git-rev-list
(1)
名前
git-rev-list - Lists commit objects in reverse chronological
order
形式
git rev-list [ --max-count=<number> ]
[ --skip=<number> ]
[ --max-age=<timestamp> ]
[ --min-age=<timestamp> ]
[ --sparse ]
[ --merges ]
[ --no-merges ]
[ --min-parents=<number> ]
[ --no-min-parents ]
[ --max-parents=<number> ]
[ --no-max-parents ]
[ --first-parent ]
[ --remove-empty ]
[ --full-history ]
[ --not ]
[ --all ]
[ --branches[=<pattern>] ]
[ --tags[=<pattern>] ]
[ --remotes[=<pattern>] ]
[ --glob=<glob-pattern> ]
[ --ignore-missing ]
[ --stdin ]
[ --quiet ]
[ --topo-order ]
[ --parents ]
[ --timestamp ]
[ --left-right ]
[ --left-only ]
[ --right-only ]
[ --cherry-mark ]
[ --cherry-pick ]
[ --encoding[=<encoding>] ]
[ --(author|committer|grep)=<pattern> ]
[ --regexp-ignore-case | -i ]
[ --extended-regexp | -E ]
[ --fixed-strings | -F ]
[ --date=(local|relative|default|iso|rfc|short) ]
[ [--objects | --objects-edge] [ --unpacked ] ]
[ --pretty | --header ]
[ --bisect ]
[ --bisect-vars ]
[ --bisect-all ]
[ --merge ]
[ --reverse ]
[ --walk-reflogs ]
[ --no-walk ] [ --do-walk ]
<commit>... [ -- <paths>... ]
説明
Git Manual GIT-REV-LIST(1)
NAME
git-rev-list - Lists commit objects in reverse chronological
order
SYNOPSIS
git rev-list [ --max-count=<number> ]
[ --skip=<number> ]
[ --max-age=<timestamp> ]
[ --min-age=<timestamp> ]
[ --sparse ]
[ --merges ]
[ --no-merges ]
[ --min-parents=<number> ]
[ --no-min-parents ]
[ --max-parents=<number> ]
[ --no-max-parents ]
[ --first-parent ]
[ --remove-empty ]
[ --full-history ]
[ --not ]
[ --all ]
[ --branches[=<pattern>] ]
[ --tags[=<pattern>] ]
[ --remotes[=<pattern>] ]
[ --glob=<glob-pattern> ]
[ --ignore-missing ]
[ --stdin ]
[ --quiet ]
[ --topo-order ]
[ --parents ]
[ --timestamp ]
[ --left-right ]
[ --left-only ]
[ --right-only ]
[ --cherry-mark ]
[ --cherry-pick ]
[ --encoding[=<encoding>] ]
[ --(author|committer|grep)=<pattern> ]
[ --regexp-ignore-case | -i ]
[ --extended-regexp | -E ]
[ --fixed-strings | -F ]
[ --date=(local|relative|default|iso|rfc|short) ]
[ [--objects | --objects-edge] [ --unpacked ] ]
[ --pretty | --header ]
[ --bisect ]
[ --bisect-vars ]
[ --bisect-all ]
[ --merge ]
[ --reverse ]
[ --walk-reflogs ]
[ --no-walk ] [ --do-walk ]
<commit>... [ -- <paths>... ]
Git 1.7.9.2 Last change: 02/22/2012 1
Git Manual GIT-REV-LIST(1)
DESCRIPTION
List commits that are reachable by following the parent
links from the given commit(s), but exclude commits that are
reachable from the one(s) given with a ^ in front of them.
The output is given in reverse chronological order by
default.
You can think of this as a set operation. Commits given on
the command line form a set of commits that are reachable
from any of them, and then commits reachable from any of the
ones given with ^ in front are subtracted from that set. The
remaining commits are what comes out in the command's
output. Various other options and paths parameters can be
used to further limit the result.
Thus, the following command:
$ git rev-list foo bar ^baz
means "list all the commits which are reachable from foo or
bar, but not from baz".
