perl5004delta
(1)
名前
perl5004delta - what's new for perl5.004
形式
Please see following description for synopsis
説明
Perl Programmers Reference Guide PERL5004DELTA(1)
NAME
perl5004delta - what's new for perl5.004
DESCRIPTION
This document describes differences between the 5.003
release (as documented in Programming Perl, second
edition--the Camel Book) and this one.
Supported Environments
Perl5.004 builds out of the box on Unix, Plan 9, LynxOS,
VMS, OS/2, QNX, AmigaOS, and Windows NT. Perl runs on
Windows 95 as well, but it cannot be built there, for lack
of a reasonable command interpreter.
Core Changes
Most importantly, many bugs were fixed, including several
security problems. See the Changes file in the distribution
for details.
List assignment to %ENV works
"%ENV = ()" and "%ENV = @list" now work as expected (except
on VMS where it generates a fatal error).
Change to "Can't locate Foo.pm in @INC" error
The error "Can't locate Foo.pm in @INC" now lists the
contents of @INC for easier debugging.
Compilation option: Binary compatibility with 5.003
There is a new Configure question that asks if you want to
maintain binary compatibility with Perl 5.003. If you
choose binary compatibility, you do not have to recompile
your extensions, but you might have symbol conflicts if you
embed Perl in another application, just as in the 5.003
release. By default, binary compatibility is preserved at
the expense of symbol table pollution.
$PERL5OPT environment variable
You may now put Perl options in the $PERL5OPT environment
variable. Unless Perl is running with taint checks, it will
interpret this variable as if its contents had appeared on a
"#!perl" line at the beginning of your script, except that
hyphens are optional. PERL5OPT may only be used to set the
following switches: -[DIMUdmw].
Limitations on -M, -m, and -T options
The "-M" and "-m" options are no longer allowed on the "#!"
line of a script. If a script needs a module, it should
invoke it with the "use" pragma.
The -T option is also forbidden on the "#!" line of a
script, unless it was present on the Perl command line. Due
to the way "#!" works, this usually means that -T must be
perl v5.12.5 Last change: 2012-11-03 1
Perl Programmers Reference Guide PERL5004DELTA(1)
in the first argument. Thus:
#!/usr/bin/perl -T -w
will probably work for an executable script invoked as
"scriptname", while:
#!/usr/bin/perl -w -T
will probably fail under the same conditions. (Non-Unix
systems will probably not follow this rule.) But "perl
scriptname" is guaranteed to fail, since then there is no
chance of -T being found on the command line before it is
found on the "#!" line.
More precise warnings
If you removed the -w option from your Perl 5.003 scripts
because it made Perl too verbose, we recommend that you try
putting it back when you upgrade to Perl 5.004. Each new
perl version tends to remove some undesirable warnings,
while adding new warnings that may catch bugs in your
scripts.
Deprecated: Inherited "AUTOLOAD" for non-methods
Before Perl 5.004, "AUTOLOAD" functions were looked up as
methods (using the @ISA hierarchy), even when the function
to be autoloaded was called as a plain function (e.g.
"Foo::bar()"), not a method (e.g. "Foo->bar()" or
"$obj->bar()").
Perl 5.005 will use method lookup only for methods'
"AUTOLOAD"s. However, there is a significant base of
existing code that may be using the old behavior. So, as an
interim step, Perl 5.004 issues an optional warning when a
non-method uses an inherited "AUTOLOAD".
The simple rule is: Inheritance will not work when
autoloading non-methods. The simple fix for old code is:
In any module that used to depend on inheriting "AUTOLOAD"
for non-methods from a base class named "BaseClass", execute
"*AUTOLOAD = \&BaseClass::AUTOLOAD" during startup.
Previously deprecated %OVERLOAD is no longer usable
Using %OVERLOAD to define overloading was deprecated in
5.003. Overloading is now defined using the overload
pragma. %OVERLOAD is still used internally but should not be
used by Perl scripts. See overload for more details.
Subroutine arguments created only when they're modified
In Perl 5.004, nonexistent array and hash elements used as
subroutine parameters are brought into existence only if
they are actually assigned to (via @_).
perl v5.12.5 Last change: 2012-11-03 2
Perl Programmers Reference Guide PERL5004DELTA(1)
Earlier versions of Perl vary in their handling of such
arguments. Perl versions 5.002 and 5.003 always brought
them into existence. Perl versions 5.000 and 5.001 brought
them into existence only if they were not the first argument
(which was almost certainly a bug). Earlier versions of
Perl never brought them into existence.
For example, given this code:
undef @a; undef %a;
sub show { print $_[0] };
sub change { $_[0]++ };
show($a[2]);
change($a{b});
After this code executes in Perl 5.004, $a{b} exists but
$a[2] does not. In Perl 5.002 and 5.003, both $a{b} and
$a[2] would have existed (but $a[2]'s value would have been
undefined).
Group vector changeable with $)
The $) special variable has always (well, in Perl 5, at
least) reflected not only the current effective group, but
also the group list as returned by the "getgroups()" C
function (if there is one). However, until this release,
there has not been a way to call the "setgroups()" C
function from Perl.
In Perl 5.004, assigning to $) is exactly symmetrical with
examining it: The first number in its string value is used
as the effective gid; if there are any numbers after the
first one, they are passed to the "setgroups()" C function
(if there is one).
Fixed parsing of $$<digit>, &$<digit>, etc.
Perl versions before 5.004 misinterpreted any type marker
followed by "$" and a digit. For example, "$$0" was
incorrectly taken to mean "${$}0" instead of "${$0}". This
bug is (mostly) fixed in Perl 5.004.
