests. They will not be ended with
curl_easy_cleanup() until http_cleanup() is invoked. If
USE_CURL_MULTI is not defined, this value will be capped
at 1. Defaults to 1.
http.postBuffer
Maximum size in bytes of the buffer used by smart HTTP
transports when POSTing data to the remote system. For
requests larger than this buffer size, HTTP/1.1 and
Transfer-Encoding: chunked is used to avoid creating a
massive pack file locally. Default is 1 MiB, which is
sufficient for most requests.
http.lowSpeedLimit, http.lowSpeedTime
If the HTTP transfer speed is less than
http.lowSpeedLimit for longer than http.lowSpeedTime
seconds, the transfer is aborted. Can be overridden by
the GIT_HTTP_LOW_SPEED_LIMIT and GIT_HTTP_LOW_SPEED_TIME
environment variables.
http.noEPSV
A boolean which disables using of EPSV ftp command by
curl. This can helpful with some "poor" ftp servers
which don't support EPSV mode. Can be overridden by the
GIT_CURL_FTP_NO_EPSV environment variable. Default is
false (curl will use EPSV).
http.useragent
The HTTP USER_AGENT string presented to an HTTP server.
The default value represents the version of the client
git such as git/1.7.1. This option allows you to
override this value to a more common value such as
Git 1.7.9.2 Last change: 02/22/2012 37
Git Manual GIT-CONFIG(1)
Mozilla/4.0. This may be necessary, for instance, if
connecting through a firewall that restricts HTTP
connections to a set of common USER_AGENT strings (but
not including those like git/1.7.1). Can be overridden
by the GIT_HTTP_USER_AGENT environment variable.
i18n.commitEncoding
Character encoding the commit messages are stored in;
git itself does not care per se, but this information is
necessary e.g. when importing commits from emails or in
the gitk graphical history browser (and possibly at
other places in the future or in other porcelains). See
e.g. git-mailinfo(1). Defaults to utf-8.
i18n.logOutputEncoding
Character encoding the commit messages are converted to
when running git log and friends.
imap
The configuration variables in the imap section are
described in git-imap-send(1).
init.templatedir
Specify the directory from which templates will be
copied. (See the "TEMPLATE DIRECTORY" section of git-
init(1).)
instaweb.browser
Specify the program that will be used to browse your
working repository in gitweb. See git-instaweb(1).
instaweb.httpd
The HTTP daemon command-line to start gitweb on your
working repository. See git-instaweb(1).
instaweb.local
If true the web server started by git-instaweb(1) will
be bound to the local IP (127.0.0.1).
instaweb.modulepath
The default module path for git-instaweb(1) to use
instead of /usr/lib/apache2/modules. Only used if httpd
is Apache.
instaweb.port
The port number to bind the gitweb httpd to. See git-
instaweb(1).
interactive.singlekey
In interactive commands, allow the user to provide
one-letter input with a single key (i.e., without
hitting enter). Currently this is used by the --patch
Git 1.7.9.2 Last change: 02/22/2012 38
Git Manual GIT-CONFIG(1)
mode of git-add(1), git-checkout(1), git-commit(1), git-
reset(1), and git-stash(1). Note that this setting is
silently ignored if portable keystroke input is not
available.
log.abbrevCommit
If true, makes git-log(1), git-show(1), and git-
whatchanged(1) assume --abbrev-commit. You may override
this option with --no-abbrev-commit.
log.date
Set the default date-time mode for the log command.
Setting a value for log.date is similar to using git
log's --date option. Possible values are relative,
local, default, iso, rfc, and short; see git-log(1) for
details.
log.decorate
Print out the ref names of any commits that are shown by
the log command. If short is specified, the ref name
prefixes refs/heads/, refs/tags/ and refs/remotes/ will
not be printed. If full is specified, the full ref name
(including prefix) will be printed. This is the same as
the log commands --decorate option.
log.showroot
If true, the initial commit will be shown as a big
creation event. This is equivalent to a diff against an
empty tree. Tools like git-log(1) or git-whatchanged(1),
which normally hide the root commit will now show it.