A special notation "<commit1>..<commit2>" can be used as a
short-hand for "^<commit1> <commit2>". For example, either
of the following may be used interchangeably:
$ git rev-list origin..HEAD
$ git rev-list HEAD ^origin
Another special notation is "<commit1>...<commit2>" which is
useful for merges. The resulting set of commits is the
symmetric difference between the two operands. The following
two commands are equivalent:
$ git rev-list A B --not $(git merge-base --all A B)
$ git rev-list A...B
rev-list is a very essential git command, since it provides
the ability to build and traverse commit ancestry graphs.
For this reason, it has a lot of different options that
enables it to be used by commands as different as git bisect
and git repack.
OPTIONS
Commit Limiting
Besides specifying a range of commits that should be listed
using the special notations explained in the description,
additional commit limiting may be applied. Note that they
are applied before commit ordering and formatting options,
Git 1.7.9.2 Last change: 02/22/2012 2
Git Manual GIT-REV-LIST(1)
such as --reverse.
-n number, --max-count=<number>
Limit the number of commits to output.
--skip=<number>
Skip number commits before starting to show the commit
output.
--since=<date>, --after=<date>
Show commits more recent than a specific date.
--until=<date>, --before=<date>
Show commits older than a specific date.
--max-age=<timestamp>, --min-age=<timestamp>
Limit the commits output to specified time range.
--author=<pattern>, --committer=<pattern>
Limit the commits output to ones with author/committer
header lines that match the specified pattern (regular
expression).
--grep=<pattern>
Limit the commits output to ones with log message that
matches the specified pattern (regular expression).
--all-match
Limit the commits output to ones that match all given
--grep, --author and --committer instead of ones that
match at least one.
-i, --regexp-ignore-case
Match the regexp limiting patterns without regard to
letters case.
-E, --extended-regexp
Consider the limiting patterns to be extended regular
expressions instead of the default basic regular
expressions.
-F, --fixed-strings
Consider the limiting patterns to be fixed strings
(don't interpret pattern as a regular expression).
--remove-empty
Stop when a given path disappears from the tree.
--merges
Print only merge commits. This is exactly the same as
--min-parents=2.
Git 1.7.9.2 Last change: 02/22/2012 3
Git Manual GIT-REV-LIST(1)
--no-merges
Do not print commits with more than one parent. This is
exactly the same as --max-parents=1.
--min-parents=<number>, --max-parents=<number>,
--no-min-parents, --no-max-parents
Show only commits which have at least (or at most) that
many commits. In particular, --max-parents=1 is the same
as --no-merges, --min-parents=2 is the same as --merges.
--max-parents=0 gives all root commits and
--min-parents=3 all octopus merges.
--no-min-parents and --no-max-parents reset these limits
(to no limit) again. Equivalent forms are
--min-parents=0 (any commit has 0 or more parents) and
--max-parents=-1 (negative numbers denote no upper
limit).
--first-parent
Follow only the first parent commit upon seeing a merge
commit. This option can give a better overview when
viewing the evolution of a particular topic branch,
because merges into a topic branch tend to be only about
adjusting to updated upstream from time to time, and
this option allows you to ignore the individual commits
brought in to your history by such a merge.
--not
Reverses the meaning of the ^ prefix (or lack thereof)
for all following revision specifiers, up to the next
--not.
--all
Pretend as if all the refs in refs/ are listed on the
command line as <commit>.
--branches[=<pattern>]
Pretend as if all the refs in refs/heads are listed on
the command line as <commit>. If <pattern> is given,
limit branches to ones matching given shell glob. If
pattern lacks ?, , or [, / at the end is implied.
--tags[=<pattern>]
Pretend as if all the refs in refs/tags are listed on
the command line as <commit>. If <pattern> is given,
limit tags to ones matching given shell glob. If pattern
lacks ?, , or [, / at the end is implied.
--remotes[=<pattern>]
Pretend as if all the refs in refs/remotes are listed on
the command line as <commit>. If <pattern> is given,
limit remote-tracking branches to ones matching given
Git 1.7.9.2 Last change: 02/22/2012 4
Git Manual GIT-REV-LIST(1)
shell glob. If pattern lacks ?, , or [, / at the end is
implied.
--glob=<glob-pattern>
Pretend as if all the refs matching shell glob
<glob-pattern> are listed on the command line as
<commit>. Leading refs/, is automatically prepended if
missing. If pattern lacks ?, , or [, / at the end is
implied.