However, the developers of Perl 5.004 could not fix this bug
completely, because at least two widely-used modules depend
on the old meaning of "$$0" in a string. So Perl 5.004
still interprets "$$<digit>" in the old (broken) way inside
strings; but it generates this message as a warning. And in
Perl 5.005, this special treatment will cease.
Fixed localization of $<digit>, $&, etc.
Perl versions before 5.004 did not always properly localize
the regex-related special variables. Perl 5.004 does
localize them, as the documentation has always said it
should. This may result in $1, $2, etc. no longer being set
perl v5.12.5 Last change: 2012-11-03 3
Perl Programmers Reference Guide PERL5004DELTA(1)
where existing programs use them.
No resetting of $. on implicit close
The documentation for Perl 5.0 has always stated that $. is
not reset when an already-open file handle is reopened with
no intervening call to "close". Due to a bug, perl versions
5.000 through 5.003 did reset $. under that circumstance;
Perl 5.004 does not.
"wantarray" may return undef
The "wantarray" operator returns true if a subroutine is
expected to return a list, and false otherwise. In Perl
5.004, "wantarray" can also return the undefined value if a
subroutine's return value will not be used at all, which
allows subroutines to avoid a time-consuming calculation of
a return value if it isn't going to be used.
"eval EXPR" determines value of EXPR in scalar context
Perl (version 5) used to determine the value of EXPR
inconsistently, sometimes incorrectly using the surrounding
context for the determination. Now, the value of EXPR
(before being parsed by eval) is always determined in a
scalar context. Once parsed, it is executed as before, by
providing the context that the scope surrounding the eval
provided. This change makes the behavior Perl4 compatible,
besides fixing bugs resulting from the inconsistent
behavior. This program:
@a = qw(time now is time);
print eval @a;
print '|', scalar eval @a;
used to print something like "timenowis881399109|4", but now
(and in perl4) prints "4|4".
Changes to tainting checks
A bug in previous versions may have failed to detect some
insecure conditions when taint checks are turned on. (Taint
checks are used in setuid or setgid scripts, or when
explicitly turned on with the "-T" invocation option.)
Although it's unlikely, this may cause a previously-working
script to now fail, which should be construed as a blessing
since that indicates a potentially-serious security hole was
just plugged.
The new restrictions when tainting include:
No glob() or <*>
These operators may spawn the C shell (csh), which
cannot be made safe. This restriction will be lifted in
a future version of Perl when globbing is implemented
without the use of an external program.
perl v5.12.5 Last change: 2012-11-03 4
Perl Programmers Reference Guide PERL5004DELTA(1)
No spawning if tainted $CDPATH, $ENV, $BASH_ENV
These environment variables may alter the behavior of
spawned programs (especially shells) in ways that
subvert security. So now they are treated as dangerous,
in the manner of $IFS and $PATH.
No spawning if tainted $TERM doesn't look like a terminal
name
Some termcap libraries do unsafe things with $TERM.
However, it would be unnecessarily harsh to treat all
$TERM values as unsafe, since only shell metacharacters
can cause trouble in $TERM. So a tainted $TERM is
considered to be safe if it contains only alphanumerics,
underscores, dashes, and colons, and unsafe if it
contains other characters (including whitespace).
New Opcode module and revised Safe module
A new Opcode module supports the creation, manipulation and
application of opcode masks. The revised Safe module has a
new API and is implemented using the new Opcode module.
Please read the new Opcode and Safe documentation.
Embedding improvements
In older versions of Perl it was not possible to create more
than one Perl interpreter instance inside a single process
without leaking like a sieve and/or crashing. The bugs that
caused this behavior have all been fixed. However, you
still must take care when embedding Perl in a C program.
See the updated perlembed manpage for tips on how to manage
your interpreters.
Internal change: FileHandle class based on IO::* classes
File handles are now stored internally as type IO::Handle.
The FileHandle module is still supported for backwards
compatibility, but it is now merely a front end to the IO::*
modules, specifically IO::Handle, IO::Seekable, and
IO::File. We suggest, but do not require, that you use the
IO::* modules in new code.
In harmony with this change, *GLOB{FILEHANDLE} is now just a
backward-compatible synonym for *GLOB{IO}.
Internal change: PerlIO abstraction interface
It is now possible to build Perl with AT&T's sfio IO package
instead of stdio. See perlapio for more details, and the
INSTALL file for how to use it.
New and changed syntax
$coderef->(PARAMS)
A subroutine reference may now be suffixed with an arrow
and a (possibly empty) parameter list. This syntax
denotes a call of the referenced subroutine, with the
perl v5.12.5 Last change: 2012-11-03 5
Perl Programmers Reference Guide PERL5004DELTA(1)
given parameters (if any).
This new syntax follows the pattern of "$hashref->{FOO}"
and "$aryref->[$foo]": You may now write
"&$subref($foo)" as "$subref->($foo)". All these arrow
terms may be chained; thus, "&{$table->{FOO}}($bar)" may
now be written "$table->{FOO}->($bar)".
New and changed builtin constants
__PACKAGE__
The current package name at compile time, or the
undefined value if there is no current package (due to a
"package;" directive). Like "__FILE__" and "__LINE__",
"__PACKAGE__" does not interpolate into strings.
New and changed builtin variables
$^E Extended error message on some platforms. (Also known
as $EXTENDED_OS_ERROR if you "use English").
$^H The current set of syntax checks enabled by "use
strict". See the documentation of "strict" for more
details. Not actually new, but newly documented.
Because it is intended for internal use by Perl core
components, there is no "use English" long name for this
variable.
$^M By default, running out of memory it is not trappable.
However, if compiled for this, Perl may use the contents
of $^M as an emergency pool after die()ing with this
message. Suppose that your Perl were compiled with
-DPERL_EMERGENCY_SBRK and used Perl's malloc. Then
$^M = 'a' x (1<<16);
would allocate a 64K buffer for use when in emergency.
