stty
(1g)
名前
stty - change and print terminal line settings
形式
stty [-F DEVICE | --file=DEVICE] [SETTING]...
stty [-F DEVICE | --file=DEVICE] [-a|--all]
stty [-F DEVICE | --file=DEVICE] [-g|--save]
説明
User Commands STTY(1)
NAME
stty - change and print terminal line settings
SYNOPSIS
stty [-F DEVICE | --file=DEVICE] [SETTING]...
stty [-F DEVICE | --file=DEVICE] [-a|--all]
stty [-F DEVICE | --file=DEVICE] [-g|--save]
DESCRIPTION
Print or change terminal characteristics.
-a, --all
print all current settings in human-readable form
-g, --save
print all current settings in a stty-readable form
-F, --file=DEVICE
open and use the specified DEVICE instead of stdin
--help
display this help and exit
--version
output version information and exit
Optional - before SETTING indicates negation. An * marks
non-POSIX settings. The underlying system defines which
settings are available.
Special characters:
* dsusp CHAR
CHAR will send a terminal stop signal once input
flushed
eof CHAR
CHAR will send an end of file (terminate the input)
eol CHAR
CHAR will end the line
* eol2 CHAR
alternate CHAR for ending the line
erase CHAR
CHAR will erase the last character typed
intr CHAR
CHAR will send an interrupt signal
kill CHAR
CHAR will erase the current line
GNU coreutils 8.16 Last change: March 2012 1
User Commands STTY(1)
* lnext CHAR
CHAR will enter the next character quoted
quit CHAR
CHAR will send a quit signal
* rprnt CHAR
CHAR will redraw the current line
start CHAR
CHAR will restart the output after stopping it
stop CHAR
CHAR will stop the output
susp CHAR
CHAR will send a terminal stop signal
* swtch CHAR
CHAR will switch to a different shell layer
* werase CHAR
CHAR will erase the last word typed
Special settings:
N set the input and output speeds to N bauds
* cols N
tell the kernel that the terminal has N columns
* columns N
same as cols N
ispeed N
set the input speed to N
* line N
use line discipline N
min N
with -icanon, set N characters minimum for a completed
read
ospeed N
set the output speed to N
* rows N
tell the kernel that the terminal has N rows
* size
print the number of rows and columns according to the
kernel
GNU coreutils 8.16 Last change: March 2012 2
User Commands STTY(1)
speed
print the terminal speed
time N
with -icanon, set read timeout of N tenths of a second
Control settings:
[-]clocal
disable modem control signals
[-]cread
allow input to be received
* [-]crtscts
enable RTS/CTS handshaking
csN set character size to N bits, N in [5..8]
[-]cstopb
use two stop bits per character (one with '-')
[-]hup
send a hangup signal when the last process closes the
tty
[-]hupcl
same as [-]hup
[-]parenb
generate parity bit in output and expect parity bit in
input
[-]parodd
set odd parity (even with '-')
Input settings:
[-]brkint
breaks cause an interrupt signal
[-]icrnl
translate carriage return to newline
[-]ignbrk
ignore break characters
[-]igncr
ignore carriage return
[-]ignpar
ignore characters with parity errors
* [-]imaxbel
GNU coreutils 8.16 Last change: March 2012 3
User Commands STTY(1)
beep and do not flush a full input buffer on a charac-
ter
[-]inlcr
translate newline to carriage return
[-]inpck
enable input parity checking
[-]istrip
clear high (8th) bit of input characters
* [-]iutf8
assume input characters are UTF-8 encoded
* [-]iuclc
translate uppercase characters to lowercase
* [-]ixany
let any character restart output, not only start char-
acter
[-]ixoff
enable sending of start/stop characters
[-]ixon
enable XON/XOFF flow control
[-]parmrk
mark parity errors (with a 255-0-character sequence)
[-]tandem
same as [-]ixoff
Output settings:
* bsN
backspace delay style, N in [0..1]
* crN
carriage return delay style, N in [0..3]
* ffN
form feed delay style, N in [0..1]
* nlN
newline delay style, N in [0..1]
* [-]ocrnl
translate carriage return to newline
* [-]ofdel
use delete characters for fill instead of null
GNU coreutils 8.16 Last change: March 2012 4
User Commands STTY(1)
characters
* [-]ofill
use fill (padding) characters instead of timing for
delays
* [-]olcuc
translate lowercase characters to uppercase
* [-]onlcr
translate newline to carriage return-newline
* [-]onlret
newline performs a carriage return
* [-]onocr
do not print carriage returns in the first column
[-]opost
postprocess output
* tabN
horizontal tab delay style, N in [0..3]
* tabs
same as tab0
* -tabs
same as tab3
* vtN