--ignore-missing
Upon seeing an invalid object name in the input, pretend
as if the bad input was not given.
--stdin
In addition to the <commit> listed on the command line,
read them from the standard input. If a -- separator is
seen, stop reading commits and start reading paths to
limit the result.
--quiet
Don't print anything to standard output. This form is
primarily meant to allow the caller to test the exit
status to see if a range of objects is fully connected
(or not). It is faster than redirecting stdout to
/dev/null as the output does not have to be formatted.
--cherry-mark
Like --cherry-pick (see below) but mark equivalent
commits with = rather than omitting them, and
inequivalent ones with +.
--cherry-pick
Omit any commit that introduces the same change as
another commit on the "other side" when the set of
commits are limited with symmetric difference.
For example, if you have two branches, A and B, a usual
way to list all commits on only one side of them is with
--left-right (see the example below in the description
of the --left-right option). It however shows the
commits that were cherry-picked from the other branch
(for example, "3rd on b" may be cherry-picked from
branch A). With this option, such pairs of commits are
excluded from the output.
--left-only, --right-only
List only commits on the respective side of a symmetric
range, i.e. only those which would be marked < resp. >
by --left-right.
For example, --cherry-pick --right-only A...B omits
Git 1.7.9.2 Last change: 02/22/2012 5
Git Manual GIT-REV-LIST(1)
those commits from B which are in A or are
patch-equivalent to a commit in A. In other words, this
lists the + commits from git cherry A B. More precisely,
--cherry-pick --right-only --no-merges gives the exact
list.
--cherry
A synonym for --right-only --cherry-mark --no-merges;
useful to limit the output to the commits on our side
and mark those that have been applied to the other side
of a forked history with git log --cherry
upstream...mybranch, similar to git cherry upstream
mybranch.
-g, --walk-reflogs
Instead of walking the commit ancestry chain, walk
reflog entries from the most recent one to older ones.
When this option is used you cannot specify commits to
exclude (that is, ^commit, commit1..commit2, nor
commit1...commit2 notations cannot be used).
With --pretty format other than oneline (for obvious
reasons), this causes the output to have two extra lines
of information taken from the reflog. By default,
commit@{Nth} notation is used in the output. When the
starting commit is specified as commit@{now}, output
also uses commit@{timestamp} notation instead. Under
--pretty=oneline, the commit message is prefixed with
this information on the same line. This option cannot be
combined with --reverse. See also git-reflog(1).
--merge
After a failed merge, show refs that touch files having
a conflict and don't exist on all heads to merge.
--boundary
Output uninteresting commits at the boundary, which are
usually not shown.
History Simplification
Sometimes you are only interested in parts of the history,
for example the commits modifying a particular <path>. But
there are two parts of History Simplification, one part is
selecting the commits and the other is how to do it, as
there are various strategies to simplify the history.
The following options select the commits to be shown:
<paths>
Commits modifying the given <paths> are selected.
Git 1.7.9.2 Last change: 02/22/2012 6
Git Manual GIT-REV-LIST(1)
--simplify-by-decoration
Commits that are referred by some branch or tag are
selected.
Note that extra commits can be shown to give a meaningful
history.
The following options affect the way the simplification is
performed:
Default mode
Simplifies the history to the simplest history
explaining the final state of the tree. Simplest because
it prunes some side branches if the end result is the
same (i.e. merging branches with the same content)
--full-history
Same as the default mode, but does not prune some
history.
--dense
Only the selected commits are shown, plus some to have a
meaningful history.
--sparse
All commits in the simplified history are shown.
--simplify-merges
Additional option to --full-history to remove some
needless merges from the resulting history, as there are
no selected commits contributing to this merge.
--ancestry-path
When given a range of commits to display (e.g.
commit1..commit2 or commit2 ^commit1), only display
commits that exist directly on the ancestry chain
between the commit1 and commit2, i.e. commits that are
both descendants of commit1, and ancestors of commit2.
A more detailed explanation follows.
Suppose you specified foo as the <paths>. We shall call
commits that modify foo !TREESAME, and the rest TREESAME.