See the INSTALL file for information on how to enable
this option. As a disincentive to casual use of this
advanced feature, there is no "use English" long name
for this variable.
New and changed builtin functions
delete on slices
This now works. (e.g. "delete @ENV{'PATH', 'MANPATH'}")
flock
is now supported on more platforms, prefers fcntl to
lockf when emulating, and always flushes before
(un)locking.
printf and sprintf
Perl now implements these functions itself; it doesn't
use the C library function sprintf() any more, except
perl v5.12.5 Last change: 2012-11-03 6
Perl Programmers Reference Guide PERL5004DELTA(1)
for floating-point numbers, and even then only known
flags are allowed. As a result, it is now possible to
know which conversions and flags will work, and what
they will do.
The new conversions in Perl's sprintf() are:
%i a synonym for %d
%p a pointer (the address of the Perl value, in hexadecimal)
%n special: *stores* the number of characters output so far
into the next variable in the parameter list
The new flags that go between the "%" and the conversion
are:
# prefix octal with "0", hex with "0x"
h interpret integer as C type "short" or "unsigned short"
V interpret integer as Perl's standard integer type
Also, where a number would appear in the flags, an
asterisk ("*") may be used instead, in which case Perl
uses the next item in the parameter list as the given
number (that is, as the field width or precision). If a
field width obtained through "*" is negative, it has the
same effect as the '-' flag: left-justification.
See "sprintf" in perlfunc for a complete list of
conversion and flags.
keys as an lvalue
As an lvalue, "keys" allows you to increase the number
of hash buckets allocated for the given hash. This can
gain you a measure of efficiency if you know the hash is
going to get big. (This is similar to pre-extending an
array by assigning a larger number to $#array.) If you
say
keys %hash = 200;
then %hash will have at least 200 buckets allocated for
it. These buckets will be retained even if you do
"%hash = ()"; use "undef %hash" if you want to free the
storage while %hash is still in scope. You can't shrink
the number of buckets allocated for the hash using
"keys" in this way (but you needn't worry about doing
this by accident, as trying has no effect).
my() in Control Structures
You can now use my() (with or without the parentheses)
in the control expressions of control structures such
as:
perl v5.12.5 Last change: 2012-11-03 7
Perl Programmers Reference Guide PERL5004DELTA(1)
while (defined(my $line = <>)) {
$line = lc $line;
} continue {
print $line;
}
if ((my $answer = <STDIN>) =~ /^y(es)?$/i) {
user_agrees();
} elsif ($answer =~ /^n(o)?$/i) {
user_disagrees();
} else {
chomp $answer;
die "`$answer' is neither `yes' nor `no'";
}
Also, you can declare a foreach loop control variable as
lexical by preceding it with the word "my". For
example, in:
foreach my $i (1, 2, 3) {
some_function();
}
$i is a lexical variable, and the scope of $i extends to
the end of the loop, but not beyond it.
Note that you still cannot use my() on global
punctuation variables such as $_ and the like.
pack() and unpack()
A new format 'w' represents a BER compressed integer (as
defined in ASN.1). Its format is a sequence of one or
more bytes, each of which provides seven bits of the
total value, with the most significant first. Bit eight
of each byte is set, except for the last byte, in which
bit eight is clear.
If 'p' or 'P' are given undef as values, they now
generate a NULL pointer.
Both pack() and unpack() now fail when their templates
contain invalid types. (Invalid types used to be
ignored.)
sysseek()
The new sysseek() operator is a variant of seek() that
sets and gets the file's system read/write position,
using the lseek(2) system call. It is the only reliable
way to seek before using sysread() or syswrite(). Its
return value is the new position, or the undefined value
on failure.
perl v5.12.5 Last change: 2012-11-03 8
Perl Programmers Reference Guide PERL5004DELTA(1)
use VERSION
If the first argument to "use" is a number, it is
treated as a version number instead of a module name.
If the version of the Perl interpreter is less than
VERSION, then an error message is printed and Perl exits
immediately. Because "use" occurs at compile time, this
check happens immediately during the compilation
process, unlike "require VERSION", which waits until
runtime for the check. This is often useful if you need
to check the current Perl version before "use"ing
library modules which have changed in incompatible ways
from older versions of Perl. (We try not to do this
more than we have to.)
use Module VERSION LIST
If the VERSION argument is present between Module and
LIST, then the "use" will call the VERSION method in
class Module with the given version as an argument. The
default VERSION method, inherited from the UNIVERSAL
class, croaks if the given version is larger than the
value of the variable $Module::VERSION. (Note that
there is not a comma after VERSION!)
This version-checking mechanism is similar to the one
currently used in the Exporter module, but it is faster
and can be used with modules that don't use the
Exporter. It is the recommended method for new code.
prototype(FUNCTION)
Returns the prototype of a function as a string (or
"undef" if the function has no prototype). FUNCTION is
a reference to or the name of the function whose
prototype you want to retrieve. (Not actually new; just
never documented before.)
srand
The default seed for "srand", which used to be "time",
has been changed. Now it's a heady mix of difficult-to-
predict system-dependent values, which should be
sufficient for most everyday purposes.
Previous to version 5.004, calling "rand" without first
calling "srand" would yield the same sequence of random
numbers on most or all machines. Now, when perl sees
that you're calling "rand" and haven't yet called
"srand", it calls "srand" with the default seed. You
should still call "srand" manually if your code might
ever be run on a pre-5.004 system, of course, or if you
want a seed other than the default.
$_ as Default
Functions documented in the Camel to default to $_ now
perl v5.12.5 Last change: 2012-11-03 9
Perl Programmers Reference Guide PERL5004DELTA(1)
in fact do, and all those that do are so documented in
perlfunc.