True by default.
mailmap.file
The location of an augmenting mailmap file. The default
mailmap, located in the root of the repository, is
loaded first, then the mailmap file pointed to by this
variable. The location of the mailmap file may be in a
repository subdirectory, or somewhere outside of the
repository itself. See git-shortlog(1) and git-blame(1).
man.viewer
Specify the programs that may be used to display help in
the man format. See git-help(1).
man.<tool>.cmd
Specify the command to invoke the specified man viewer.
The specified command is evaluated in shell with the man
page passed as argument. (See git-help(1).)
man.<tool>.path
Override the path for the given tool that may be used to
display help in the man format. See git-help(1).
Git 1.7.9.2 Last change: 02/22/2012 39
Git Manual GIT-CONFIG(1)
merge.conflictstyle
Specify the style in which conflicted hunks are written
out to working tree files upon merge. The default is
"merge", which shows a <<<<<<< conflict marker, changes
made by one side, a ======= marker, changes made by the
other side, and then a >>>>>>> marker. An alternate
style, "diff3", adds a ||||||| marker and the original
text before the ======= marker.
merge.defaultToUpstream
If merge is called without any commit argument, merge
the upstream branches configured for the current branch
by using their last observed values stored in their
remote tracking branches. The values of the
branch.<current branch>.merge that name the branches at
the remote named by branch.<current branch>.remote are
consulted, and then they are mapped via
remote.<remote>.fetch to their corresponding remote
tracking branches, and the tips of these tracking
branches are merged.
merge.ff
By default, git does not create an extra merge commit
when merging a commit that is a descendant of the
current commit. Instead, the tip of the current branch
is fast-forwarded. When set to false, this variable
tells git to create an extra merge commit in such a case
(equivalent to giving the --no-ff option from the
command line). When set to only, only such fast-forward
merges are allowed (equivalent to giving the --ff-only
option from the command line).
merge.log
In addition to branch names, populate the log message
with at most the specified number of one-line
descriptions from the actual commits that are being
merged. Defaults to false, and true is a synonym for 20.
merge.renameLimit
The number of files to consider when performing rename
detection during a merge; if not specified, defaults to
the value of diff.renameLimit.
merge.renormalize
Tell git that canonical representation of files in the
repository has changed over time (e.g. earlier commits
record text files with CRLF line endings, but recent
ones use LF line endings). In such a repository, git can
convert the data recorded in commits to a canonical form
before performing a merge to reduce unnecessary
conflicts. For more information, see section "Merging
branches with differing checkin/checkout attributes" in
Git 1.7.9.2 Last change: 02/22/2012 40
Git Manual GIT-CONFIG(1)
gitattributes(4).
merge.stat
Whether to print the diffstat between ORIG_HEAD and the
merge result at the end of the merge. True by default.
merge.tool
Controls which merge resolution program is used by git-
mergetool(1). Valid built-in values are: "araxis",
"bc3", "diffuse", "ecmerge", "emerge", "gvimdiff",
"kdiff3", "meld", "opendiff", "p4merge", "tkdiff",
"tortoisemerge", "vimdiff" and "xxdiff". Any other value
is treated is custom merge tool and there must be a
corresponding mergetool.<tool>.cmd option.
merge.verbosity
Controls the amount of output shown by the recursive
merge strategy. Level 0 outputs nothing except a final
error message if conflicts were detected. Level 1
outputs only conflicts, 2 outputs conflicts and file
changes. Level 5 and above outputs debugging
information. The default is level 2. Can be overridden
by the GIT_MERGE_VERBOSITY environment variable.
merge.<driver>.name
Defines a human-readable name for a custom low-level
merge driver. See gitattributes(4) for details.
merge.<driver>.driver
Defines the command that implements a custom low-level
merge driver. See gitattributes(4) for details.
merge.<driver>.recursive
Names a low-level merge driver to be used when
performing an internal merge between common ancestors.