(In a diff filtered for foo, they look different and equal,
respectively.)
In the following, we will always refer to the same example
history to illustrate the differences between simplification
settings. We assume that you are filtering for a file foo in
this commit graph:
.-A---M---N---O---P
Git 1.7.9.2 Last change: 02/22/2012 7
Git Manual GIT-REV-LIST(1)
/ / / / /
I B C D E
\ / / / /
`-------------'
The horizontal line of history A---P is taken to be the
first parent of each merge. The commits are:
o I is the initial commit, in which foo exists with
contents "asdf", and a file quux exists with contents
"quux". Initial commits are compared to an empty tree,
so I is !TREESAME.
o In A, foo contains just "foo".
o B contains the same change as A. Its merge M is trivial
and hence TREESAME to all parents.
o C does not change foo, but its merge N changes it to
"foobar", so it is not TREESAME to any parent.
o D sets foo to "baz". Its merge O combines the strings
from N and D to "foobarbaz"; i.e., it is not TREESAME to
any parent.
o E changes quux to "xyzzy", and its merge P combines the
strings to "quux xyzzy". Despite appearing interesting,
P is TREESAME to all parents.
rev-list walks backwards through history, including or
excluding commits based on whether --full-history and/or
parent rewriting (via --parents or --children) are used. The
following settings are available.
Default mode
Commits are included if they are not TREESAME to any
parent (though this can be changed, see --sparse below).
If the commit was a merge, and it was TREESAME to one
parent, follow only that parent. (Even if there are
several TREESAME parents, follow only one of them.)
Otherwise, follow all parents.
This results in:
.-A---N---O
/ / /
I---------D
Note how the rule to only follow the TREESAME parent, if
one is available, removed B from consideration entirely.
C was considered via N, but is TREESAME. Root commits
Git 1.7.9.2 Last change: 02/22/2012 8
Git Manual GIT-REV-LIST(1)
are compared to an empty tree, so I is !TREESAME.
Parent/child relations are only visible with --parents,
but that does not affect the commits selected in default
mode, so we have shown the parent lines.
--full-history without parent rewriting
This mode differs from the default in one point: always
follow all parents of a merge, even if it is TREESAME to
one of them. Even if more than one side of the merge has
commits that are included, this does not imply that the
merge itself is! In the example, we get
I A B N D O
P and M were excluded because they are TREESAME to a
parent. E, C and B were all walked, but only B was
!TREESAME, so the others do not appear.
Note that without parent rewriting, it is not really
possible to talk about the parent/child relationships
between the commits, so we show them disconnected.
--full-history with parent rewriting
Ordinary commits are only included if they are !TREESAME
(though this can be changed, see --sparse below).
Merges are always included. However, their parent list
is rewritten: Along each parent, prune away commits that
are not included themselves. This results in
.-A---M---N---O---P
/ / / / /
I B / D /
\ / / / /
`-------------'
Compare to --full-history without rewriting above. Note
that E was pruned away because it is TREESAME, but the
parent list of P was rewritten to contain E's parent I.
The same happened for C and N. Note also that P was
included despite being TREESAME.
In addition to the above settings, you can change whether
TREESAME affects inclusion:
--dense
Commits that are walked are included if they are not
TREESAME to any parent.
--sparse
All commits that are walked are included.
Git 1.7.9.2 Last change: 02/22/2012 9
Git Manual GIT-REV-LIST(1)
Note that without --full-history, this still simplifies
merges: if one of the parents is TREESAME, we follow
only that one, so the other sides of the merge are never
walked.
--simplify-merges
First, build a history graph in the same way that
--full-history with parent rewriting does (see above).
Then simplify each commit `C` to its replacement C' in
the final history according to the following rules:
o Set `C'` to C.
o Replace each parent `P` of C' with its
simplification `P'`. In the process, drop parents
that are ancestors of other parents, and remove
duplicates.
o If after this parent rewriting, `C'` is a root or
merge commit (has zero or >1 parents), a boundary
commit, or !TREESAME, it remains. Otherwise, it is
replaced with its only parent.