"m//gc" does not reset search position on failure
The "m//g" match iteration construct has always reset
its target string's search position (which is visible
through the "pos" operator) when a match fails; as a
result, the next "m//g" match after a failure starts
again at the beginning of the string. With Perl 5.004,
this reset may be disabled by adding the "c" (for
"continue") modifier, i.e. "m//gc". This feature, in
conjunction with the "\G" zero-width assertion, makes it
possible to chain matches together. See perlop and
perlre.
"m//x" ignores whitespace before ?*+{}
The "m//x" construct has always been intended to ignore
all unescaped whitespace. However, before Perl 5.004,
whitespace had the effect of escaping repeat modifiers
like "*" or "?"; for example, "/a *b/x" was
(mis)interpreted as "/a\*b/x". This bug has been fixed
in 5.004.
nested "sub{}" closures work now
Prior to the 5.004 release, nested anonymous functions
didn't work right. They do now.
formats work right on changing lexicals
Just like anonymous functions that contain lexical
variables that change (like a lexical index variable for
a "foreach" loop), formats now work properly. For
example, this silently failed before (printed only
zeros), but is fine now:
my $i;
foreach $i ( 1 .. 10 ) {
write;
}
format =
my i is @#
$i
.
However, it still fails (without a warning) if the
foreach is within a subroutine:
perl v5.12.5 Last change: 2012-11-03 10
Perl Programmers Reference Guide PERL5004DELTA(1)
my $i;
sub foo {
foreach $i ( 1 .. 10 ) {
write;
}
}
foo;
format =
my i is @#
$i
.
New builtin methods
The "UNIVERSAL" package automatically contains the following
methods that are inherited by all other classes:
isa(CLASS)
"isa" returns true if its object is blessed into a
subclass of "CLASS"
"isa" is also exportable and can be called as a sub with
two arguments. This allows the ability to check what a
reference points to. Example:
use UNIVERSAL qw(isa);
if(isa($ref, 'ARRAY')) {
...
}
can(METHOD)
"can" checks to see if its object has a method called
"METHOD", if it does then a reference to the sub is
returned; if it does not then undef is returned.
VERSION( [NEED] )
"VERSION" returns the version number of the class
(package). If the NEED argument is given then it will
check that the current version (as defined by the
$VERSION variable in the given package) not less than
NEED; it will die if this is not the case. This method
is normally called as a class method. This method is
called automatically by the "VERSION" form of "use".
use A 1.2 qw(some imported subs);
# implies:
A->VERSION(1.2);
NOTE: "can" directly uses Perl's internal code for method
lookup, and "isa" uses a very similar method and caching
strategy. This may cause strange effects if the Perl code
dynamically changes @ISA in any package.
perl v5.12.5 Last change: 2012-11-03 11
Perl Programmers Reference Guide PERL5004DELTA(1)
You may add other methods to the UNIVERSAL class via Perl or
XS code. You do not need to "use UNIVERSAL" in order to
make these methods available to your program. This is
necessary only if you wish to have "isa" available as a
plain subroutine in the current package.
TIEHANDLE now supported
See perltie for other kinds of tie()s.
TIEHANDLE classname, LIST
This is the constructor for the class. That means it is
expected to return an object of some sort. The reference
can be used to hold some internal information.
sub TIEHANDLE {
print "<shout>\n";
my $i;
return bless \$i, shift;
}
PRINT this, LIST
This method will be triggered every time the tied handle
is printed to. Beyond its self reference it also
expects the list that was passed to the print function.
sub PRINT {
$r = shift;
$$r++;
return print join( $, => map {uc} @_), $\;
}
PRINTF this, LIST
This method will be triggered every time the tied handle
is printed to with the "printf()" function. Beyond its
self reference it also expects the format and list that
was passed to the printf function.
sub PRINTF {
shift;
my $fmt = shift;
print sprintf($fmt, @_)."\n";
}
READ this LIST
This method will be called when the handle is read from
via the "read" or "sysread" functions.
sub READ {
$r = shift;
my($buf,$len,$offset) = @_;
print "READ called, \$buf=$buf, \$len=$len, \$offset=$offset";
}
perl v5.12.5 Last change: 2012-11-03 12
Perl Programmers Reference Guide PERL5004DELTA(1)
READLINE this
This method will be called when the handle is read from.
The method should return undef when there is no more
data.
sub READLINE {
$r = shift;
return "PRINT called $$r times\n"
}
GETC this
This method will be called when the "getc" function is
called.
sub GETC { print "Don't GETC, Get Perl"; return "a"; }
DESTROY this
As with the other types of ties, this method will be
called when the tied handle is about to be destroyed.
This is useful for debugging and possibly for cleaning
up.
sub DESTROY {
print "</shout>\n";
}
Malloc enhancements
If perl is compiled with the malloc included with the perl
distribution (that is, if "perl -V:d_mymalloc" is 'define')
then you can print memory statistics at runtime by running
Perl thusly:
env PERL_DEBUG_MSTATS=2 perl your_script_here
The value of 2 means to print statistics after compilation
and on exit; with a value of 1, the statistics are printed
only on exit. (If you want the statistics at an arbitrary
time, you'll need to install the optional module
Devel::Peek.)
Three new compilation flags are recognized by malloc.c.
(They have no effect if perl is compiled with system
malloc().)
-DPERL_EMERGENCY_SBRK
If this macro is defined, running out of memory need not
be a fatal error: a memory pool can allocated by
assigning to the special variable $^M. See "$^M".
-DPACK_MALLOC
Perl memory allocation is by bucket with sizes close to
powers of two. Because of these malloc overhead may be
perl v5.12.5 Last change: 2012-11-03 13
Perl Programmers Reference Guide PERL5004DELTA(1)
big, especially for data of size exactly a power of two.