vertical tab delay style, N in [0..1]
Local settings:
[-]crterase
echo erase characters as backspace-space-backspace
* crtkill
kill all line by obeying the echoprt and echoe settings
* -crtkill
kill all line by obeying the echoctl and echok settings
* [-]ctlecho
echo control characters in hat notation ('^c')
[-]echo
echo input characters
* [-]echoctl
same as [-]ctlecho
GNU coreutils 8.16 Last change: March 2012 5
User Commands STTY(1)
[-]echoe
same as [-]crterase
[-]echok
echo a newline after a kill character
* [-]echoke
same as [-]crtkill
[-]echonl
echo newline even if not echoing other characters
* [-]echoprt
echo erased characters backward, between '\' and '/'
[-]icanon
enable erase, kill, werase, and rprnt special charac-
ters
[-]iexten
enable non-POSIX special characters
[-]isig
enable interrupt, quit, and suspend special characters
[-]noflsh
disable flushing after interrupt and quit special char-
acters
* [-]prterase
same as [-]echoprt
* [-]tostop
stop background jobs that try to write to the terminal
* [-]xcase
with icanon, escape with '\' for uppercase characters
Combination settings:
* [-]LCASE
same as [-]lcase
cbreak
same as -icanon
-cbreak
same as icanon
cooked
same as brkint ignpar istrip icrnl ixon opost isig
icanon, eof and eol characters to their default values
GNU coreutils 8.16 Last change: March 2012 6
User Commands STTY(1)
-cooked
same as raw
crt same as echoe echoctl echoke
dec same as echoe echoctl echoke -ixany intr ^c erase 0177
kill ^u
* [-]decctlq
same as [-]ixany
ek erase and kill characters to their default values
evenp
same as parenb -parodd cs7
-evenp
same as -parenb cs8
* [-]lcase
same as xcase iuclc olcuc
litout
same as -parenb -istrip -opost cs8
-litout
same as parenb istrip opost cs7
nl same as -icrnl -onlcr
-nl same as icrnl -inlcr -igncr onlcr -ocrnl -onlret
oddp same as parenb parodd cs7
-oddp
same as -parenb cs8
[-]parity
same as [-]evenp
pass8
same as -parenb -istrip cs8
-pass8
same as parenb istrip cs7
raw same as -ignbrk -brkint -ignpar -parmrk -inpck -istrip
-inlcr -igncr -icrnl -ixon -ixoff -iuclc -ixany
-imaxbel -opost -isig -icanon -xcase min 1 time 0
-raw same as cooked
GNU coreutils 8.16 Last change: March 2012 7
User Commands STTY(1)
sane same as cread -ignbrk brkint -inlcr -igncr icrnl -iutf8
-ixoff -iuclc -ixany imaxbel opost -olcuc -ocrnl onlcr
-onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0
isig icanon iexten echo echoe echok -echonl -noflsh
-xcase -tostop -echoprt echoctl echoke, all special
characters to their default values
Handle the tty line connected to standard input. Without
arguments, prints baud rate, line discipline, and deviations
from stty sane. In settings, CHAR is taken literally, or
coded as in ^c, 0x37, 0177 or 127; special values ^- or
undef used to disable special characters.
AUTHOR
Written by David MacKenzie.
REPORTING BUGS
Report stty bugs to bug-coreutils@gnu.org
GNU coreutils home page: <http://www.gnu.org/software/core-
utils/>
General help using GNU software: <http://www.gnu.org/geth-
elp/>
Report stty translation bugs to <http://translationpro-
ject.org/team/>
COPYRIGHT
Copyright (C) 2012 Free Software Foundation, Inc. License
GPLv3+: GNU GPL version 3 or later
<http://gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redis-
tribute it. There is NO WARRANTY, to the extent permitted
by law.
ATTRIBUTES
See attributes(5) for descriptions of the following
attributes:
+---------------+--------------------+
|ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+---------------+--------------------+
|Availability | file/gnu-coreutils |
+---------------+--------------------+
|Stability | Uncommitted |
+---------------+--------------------+
SEE ALSO
The full documentation for stty is maintained as a Texinfo
manual. If the info and stty programs are properly
installed at your site, the command
info coreutils 'stty invocation'
GNU coreutils 8.16 Last change: March 2012 8
User Commands STTY(1)
should give you access to the complete manual.
NOTES
This software was built from source available at
https://java.net/projects/solaris-userland. The original
community source was downloaded from
http://ftp.gnu.org/gnu/coreutils/coreutils-8.16.tar.xz
Further information about this software can be found on the
open source community website at http://www.gnu.org/soft-
ware/coreutils/.
GNU coreutils 8.16 Last change: March 2012 9