The effect of this is best shown by way of comparing to
--full-history with parent rewriting. The example turns
into:
.-A---M---N---O
/ / /
I B D
\ / /
`---------'
Note the major differences in N and P over
--full-history:
o N's parent list had I removed, because it is an
ancestor of the other parent M. Still, N remained
because it is !TREESAME.
o P's parent list similarly had I removed. P was
then removed completely, because it had one parent
and is TREESAME.
Finally, there is a fifth simplification mode available:
--ancestry-path
Limit the displayed commits to those directly on the
ancestry chain between the "from" and "to" commits in
the given commit range. I.e. only display commits that
are ancestor of the "to" commit, and descendants of the
Git 1.7.9.2 Last change: 02/22/2012 10
Git Manual GIT-REV-LIST(1)
"from" commit.
As an example use case, consider the following commit
history:
D---E-------F
/ \ \
B---C---G---H---I---J
/ \
A-------K---------------L--M
A regular D..M computes the set of commits that are
ancestors of M, but excludes the ones that are ancestors
of D. This is useful to see what happened to the history
leading to M since D, in the sense that "what does M
have that did not exist in D". The result in this
example would be all the commits, except A and B (and D
itself, of course).
When we want to find out what commits in M are
contaminated with the bug introduced by D and need
fixing, however, we might want to view only the subset
of D..M that are actually descendants of D, i.e.
excluding C and K. This is exactly what the
--ancestry-path option does. Applied to the D..M range,
it results in:
E-------F
\ \
G---H---I---J
\
L--M
The --simplify-by-decoration option allows you to view only
the big picture of the topology of the history, by omitting
commits that are not referenced by tags. Commits are marked
as !TREESAME (in other words, kept after history
simplification rules described above) if (1) they are
referenced by tags, or (2) they change the contents of the
paths given on the command line. All other commits are
marked as TREESAME (subject to be simplified away).
Bisection Helpers
--bisect
Limit output to the one commit object which is roughly
halfway between included and excluded commits. Note that
the bad bisection ref refs/bisect/bad is added to the
included commits (if it exists) and the good bisection
refs refs/bisect/good-* are added to the excluded
commits (if they exist). Thus, supposing there are no
refs in refs/bisect/, if
Git 1.7.9.2 Last change: 02/22/2012 11
Git Manual GIT-REV-LIST(1)
$ git rev-list --bisect foo ^bar ^baz
outputs midpoint, the output of the two commands
$ git rev-list foo ^midpoint
$ git rev-list midpoint ^bar ^baz
would be of roughly the same length. Finding the change
which introduces a regression is thus reduced to a binary
search: repeatedly generate and test new 'midpoint's until
the commit chain is of length one.
--bisect-vars
This calculates the same as --bisect, except that refs
in refs/bisect/ are not used, and except that this
outputs text ready to be eval'ed by the shell. These
lines will assign the name of the midpoint revision to
the variable bisect_rev, and the expected number of
commits to be tested after bisect_rev is tested to
bisect_nr, the expected number of commits to be tested
if bisect_rev turns out to be good to bisect_good, the
expected number of commits to be tested if bisect_rev
turns out to be bad to bisect_bad, and the number of
commits we are bisecting right now to bisect_all.
--bisect-all
This outputs all the commit objects between the included
and excluded commits, ordered by their distance to the
included and excluded commits. Refs in refs/bisect/ are
not used. The farthest from them is displayed first.
(This is the only one displayed by --bisect.)
This is useful because it makes it easy to choose a good
commit to test when you want to avoid to test some of
them for some reason (they may not compile for example).
This option can be used along with --bisect-vars, in
this case, after all the sorted commit objects, there
will be the same text as if --bisect-vars had been used
alone.
Commit Ordering
By default, the commits are shown in reverse chronological
order.
--topo-order
This option makes them appear in topological order (i.e.
descendant commits are shown before their parents).
Git 1.7.9.2 Last change: 02/22/2012 12
Git Manual GIT-REV-LIST(1)
--date-order
This option is similar to --topo-order in the sense that
no parent comes before all of its children, but
otherwise things are still ordered in the commit
timestamp order.
--reverse
Output the commits in reverse order. Cannot be combined
with --walk-reflogs.
Object Traversal
These options are mostly targeted for packing of git
repositories.