If "PACK_MALLOC" is defined, perl uses a slightly
different algorithm for small allocations (up to 64
bytes long), which makes it possible to have overhead
down to 1 byte for allocations which are powers of two
(and appear quite often).
Expected memory savings (with 8-byte alignment in
"alignbytes") is about 20% for typical Perl usage.
Expected slowdown due to additional malloc overhead is
in fractions of a percent (hard to measure, because of
the effect of saved memory on speed).
-DTWO_POT_OPTIMIZE
Similarly to "PACK_MALLOC", this macro improves
allocations of data with size close to a power of two;
but this works for big allocations (starting with 16K by
default). Such allocations are typical for big hashes
and special-purpose scripts, especially image
processing.
On recent systems, the fact that perl requires 2M from
system for 1M allocation will not affect speed of
execution, since the tail of such a chunk is not going
to be touched (and thus will not require real memory).
However, it may result in a premature out-of-memory
error. So if you will be manipulating very large blocks
with sizes close to powers of two, it would be wise to
define this macro.
Expected saving of memory is 0-100% (100% in
applications which require most memory in such 2**n
chunks); expected slowdown is negligible.
Miscellaneous efficiency enhancements
Functions that have an empty prototype and that do nothing
but return a fixed value are now inlined (e.g. "sub PI () {
3.14159 }").
Each unique hash key is only allocated once, no matter how
many hashes have an entry with that key. So even if you
have 100 copies of the same hash, the hash keys never have
to be reallocated.
Support for More Operating Systems
Support for the following operating systems is new in Perl
5.004.
Win32
Perl 5.004 now includes support for building a "native" perl
under Windows NT, using the Microsoft Visual C++ compiler
(versions 2.0 and above) or the Borland C++ compiler
perl v5.12.5 Last change: 2012-11-03 14
Perl Programmers Reference Guide PERL5004DELTA(1)
(versions 5.02 and above). The resulting perl can be used
under Windows 95 (if it is installed in the same directory
locations as it got installed in Windows NT). This port
includes support for perl extension building tools like
MakeMaker and h2xs, so that many extensions available on the
Comprehensive Perl Archive Network (CPAN) can now be readily
built under Windows NT. See http://www.perl.com/ for more
information on CPAN and README.win32 in the perl
distribution for more details on how to get started with
building this port.
There is also support for building perl under the Cygwin32
environment. Cygwin32 is a set of GNU tools that make it
possible to compile and run many Unix programs under Windows
NT by providing a mostly Unix-like interface for compilation
and execution. See README.cygwin32 in the perl distribution
for more details on this port and how to obtain the Cygwin32
toolkit.
Plan 9
See README.plan9 in the perl distribution.
QNX
See README.qnx in the perl distribution.
AmigaOS
See README.amigaos in the perl distribution.
Pragmata
Six new pragmatic modules exist:
use autouse MODULE => qw(sub1 sub2 sub3)
Defers "require MODULE" until someone calls one of the
specified subroutines (which must be exported by
MODULE). This pragma should be used with caution, and
only when necessary.
use blib
use blib 'dir'
Looks for MakeMaker-like 'blib' directory structure
starting in dir (or current directory) and working back
up to five levels of parent directories.
Intended for use on command line with -M option as a way
of testing arbitrary scripts against an uninstalled
version of a package.
use constant NAME => VALUE
Provides a convenient interface for creating compile-
time constants, See "Constant Functions" in perlsub.
use locale
perl v5.12.5 Last change: 2012-11-03 15
Perl Programmers Reference Guide PERL5004DELTA(1)
Tells the compiler to enable (or disable) the use of
POSIX locales for builtin operations.
When "use locale" is in effect, the current LC_CTYPE
locale is used for regular expressions and case mapping;
LC_COLLATE for string ordering; and LC_NUMERIC for
numeric formatting in printf and sprintf (but not in
print). LC_NUMERIC is always used in write, since
lexical scoping of formats is problematic at best.
Each "use locale" or "no locale" affects statements to
the end of the enclosing BLOCK or, if not inside a
BLOCK, to the end of the current file. Locales can be
switched and queried with POSIX::setlocale().
See perllocale for more information.
use ops
Disable unsafe opcodes, or any named opcodes, when
compiling Perl code.
use vmsish
Enable VMS-specific language features. Currently, there
are three VMS-specific features available: 'status',
which makes $? and "system" return genuine VMS status
values instead of emulating POSIX; 'exit', which makes
"exit" take a genuine VMS status value instead of
assuming that "exit 1" is an error; and 'time', which
makes all times relative to the local time zone, in the
VMS tradition.
Modules
Required Updates
Though Perl 5.004 is compatible with almost all modules that
work with Perl 5.003, there are a few exceptions:
Module Required Version for Perl 5.004
------ -------------------------------
Filter Filter-1.12
LWP libwww-perl-5.08
Tk Tk400.202 (-w makes noise)
Also, the majordomo mailing list program, version 1.94.1,
doesn't work with Perl 5.004 (nor with perl 4), because it
executes an invalid regular expression. This bug is fixed
in majordomo version 1.94.2.
Installation directories
The installperl script now places the Perl source files for
extensions in the architecture-specific library directory,
which is where the shared libraries for extensions have
always been. This change is intended to allow
perl v5.12.5 Last change: 2012-11-03 16
Perl Programmers Reference Guide PERL5004DELTA(1)
administrators to keep the Perl 5.004 library directory
unchanged from a previous version, without running the risk
of binary incompatibility between extensions' Perl source
and shared libraries.