See gitattributes(4) for details.
mergetool.<tool>.path
Override the path for the given tool. This is useful in
case your tool is not in the PATH.
mergetool.<tool>.cmd
Specify the command to invoke the specified merge tool.
The specified command is evaluated in shell with the
following variables available: BASE is the name of a
temporary file containing the common base of the files
to be merged, if available; LOCAL is the name of a
temporary file containing the contents of the file on
the current branch; REMOTE is the name of a temporary
file containing the contents of the file from the branch
being merged; MERGED contains the name of the file to
which the merge tool should write the results of a
Git 1.7.9.2 Last change: 02/22/2012 41
Git Manual GIT-CONFIG(1)
successful merge.
mergetool.<tool>.trustExitCode
For a custom merge command, specify whether the exit
code of the merge command can be used to determine
whether the merge was successful. If this is not set to
true then the merge target file timestamp is checked and
the merge assumed to have been successful if the file
has been updated, otherwise the user is prompted to
indicate the success of the merge.
mergetool.keepBackup
After performing a merge, the original file with
conflict markers can be saved as a file with a .orig
extension. If this variable is set to false then this
file is not preserved. Defaults to true (i.e. keep the
backup files).
mergetool.keepTemporaries
When invoking a custom merge tool, git uses a set of
temporary files to pass to the tool. If the tool returns
an error and this variable is set to true, then these
temporary files will be preserved, otherwise they will
be removed after the tool has exited. Defaults to false.
mergetool.prompt
Prompt before each invocation of the merge resolution
program.
notes.displayRef
The (fully qualified) refname from which to show notes
when showing commit messages. The value of this variable
can be set to a glob, in which case notes from all
matching refs will be shown. You may also specify this
configuration variable several times. A warning will be
issued for refs that do not exist, but a glob that does
not match any refs is silently ignored.
This setting can be overridden with the
GIT_NOTES_DISPLAY_REF environment variable, which must
be a colon separated list of refs or globs.
The effective value of "core.notesRef" (possibly
overridden by GIT_NOTES_REF) is also implicitly added to
the list of refs to be displayed.
notes.rewrite.<command>
When rewriting commits with <command> (currently amend
or rebase) and this variable is set to true, git
automatically copies your notes from the original to the
rewritten commit. Defaults to true, but see
"notes.rewriteRef" below.
Git 1.7.9.2 Last change: 02/22/2012 42
Git Manual GIT-CONFIG(1)
notes.rewriteMode
When copying notes during a rewrite (see the
"notes.rewrite.<command>" option), determines what to do
if the target commit already has a note. Must be one of
overwrite, concatenate, or ignore. Defaults to
concatenate.
This setting can be overridden with the
GIT_NOTES_REWRITE_MODE environment variable.
notes.rewriteRef
When copying notes during a rewrite, specifies the
(fully qualified) ref whose notes should be copied. The
ref may be a glob, in which case notes in all matching
refs will be copied. You may also specify this
configuration several times.
Does not have a default value; you must configure this
variable to enable note rewriting. Set it to
refs/notes/commits to enable rewriting for the default
commit notes.
This setting can be overridden with the
GIT_NOTES_REWRITE_REF environment variable, which must
be a colon separated list of refs or globs.
pack.window
The size of the window used by git-pack-objects(1) when
no window size is given on the command line. Defaults to
10.
pack.depth
The maximum delta depth used by git-pack-objects(1) when
no maximum depth is given on the command line. Defaults
to 50.
pack.windowMemory
The window memory size limit used by git-pack-objects(1)
when no limit is given on the command line. The value
can be suffixed with "k", "m", or "g". Defaults to 0,
meaning no limit.
pack.compression
An integer -1..9, indicating the compression level for
objects in a pack file. -1 is the zlib default. 0 means
no compression, and 1..9 are various speed/size
tradeoffs, 9 being slowest. If not set, defaults to
core.compression. If that is not set, defaults to -1,
the zlib default, which is "a default compromise between
speed and compression (currently equivalent to level
6)."