--objects
Print the object IDs of any object referenced by the
listed commits. --objects foo ^bar thus means "send me
all object IDs which I need to download if I have the
commit object bar, but not foo".
--objects-edge
Similar to --objects, but also print the IDs of excluded
commits prefixed with a "-" character. This is used by
git-pack-objects(1) to build "thin" pack, which records
objects in deltified form based on objects contained in
these excluded commits to reduce network traffic.
--unpacked
Only useful with --objects; print the object IDs that
are not in packs.
--no-walk
Only show the given revs, but do not traverse their
ancestors.
--do-walk
Overrides a previous --no-walk.
Commit Formatting
Using these options, git-rev-list(1) will act similar to the
more specialized family of commit log tools: git-log(1),
git-show(1), and git-whatchanged(1)
--pretty[=<format>], --format=<format>
Pretty-print the contents of the commit logs in a given
format, where <format> can be one of oneline, short,
medium, full, fuller, email, raw and format:<string>.
See the "PRETTY FORMATS" section for some additional
details for each format. When omitted, the format
defaults to medium.
Note: you can specify the default pretty format in the
Git 1.7.9.2 Last change: 02/22/2012 13
Git Manual GIT-REV-LIST(1)
repository configuration (see git-config(1)).
--abbrev-commit
Instead of showing the full 40-byte hexadecimal commit
object name, show only a partial prefix. Non default
number of digits can be specified with "--abbrev=<n>"
(which also modifies diff output, if it is displayed).
This should make "--pretty=oneline" a whole lot more
readable for people using 80-column terminals.
--no-abbrev-commit
Show the full 40-byte hexadecimal commit object name.
This negates --abbrev-commit and those options which
imply it such as "--oneline". It also overrides the
log.abbrevCommit variable.
--oneline
This is a shorthand for "--pretty=oneline
--abbrev-commit" used together.
--encoding[=<encoding>]
The commit objects record the encoding used for the log
message in their encoding header; this option can be
used to tell the command to re-code the commit log
message in the encoding preferred by the user. For non
plumbing commands this defaults to UTF-8.
--notes[=<ref>]
Show the notes (see git-notes(1)) that annotate the
commit, when showing the commit log message. This is the
default for git log, git show and git whatchanged
commands when there is no --pretty, --format nor
--oneline option given on the command line.
By default, the notes shown are from the notes refs
listed in the core.notesRef and notes.displayRef
variables (or corresponding environment overrides). See
git-config(1) for more details.
With an optional <ref> argument, show this notes ref
instead of the default notes ref(s). The ref is taken to
be in refs/notes/ if it is not qualified.
Multiple --notes options can be combined to control
which notes are being displayed. Examples: "--notes=foo"
will show only notes from "refs/notes/foo"; "--notes=foo
--notes" will show both notes from "refs/notes/foo" and
from the default notes ref(s).
--no-notes
Do not show notes. This negates the above --notes
Git 1.7.9.2 Last change: 02/22/2012 14
Git Manual GIT-REV-LIST(1)
option, by resetting the list of notes refs from which
notes are shown. Options are parsed in the order given
on the command line, so e.g. "--notes --notes=foo
--no-notes --notes=bar" will only show notes from
"refs/notes/bar".
--show-notes[=<ref>], --[no-]standard-notes
These options are deprecated. Use the above
--notes/--no-notes options instead.
--relative-date
Synonym for --date=relative.
--date=(relative|local|default|iso|rfc|short|raw)
Only takes effect for dates shown in human-readable
format, such as when using "--pretty". log.date config
variable sets a default value for log command's --date
option.
--date=relative shows dates relative to the current
time, e.g. "2 hours ago".
--date=local shows timestamps in user's local timezone.
--date=iso (or --date=iso8601) shows timestamps in ISO
8601 format.
--date=rfc (or --date=rfc2822) shows timestamps in RFC
2822 format, often found in E-mail messages.
--date=short shows only date but not time, in YYYY-MM-DD
format.
--date=raw shows the date in the internal raw git format
%s %z format.
--date=default shows timestamps in the original timezone
(either committer's or author's).
--header
Print the contents of the commit in raw-format; each
record is separated with a NUL character.
--parents
Print also the parents of the commit (in the form
"commit parent..."). Also enables parent rewriting, see
History Simplification below.