Module information summary
Brand new modules, arranged by topic rather than strictly
alphabetically:
CGI.pm Web server interface ("Common Gateway Interface")
CGI/Apache.pm Support for Apache's Perl module
CGI/Carp.pm Log server errors with helpful context
CGI/Fast.pm Support for FastCGI (persistent server process)
CGI/Push.pm Support for server push
CGI/Switch.pm Simple interface for multiple server types
CPAN Interface to Comprehensive Perl Archive Network
CPAN::FirstTime Utility for creating CPAN configuration file
CPAN::Nox Runs CPAN while avoiding compiled extensions
IO.pm Top-level interface to IO::* classes
IO/File.pm IO::File extension Perl module
IO/Handle.pm IO::Handle extension Perl module
IO/Pipe.pm IO::Pipe extension Perl module
IO/Seekable.pm IO::Seekable extension Perl module
IO/Select.pm IO::Select extension Perl module
IO/Socket.pm IO::Socket extension Perl module
Opcode.pm Disable named opcodes when compiling Perl code
ExtUtils/Embed.pm Utilities for embedding Perl in C programs
ExtUtils/testlib.pm Fixes up @INC to use just-built extension
FindBin.pm Find path of currently executing program
Class/Struct.pm Declare struct-like datatypes as Perl classes
File/stat.pm By-name interface to Perl's builtin stat
Net/hostent.pm By-name interface to Perl's builtin gethost*
Net/netent.pm By-name interface to Perl's builtin getnet*
Net/protoent.pm By-name interface to Perl's builtin getproto*
Net/servent.pm By-name interface to Perl's builtin getserv*
Time/gmtime.pm By-name interface to Perl's builtin gmtime
Time/localtime.pm By-name interface to Perl's builtin localtime
Time/tm.pm Internal object for Time::{gm,local}time
User/grent.pm By-name interface to Perl's builtin getgr*
User/pwent.pm By-name interface to Perl's builtin getpw*
Tie/RefHash.pm Base class for tied hashes with references as keys
UNIVERSAL.pm Base class for *ALL* classes
perl v5.12.5 Last change: 2012-11-03 17
Perl Programmers Reference Guide PERL5004DELTA(1)
Fcntl
New constants in the existing Fcntl modules are now
supported, provided that your operating system happens to
support them:
F_GETOWN F_SETOWN
O_ASYNC O_DEFER O_DSYNC O_FSYNC O_SYNC
O_EXLOCK O_SHLOCK
These constants are intended for use with the Perl operators
sysopen() and fcntl() and the basic database modules like
SDBM_File. For the exact meaning of these and other Fcntl
constants please refer to your operating system's
documentation for fcntl() and open().
In addition, the Fcntl module now provides these constants
for use with the Perl operator flock():
LOCK_SH LOCK_EX LOCK_NB LOCK_UN
These constants are defined in all environments (because
where there is no flock() system call, Perl emulates it).
However, for historical reasons, these constants are not
exported unless they are explicitly requested with the
":flock" tag (e.g. "use Fcntl ':flock'").
IO
The IO module provides a simple mechanism to load all the IO
modules at one go. Currently this includes:
IO::Handle
IO::Seekable
IO::File
IO::Pipe
IO::Socket
For more information on any of these modules, please see its
respective documentation.
Math::Complex
The Math::Complex module has been totally rewritten, and now
supports more operations. These are overloaded:
+ - * / ** <=> neg ~ abs sqrt exp log sin cos atan2 "" (stringify)
And these functions are now exported:
perl v5.12.5 Last change: 2012-11-03 18
Perl Programmers Reference Guide PERL5004DELTA(1)
pi i Re Im arg
log10 logn ln cbrt root
tan
csc sec cot
asin acos atan
acsc asec acot
sinh cosh tanh
csch sech coth
asinh acosh atanh
acsch asech acoth
cplx cplxe
Math::Trig
This new module provides a simpler interface to parts of
Math::Complex for those who need trigonometric functions
only for real numbers.
DB_File
There have been quite a few changes made to DB_File. Here
are a few of the highlights:
o Fixed a handful of bugs.
o By public demand, added support for the standard hash
function exists().
o Made it compatible with Berkeley DB 1.86.
o Made negative subscripts work with RECNO interface.
o Changed the default flags from O_RDWR to O_CREAT|O_RDWR
and the default mode from 0640 to 0666.
o Made DB_File automatically import the open() constants
(O_RDWR, O_CREAT etc.) from Fcntl, if available.
o Updated documentation.
Refer to the HISTORY section in DB_File.pm for a complete
list of changes. Everything after DB_File 1.01 has been
added since 5.003.
Net::Ping
Major rewrite - support added for both udp echo and real
icmp pings.
Object-oriented overrides for builtin operators
Many of the Perl builtins returning lists now have object-
oriented overrides. These are:
perl v5.12.5 Last change: 2012-11-03 19
Perl Programmers Reference Guide PERL5004DELTA(1)
File::stat
Net::hostent
Net::netent
Net::protoent
Net::servent
Time::gmtime
Time::localtime
User::grent
User::pwent
For example, you can now say
use File::stat;
use User::pwent;
$his = (stat($filename)->st_uid == pwent($whoever)->pw_uid);
Utility Changes
pod2html
Sends converted HTML to standard output
The pod2html utility included with Perl 5.004 is
entirely new. By default, it sends the converted HTML
to its standard output, instead of writing it to a file
like Perl 5.003's pod2html did. Use the
--outfile=FILENAME option to write to a file.
xsubpp
"void" XSUBs now default to returning nothing
Due to a documentation/implementation bug in previous
versions of Perl, XSUBs with a return type of "void"
have actually been returning one value. Usually that
value was the GV for the XSUB, but sometimes it was some
already freed or reused value, which would sometimes
lead to program failure.