Git 1.7.9.2 Last change: 02/22/2012 43
Git Manual GIT-CONFIG(1)
Note that changing the compression level will not
automatically recompress all existing objects. You can
force recompression by passing the -F option to git-
repack(1).
pack.deltaCacheSize
The maximum memory in bytes used for caching deltas in
git-pack-objects(1) before writing them out to a pack.
This cache is used to speed up the writing object phase
by not having to recompute the final delta result once
the best match for all objects is found. Repacking large
repositories on machines which are tight with memory
might be badly impacted by this though, especially if
this cache pushes the system into swapping. A value of 0
means no limit. The smallest size of 1 byte may be used
to virtually disable this cache. Defaults to 256 MiB.
pack.deltaCacheLimit
The maximum size of a delta, that is cached in git-pack-
objects(1). This cache is used to speed up the writing
object phase by not having to recompute the final delta
result once the best match for all objects is found.
Defaults to 1000.
pack.threads
Specifies the number of threads to spawn when searching
for best delta matches. This requires that git-pack-
objects(1) be compiled with pthreads otherwise this
option is ignored with a warning. This is meant to
reduce packing time on multiprocessor machines. The
required amount of memory for the delta search window is
however multiplied by the number of threads. Specifying
0 will cause git to auto-detect the number of CPU's and
set the number of threads accordingly.
pack.indexVersion
Specify the default pack index version. Valid values are
1 for legacy pack index used by Git versions prior to
1.5.2, and 2 for the new pack index with capabilities
for packs larger than 4 GB as well as proper protection
against the repacking of corrupted packs. Version 2 is
the default. Note that version 2 is enforced and this
config option ignored whenever the corresponding pack is
larger than 2 GB.
If you have an old git that does not understand the
version 2 *.idx file, cloning or fetching over a non
native protocol (e.g. "http" and "rsync") that will copy
both *.pack file and corresponding *.idx file from the
other side may give you a repository that cannot be
accessed with your older version of git. If the *.pack
file is smaller than 2 GB, however, you can use git-
Git 1.7.9.2 Last change: 02/22/2012 44
Git Manual GIT-CONFIG(1)
index-pack(1) on the *.pack file to regenerate the *.idx
file.
pack.packSizeLimit
The maximum size of a pack. This setting only affects
packing to a file when repacking, i.e. the git://
protocol is unaffected. It can be overridden by the
--max-pack-size option of git-repack(1). The minimum
size allowed is limited to 1 MiB. The default is
unlimited. Common unit suffixes of k, m, or g are
supported.
pager.<cmd>
If the value is boolean, turns on or off pagination of
the output of a particular git subcommand when writing
to a tty. Otherwise, turns on pagination for the
subcommand using the pager specified by the value of
pager.<cmd>. If --paginate or --no-pager is specified on
the command line, it takes precedence over this option.
To disable pagination for all commands, set core.pager
or GIT_PAGER to cat.
pretty.<name>
Alias for a --pretty= format string, as specified in
git-log(1). Any aliases defined here can be used just as
the built-in pretty formats could. For example, running
git config pretty.changelog "format:* %H %s" would cause
the invocation git log --pretty=changelog to be
equivalent to running git log "--pretty=format:* %H %s".
Note that an alias with the same name as a built-in
format will be silently ignored.
pull.rebase
When true, rebase branches on top of the fetched branch,
instead of merging the default branch from the default
remote when "git pull" is run. See
"branch.<name>.rebase" for setting this on a per-branch
basis.
NOTE: this is a possibly dangerous operation; do not use
it unless you understand the implications (see git-
rebase(1) for details).
pull.octopus
The default merge strategy to use when pulling multiple
branches at once.
pull.twohead
The default merge strategy to use when pulling a single
branch.