--children
Print also the children of the commit (in the form
"commit child..."). Also enables parent rewriting, see
History Simplification below.
Git 1.7.9.2 Last change: 02/22/2012 15
Git Manual GIT-REV-LIST(1)
--timestamp
Print the raw commit timestamp.
--left-right
Mark which side of a symmetric diff a commit is
reachable from. Commits from the left side are prefixed
with < and those from the right with >. If combined with
--boundary, those commits are prefixed with -.
For example, if you have this topology:
y---b---b branch B
/ \ /
/ .
/ / \
o---x---a---a branch A
you would get an output like this:
$ git rev-list --left-right --boundary --pretty=oneline A...B
>bbbbbbb... 3rd on b
>bbbbbbb... 2nd on b
<aaaaaaa... 3rd on a
<aaaaaaa... 2nd on a
-yyyyyyy... 1st on b
-xxxxxxx... 1st on a
--graph
Draw a text-based graphical representation of the commit
history on the left hand side of the output. This may
cause extra lines to be printed in between commits, in
order for the graph history to be drawn properly.
This enables parent rewriting, see History
Simplification below.
This implies the --topo-order option by default, but the
--date-order option may also be specified.
--count
Print a number stating how many commits would have been
listed, and suppress all other output. When used
together with --left-right, instead print the counts for
left and right commits, separated by a tab. When used
together with --cherry-mark, omit patch equivalent
commits from these counts and print the count for
equivalent commits separated by a tab.
PRETTY FORMATS
If the commit is a merge, and if the pretty-format is not
Git 1.7.9.2 Last change: 02/22/2012 16
Git Manual GIT-REV-LIST(1)
oneline, email or raw, an additional line is inserted before
the Author: line. This line begins with "Merge: " and the
sha1s of ancestral commits are printed, separated by spaces.
Note that the listed commits may not necessarily be the list
of the direct parent commits if you have limited your view
of history: for example, if you are only interested in
changes related to a certain directory or file.
There are several built-in formats, and you can define
additional formats by setting a pretty.<name> config option
to either another format name, or a format: string, as
described below (see git-config(1)). Here are the details of
the built-in formats:
o oneline
<sha1> <title line>
This is designed to be as compact as possible.
o short
commit <sha1>
Author: <author>
<title line>
o medium
commit <sha1>
Author: <author>
Date: <author date>
<title line>
<full commit message>
o full
commit <sha1>
Author: <author>
Commit: <committer>
<title line>
<full commit message>
o fuller
commit <sha1>
Author: <author>
AuthorDate: <author date>
Git 1.7.9.2 Last change: 02/22/2012 17
Git Manual GIT-REV-LIST(1)
Commit: <committer>
CommitDate: <committer date>
<title line>
<full commit message>
o email
From <sha1> <date>
From: <author>
Date: <author date>
Subject: [PATCH] <title line>
<full commit message>
o raw
The raw format shows the entire commit exactly as stored
in the commit object. Notably, the SHA1s are displayed
in full, regardless of whether --abbrev or --no-abbrev
are used, and parents information show the true parent
commits, without taking grafts nor history
simplification into account.
o format:<string>
The format:<string> format allows you to specify which
information you want to show. It works a little bit like
printf format, with the notable exception that you get a
newline with %n instead of \n.