In Perl 5.004, if an XSUB is declared as returning
"void", it actually returns no value, i.e. an empty list
(though there is a backward-compatibility exception; see
below). If your XSUB really does return an SV, you
should give it a return type of "SV *".
For backward compatibility, xsubpp tries to guess
whether a "void" XSUB is really "void" or if it wants to
return an "SV *". It does so by examining the text of
the XSUB: if xsubpp finds what looks like an assignment
to ST(0), it assumes that the XSUB's return type is
really "SV *".
C Language API Changes
"gv_fetchmethod" and "perl_call_sv"
The "gv_fetchmethod" function finds a method for an
object, just like in Perl 5.003. The GV it returns may
be a method cache entry. However, in Perl 5.004, method
perl v5.12.5 Last change: 2012-11-03 20
Perl Programmers Reference Guide PERL5004DELTA(1)
cache entries are not visible to users; therefore, they
can no longer be passed directly to "perl_call_sv".
Instead, you should use the "GvCV" macro on the GV to
extract its CV, and pass the CV to "perl_call_sv".
The most likely symptom of passing the result of
"gv_fetchmethod" to "perl_call_sv" is Perl's producing
an "Undefined subroutine called" error on the second
call to a given method (since there is no cache on the
first call).
"perl_eval_pv"
A new function handy for eval'ing strings of Perl code
inside C code. This function returns the value from the
eval statement, which can be used instead of fetching
globals from the symbol table. See perlguts, perlembed
and perlcall for details and examples.
Extended API for manipulating hashes
Internal handling of hash keys has changed. The old
hashtable API is still fully supported, and will likely
remain so. The additions to the API allow passing keys
as "SV*"s, so that "tied" hashes can be given real
scalars as keys rather than plain strings (nontied
hashes still can only use strings as keys). New
extensions must use the new hash access functions and
macros if they wish to use "SV*" keys. These additions
also make it feasible to manipulate "HE*"s (hash
entries), which can be more efficient. See perlguts for
details.
Documentation Changes
Many of the base and library pods were updated. These new
pods are included in section 1:
perldelta
This document.
perlfaq
Frequently asked questions.
perllocale
Locale support (internationalization and localization).
perltoot
Tutorial on Perl OO programming.
perlapio
Perl internal IO abstraction interface.
perlmodlib
Perl module library and recommended practice for module
perl v5.12.5 Last change: 2012-11-03 21
Perl Programmers Reference Guide PERL5004DELTA(1)
creation. Extracted from perlmod (which is much smaller
as a result).
perldebug
Although not new, this has been massively updated.
perlsec
Although not new, this has been massively updated.
New Diagnostics
Several new conditions will trigger warnings that were
silent before. Some only affect certain platforms. The
following new warnings and errors outline these. These
messages are classified as follows (listed in increasing
order of desperation):
(W) A warning (optional).
(D) A deprecation (optional).
(S) A severe warning (mandatory).
(F) A fatal error (trappable).
(P) An internal error you should never see (trappable).
(X) A very fatal error (nontrappable).
(A) An alien error message (not generated by Perl).
"my" variable %s masks earlier declaration in same scope
(W) A lexical variable has been redeclared in the same
scope, effectively eliminating all access to the
previous instance. This is almost always a
typographical error. Note that the earlier variable
will still exist until the end of the scope or until all
closure referents to it are destroyed.
%s argument is not a HASH element or slice
(F) The argument to delete() must be either a hash
element, such as
$foo{$bar}
$ref->[12]->{"susie"}
or a hash slice, such as
@foo{$bar, $baz, $xyzzy}
@{$ref->[12]}{"susie", "queue"}
Allocation too large: %lx
(X) You can't allocate more than 64K on an MS-DOS
machine.
Allocation too large
(F) You can't allocate more than 2^31+"small amount"
bytes.
perl v5.12.5 Last change: 2012-11-03 22
Perl Programmers Reference Guide PERL5004DELTA(1)
Applying %s to %s will act on scalar(%s)
(W) The pattern match (//), substitution (s///), and
transliteration (tr///) operators work on scalar values.
If you apply one of them to an array or a hash, it will
convert the array or hash to a scalar value (the length
of an array or the population info of a hash) and then
work on that scalar value. This is probably not what
you meant to do. See "grep" in perlfunc and "map" in
perlfunc for alternatives.
Attempt to free nonexistent shared string
(P) Perl maintains a reference counted internal table of
strings to optimize the storage and access of hash keys
and other strings. This indicates someone tried to
decrement the reference count of a string that can no
longer be found in the table.
Attempt to use reference as lvalue in substr
(W) You supplied a reference as the first argument to
substr() used as an lvalue, which is pretty strange.
Perhaps you forgot to dereference it first. See
"substr" in perlfunc.
Bareword "%s" refers to nonexistent package
(W) You used a qualified bareword of the form "Foo::",
but the compiler saw no other uses of that namespace
before that point. Perhaps you need to predeclare a
package?
Can't redefine active sort subroutine %s
(F) Perl optimizes the internal handling of sort
subroutines and keeps pointers into them. You tried to
redefine one such sort subroutine when it was currently
active, which is not allowed. If you really want to do
this, you should write "sort { &func } @x" instead of
"sort func @x".
Can't use bareword ("%s") as %s ref while "strict refs" in
use
(F) Only hard references are allowed by "strict refs".
Symbolic references are disallowed. See perlref.
Cannot resolve method `%s' overloading `%s' in package `%s'
(P) Internal error trying to resolve overloading
specified by a method name (as opposed to a subroutine
reference).
Constant subroutine %s redefined
(S) You redefined a subroutine which had previously been
eligible for inlining. See "Constant Functions" in
perlsub for commentary and workarounds.
perl v5.12.5 Last change: 2012-11-03 23
Perl Programmers Reference Guide PERL5004DELTA(1)
Constant subroutine %s undefined
(S) You undefined a subroutine which had previously been
eligible for inlining. See "Constant Functions" in
perlsub for commentary and workarounds.