Git 1.7.9.2 Last change: 02/22/2012 45
Git Manual GIT-CONFIG(1)
push.default
Defines the action git push should take if no refspec is
given on the command line, no refspec is configured in
the remote, and no refspec is implied by any of the
options given on the command line. Possible values are:
o nothing - do not push anything.
o matching - push all matching branches. All branches
having the same name in both ends are considered to
be matching. This is the default.
o upstream - push the current branch to its upstream
branch.
o tracking - deprecated synonym for upstream.
o current - push the current branch to a branch of
the same name.
rebase.stat
Whether to show a diffstat of what changed upstream
since the last rebase. False by default.
rebase.autosquash
If set to true enable --autosquash option by default.
receive.autogc
By default, git-receive-pack will run "git-gc --auto"
after receiving data from git-push and updating refs.
You can stop it by setting this variable to false.
receive.fsckObjects
If it is set to true, git-receive-pack will check all
received objects. It will abort in the case of a
malformed object or a broken link. The result of an
abort are only dangling objects. Defaults to false. If
not set, the value of transfer.fsckObjects is used
instead.
receive.unpackLimit
If the number of objects received in a push is below
this limit then the objects will be unpacked into loose
object files. However if the number of received objects
equals or exceeds this limit then the received pack will
be stored as a pack, after adding any missing delta
bases. Storing the pack from a push can make the push
operation complete faster, especially on slow
filesystems. If not set, the value of
transfer.unpackLimit is used instead.
Git 1.7.9.2 Last change: 02/22/2012 46
Git Manual GIT-CONFIG(1)
receive.denyDeletes
If set to true, git-receive-pack will deny a ref update
that deletes the ref. Use this to prevent such a ref
deletion via a push.
receive.denyDeleteCurrent
If set to true, git-receive-pack will deny a ref update
that deletes the currently checked out branch of a
non-bare repository.
receive.denyCurrentBranch
If set to true or "refuse", git-receive-pack will deny a
ref update to the currently checked out branch of a
non-bare repository. Such a push is potentially
dangerous because it brings the HEAD out of sync with
the index and working tree. If set to "warn", print a
warning of such a push to stderr, but allow the push to
proceed. If set to false or "ignore", allow such pushes
with no message. Defaults to "refuse".
receive.denyNonFastForwards
If set to true, git-receive-pack will deny a ref update
which is not a fast-forward. Use this to prevent such an
update via a push, even if that push is forced. This
configuration variable is set when initializing a shared
repository.
receive.updateserverinfo
If set to true, git-receive-pack will run
git-update-server-info after receiving data from
git-push and updating refs.
remote.<name>.url
The URL of a remote repository. See git-fetch(1) or git-
push(1).
remote.<name>.pushurl
The push URL of a remote repository. See git-push(1).
remote.<name>.proxy
For remotes that require curl (http, https and ftp), the
URL to the proxy to use for that remote. Set to the
empty string to disable proxying for that remote.
remote.<name>.fetch
The default set of "refspec" for git-fetch(1). See git-
fetch(1).
remote.<name>.push
The default set of "refspec" for git-push(1). See git-
push(1).
Git 1.7.9.2 Last change: 02/22/2012 47
Git Manual GIT-CONFIG(1)
remote.<name>.mirror
If true, pushing to this remote will automatically
behave as if the --mirror option was given on the
command line.
remote.<name>.skipDefaultUpdate
If true, this remote will be skipped by default when
updating using git-fetch(1) or the update subcommand of
git-remote(1).
remote.<name>.skipFetchAll
If true, this remote will be skipped by default when
updating using git-fetch(1) or the update subcommand of
git-remote(1).
remote.<name>.receivepack
The default program to execute on the remote side when
pushing. See option --receive-pack of git-push(1).
remote.<name>.uploadpack
The default program to execute on the remote side when
fetching. See option --upload-pack of git-fetch-pack(1).
remote.<name>.tagopt
Setting this value to --no-tags disables automatic tag
following when fetching from remote <name>. Setting it
to --tags will fetch every tag from remote <name>, even
if they are not reachable from remote branch heads.