E.g, format:"The author of %h was %an, %ar%nThe title
was >>%s<<%n" would show something like this:
The author of fe6e0ee was Junio C Hamano, 23 hours ago
The title was >>t4119: test autocomputing -p<n> for traditional diff input.<<
The placeholders are:
o %H: commit hash
o %h: abbreviated commit hash
o %T: tree hash
o %t: abbreviated tree hash
o %P: parent hashes
o %p: abbreviated parent hashes
Git 1.7.9.2 Last change: 02/22/2012 18
Git Manual GIT-REV-LIST(1)
o %an: author name
o %aN: author name (respecting .mailmap, see git-
shortlog(1) or git-blame(1))
o %ae: author email
o %aE: author email (respecting .mailmap, see git-
shortlog(1) or git-blame(1))
o %ad: author date (format respects --date= option)
o %aD: author date, RFC2822 style
o %ar: author date, relative
o %at: author date, UNIX timestamp
o %ai: author date, ISO 8601 format
o %cn: committer name
o %cN: committer name (respecting .mailmap, see git-
shortlog(1) or git-blame(1))
o %ce: committer email
o %cE: committer email (respecting .mailmap, see git-
shortlog(1) or git-blame(1))
o %cd: committer date
o %cD: committer date, RFC2822 style
o %cr: committer date, relative
o %ct: committer date, UNIX timestamp
o %ci: committer date, ISO 8601 format
o %d: ref names, like the --decorate option of git-
log(1)
o %e: encoding
o %s: subject
o %f: sanitized subject line, suitable for a filename
o %b: body
o %B: raw body (unwrapped subject and body)
Git 1.7.9.2 Last change: 02/22/2012 19
Git Manual GIT-REV-LIST(1)
o %N: commit notes
o %gD: reflog selector, e.g., refs/stash@{1}
o %gd: shortened reflog selector, e.g., stash@{1}
o %gn: reflog identity name
o %gN: reflog identity name (respecting .mailmap, see
git-shortlog(1) or git-blame(1))
o %ge: reflog identity email
o %gE: reflog identity email (respecting .mailmap,
see git-shortlog(1) or git-blame(1))
o %gs: reflog subject
o %Cred: switch color to red
o %Cgreen: switch color to green
o %Cblue: switch color to blue
o %Creset: reset color
o %C(...): color specification, as described in
color.branch.* config option
o %m: left, right or boundary mark
o %n: newline
o %%: a raw %
o %x00: print a byte from a hex code
o %w([<w>[,<i1>[,<i2>]]]): switch line wrapping, like
the -w option of git-shortlog(1).
Note
Some placeholders may depend on other options given to
the revision traversal engine. For example, the %g*
reflog options will insert an empty string unless we are
traversing reflog entries (e.g., by git log -g). The %d
placeholder will use the "short" decoration format if
--decorate was not already provided on the command line.
If you add a + (plus sign) after % of a placeholder, a
line-feed is inserted immediately before the expansion if
and only if the placeholder expands to a non-empty string.
Git 1.7.9.2 Last change: 02/22/2012 20
Git Manual GIT-REV-LIST(1)
If you add a - (minus sign) after % of a placeholder,
line-feeds that immediately precede the expansion are
deleted if and only if the placeholder expands to an empty
string.
If you add a ` ` (space) after % of a placeholder, a space
is inserted immediately before the expansion if and only if
the placeholder expands to a non-empty string.
o tformat:
The tformat: format works exactly like format:, except
that it provides "terminator" semantics instead of
"separator" semantics. In other words, each commit has
the message terminator character (usually a newline)
appended, rather than a separator placed between
entries. This means that the final entry of a
single-line format will be properly terminated with a
new line, just as the "oneline" format does. For
example:
$ git log -2 --pretty=format:%h 4da45bef \
| perl -pe '$_ .= " -- NO NEWLINE\n" unless /\n/'
4da45be
7134973 -- NO NEWLINE
$ git log -2 --pretty=tformat:%h 4da45bef \
| perl -pe '$_ .= " -- NO NEWLINE\n" unless /\n/'
4da45be
7134973
In addition, any unrecognized string that has a % in it
is interpreted as if it has tformat: in front of it. For
example, these two are equivalent:
$ git log -2 --pretty=tformat:%h 4da45bef
$ git log -2 --pretty=%h 4da45bef
GIT
Part of the git(1) suite
ATTRIBUTES
See attributes(5) for descriptions of the following
attributes:
Git 1.7.9.2 Last change: 02/22/2012 21
Git Manual GIT-REV-LIST(1)
+---------------+--------------------------+
|ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+---------------+--------------------------+
|Availability | developer/versioning/git |
+---------------+--------------------------+
|Stability | Uncommitted |
+---------------+--------------------------+
NOTES
This software was built from source available at
https://java.net/projects/solaris-userland. The original
community source was downloaded from http://git-
core.googlecode.com/files/git-1.7.9.2.tar.gz
Further information about this software can be found on the
open source community website at http://git-scm.com/.
Git 1.7.9.2 Last change: 02/22/2012 22