Passing these flags directly to git-fetch(1) can
override this setting. See options --tags and --no-tags
of git-fetch(1).
remote.<name>.vcs
Setting this to a value <vcs> will cause git to interact
with the remote with the git-remote-<vcs> helper.
remotes.<group>
The list of remotes which are fetched by "git remote
update <group>". See git-remote(1).
repack.usedeltabaseoffset
By default, git-repack(1) creates packs that use
delta-base offset. If you need to share your repository
with git older than version 1.4.4, either directly or
via a dumb protocol such as http, then you need to set
this option to "false" and repack. Access from old git
versions over the native protocol are unaffected by this
option.
rerere.autoupdate
When set to true, git-rerere updates the index with the
resulting contents after it cleanly resolves conflicts
Git 1.7.9.2 Last change: 02/22/2012 48
Git Manual GIT-CONFIG(1)
using previously recorded resolution. Defaults to false.
rerere.enabled
Activate recording of resolved conflicts, so that
identical conflict hunks can be resolved automatically,
should they be encountered again. By default, git-
rerere(1) is enabled if there is an rr-cache directory
under the $GIT_DIR, e.g. if "rerere" was previously used
in the repository.
sendemail.identity
A configuration identity. When given, causes values in
the sendemail.<identity> subsection to take precedence
over values in the sendemail section. The default
identity is the value of sendemail.identity.
sendemail.smtpencryption
See git-send-email(1) for description. Note that this
setting is not subject to the identity mechanism.
sendemail.smtpssl
Deprecated alias for sendemail.smtpencryption = ssl.
sendemail.<identity>.*
Identity-specific versions of the sendemail.*
parameters found below, taking precedence over those
when the this identity is selected, through command-line
or sendemail.identity.
sendemail.aliasesfile, sendemail.aliasfiletype,
sendemail.bcc, sendemail.cc, sendemail.cccmd,
sendemail.chainreplyto, sendemail.confirm,
sendemail.envelopesender, sendemail.from,
sendemail.multiedit, sendemail.signedoffbycc,
sendemail.smtppass, sendemail.suppresscc,
sendemail.suppressfrom, sendemail.to, sendemail.smtpdomain,
sendemail.smtpserver, sendemail.smtpserverport,
sendemail.smtpserveroption, sendemail.smtpuser,
sendemail.thread, sendemail.validate
See git-send-email(1) for description.
sendemail.signedoffcc
Deprecated alias for sendemail.signedoffbycc.
showbranch.default
The default set of branches for git-show-branch(1). See
git-show-branch(1).
status.relativePaths
By default, git-status(1) shows paths relative to the
current directory. Setting this variable to false shows
paths relative to the repository root (this was the
Git 1.7.9.2 Last change: 02/22/2012 49
Git Manual GIT-CONFIG(1)
default for git prior to v1.5.4).
status.showUntrackedFiles
By default, git-status(1) and git-commit(1) show files
which are not currently tracked by Git. Directories
which contain only untracked files, are shown with the
directory name only. Showing untracked files means that
Git needs to lstat() all all the files in the whole
repository, which might be slow on some systems. So,
this variable controls how the commands displays the
untracked files. Possible values are:
o no - Show no untracked files.
o normal - Show untracked files and directories.
o all - Show also individual files in untracked
directories.
If this variable is not specified, it defaults to
normal. This variable can be overridden with the
-u|--untracked-files option of git-status(1) and git-
commit(1).
status.submodulesummary
Defaults to false. If this is set to a non zero number
or true (identical to -1 or an unlimited number), the
submodule summary will be enabled and a summary of
commits for modified submodules will be shown (see
--summary-limit option of git-submodule(1)).
submodule.<name>.path, submodule.<name>.url,
submodule.<name>.update
The path within this project, URL, and the updating
strategy for a submodule. These variables are initially
populated by git submodule init; edit them to override
the URL and other values found in the .gitmodules file.
See git-submodule(1) and gitmodules(4) for details.
submodule.<name>.fetchRecurseSubmodules
This option can be used to control recursive fetching of
this submodule. It can be overridden by using the
--[no-]recurse-submodules command line option to "git
fetch" and "git pull". This setting will override that
from in the gitmodules(4) file.
submodule.<name>.ignore
Defines under what circumstances "git status" and the
diff family show a submodule as modified. When set to
"all", it will never be considered modified, "dirty"
will ignore all changes to the submodules work tree and
takes only differences between the HEAD of the submodule
Git 1.7.9.2 Last change: 02/22/2012 50
Git Manual GIT-CONFIG(1)
and the commit recorded in the superproject into
account. "untracked" will additionally let submodules
with modified tracked files in their work tree show up.
Using "none" (the default when this option is not set)
also shows submodules that have untracked files in their
work tree as changed. This setting overrides any setting
made in .gitmodules for this submodule, both settings
can be overridden on the command line by using the
"--ignore-submodules" option.
tar.umask
This variable can be used to restrict the permission
bits of tar archive entries. The default is 0002, which
turns off the world write bit. The special value "user"
indicates that the archiving user's umask will be used
instead. See umask(2) and git-archive(1).
transfer.fsckObjects
When fetch.fsckObjects or receive.fsckObjects are not
set, the value of this variable is used instead.
Defaults to false.
transfer.unpackLimit
When fetch.unpackLimit or receive.unpackLimit are not
set, the value of this variable is used instead. The
default value is 100.
url.<base>.insteadOf
Any URL that starts with this value will be rewritten to
start, instead, with <base>. In cases where some site
serves a large number of repositories, and serves them
with multiple access methods, and some users need to use
different access methods, this feature allows people to
specify any of the equivalent URLs and have git
automatically rewrite the URL to the best alternative
for the particular user, even for a never-before-seen
repository on the site. When more than one insteadOf
strings match a given URL, the longest match is used.
url.<base>.pushInsteadOf
Any URL that starts with this value will not be pushed
to; instead, it will be rewritten to start with <base>,
and the resulting URL will be pushed to. In cases where
some site serves a large number of repositories, and
serves them with multiple access methods, some of which
do not allow push, this feature allows people to specify
a pull-only URL and have git automatically use an
appropriate URL to push, even for a never-before-seen
repository on the site. When more than one pushInsteadOf
strings match a given URL, the longest match is used. If
a remote has an explicit pushurl, git will ignore this
setting for that remote.
Git 1.7.9.2 Last change: 02/22/2012 51
Git Manual GIT-CONFIG(1)
user.email
Your email address to be recorded in any newly created
commits. Can be overridden by the GIT_AUTHOR_EMAIL,
GIT_COMMITTER_EMAIL, and EMAIL environment variables.
See git-commit-tree(1).
user.name
Your full name to be recorded in any newly created
commits. Can be overridden by the GIT_AUTHOR_NAME and
GIT_COMMITTER_NAME environment variables. See git-
commit-tree(1).
user.signingkey
If git-tag(1) is not selecting the key you want it to
automatically when creating a signed tag, you can
override the default selection with this variable. This
option is passed unchanged to gpg's --local-user
parameter, so you may specify a key using any method
that gpg supports.
web.browser
Specify a web browser that may be used by some commands.
Currently only git-instaweb(1) and git-help(1) may use
it.
GIT
Part of the git(1) suite
ATTRIBUTES
See attributes(5) for descriptions of the following
attributes:
+---------------+--------------------------+
|ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+---------------+--------------------------+
|Availability | developer/versioning/git |
+---------------+--------------------------+
|Stability | Uncommitted |
+---------------+--------------------------+
NOTES
This software was built from source available at
https://java.net/projects/solaris-userland. The original
community source was downloaded from http://git-
core.googlecode.com/files/git-1.7.9.2.tar.gz
Further information about this software can be found on the
open source community website at http://git-scm.com/.
Git 1.7.9.2 Last change: 02/22/2012 52