Copy method did not return a reference
(F) The method which overloads "=" is buggy. See "Copy
Constructor" in overload.
Died
(F) You passed die() an empty string (the equivalent of
"die """) or you called it with no args and both $@ and
$_ were empty.
Exiting pseudo-block via %s
(W) You are exiting a rather special block construct
(like a sort block or subroutine) by unconventional
means, such as a goto, or a loop control statement. See
"sort" in perlfunc.
Identifier too long
(F) Perl limits identifiers (names for variables,
functions, etc.) to 252 characters for simple names,
somewhat more for compound names (like $A::B). You've
exceeded Perl's limits. Future versions of Perl are
likely to eliminate these arbitrary limitations.
Illegal character %s (carriage return)
(F) A carriage return character was found in the input.
This is an error, and not a warning, because carriage
return characters can break multi-line strings,
including here documents (e.g., "print <<EOF;").
Illegal switch in PERL5OPT: %s
(X) The PERL5OPT environment variable may only be used
to set the following switches: -[DIMUdmw].
Integer overflow in hex number
(S) The literal hex number you have specified is too big
for your architecture. On a 32-bit architecture the
largest hex literal is 0xFFFFFFFF.
Integer overflow in octal number
(S) The literal octal number you have specified is too
big for your architecture. On a 32-bit architecture the
largest octal literal is 037777777777.
internal error: glob failed
(P) Something went wrong with the external program(s)
used for "glob" and "<*.c>". This may mean that your
csh (C shell) is broken. If so, you should change all
of the csh-related variables in config.sh: If you have
perl v5.12.5 Last change: 2012-11-03 24
Perl Programmers Reference Guide PERL5004DELTA(1)
tcsh, make the variables refer to it as if it were csh
(e.g. "full_csh='/usr/bin/tcsh'"); otherwise, make them
all empty (except that "d_csh" should be 'undef') so
that Perl will think csh is missing. In either case,
after editing config.sh, run "./Configure -S" and
rebuild Perl.
Invalid conversion in %s: "%s"
(W) Perl does not understand the given format
conversion. See "sprintf" in perlfunc.
Invalid type in pack: '%s'
(F) The given character is not a valid pack type. See
"pack" in perlfunc.
Invalid type in unpack: '%s'
(F) The given character is not a valid unpack type. See
"unpack" in perlfunc.
Name "%s::%s" used only once: possible typo
(W) Typographical errors often show up as unique
variable names. If you had a good reason for having a
unique name, then just mention it again somehow to
suppress the message (the "use vars" pragma is provided
for just this purpose).
Null picture in formline
(F) The first argument to formline must be a valid
format picture specification. It was found to be empty,
which probably means you supplied it an uninitialized
value. See perlform.
Offset outside string
(F) You tried to do a read/write/send/recv operation
with an offset pointing outside the buffer. This is
difficult to imagine. The sole exception to this is
that "sysread()"ing past the buffer will extend the
buffer and zero pad the new area.
Out of memory!
(X|F) The malloc() function returned 0, indicating there
was insufficient remaining memory (or virtual memory) to
satisfy the request.
The request was judged to be small, so the possibility
to trap it depends on the way Perl was compiled. By
default it is not trappable. However, if compiled for
this, Perl may use the contents of $^M as an emergency
pool after die()ing with this message. In this case the
error is trappable once.
Out of memory during request for %s
perl v5.12.5 Last change: 2012-11-03 25
Perl Programmers Reference Guide PERL5004DELTA(1)
(F) The malloc() function returned 0, indicating there
was insufficient remaining memory (or virtual memory) to
satisfy the request. However, the request was judged
large enough (compile-time default is 64K), so a
possibility to shut down by trapping this error is
granted.
panic: frexp
(P) The library function frexp() failed, making
printf("%f") impossible.
Possible attempt to put comments in qw() list
(W) qw() lists contain items separated by whitespace; as
with literal strings, comment characters are not
ignored, but are instead treated as literal data. (You
may have used different delimiters than the parentheses
shown here; braces are also frequently used.)
You probably wrote something like this:
@list = qw(
a # a comment
b # another comment
);
when you should have written this:
@list = qw(
a
b
);
If you really want comments, build your list the old-
fashioned way, with quotes and commas:
@list = (
'a', # a comment
'b', # another comment
);
Possible attempt to separate words with commas
(W) qw() lists contain items separated by whitespace;
therefore commas aren't needed to separate the items.
(You may have used different delimiters than the
parentheses shown here; braces are also frequently
used.)
You probably wrote something like this:
qw! a, b, c !;
which puts literal commas into some of the list items.
perl v5.12.5 Last change: 2012-11-03 26
Perl Programmers Reference Guide PERL5004DELTA(1)
Write it without commas if you don't want them to appear
in your data:
qw! a b c !;
Scalar value @%s{%s} better written as $%s{%s}
(W) You've used a hash slice (indicated by @) to select
a single element of a hash. Generally it's better to
ask for a scalar value (indicated by $). The difference
is that $foo{&bar} always behaves like a scalar, both
when assigning to it and when evaluating its argument,
while @foo{&bar} behaves like a list when you assign to
it, and provides a list context to its subscript, which
can do weird things if you're expecting only one
subscript.
Stub found while resolving method `%s' overloading `%s' in
%s
(P) Overloading resolution over @ISA tree may be broken
by importing stubs. Stubs should never be implicitly
created, but explicit calls to "can" may break this.
Too late for "-T" option
(X) The #! line (or local equivalent) in a Perl script
contains the -T option, but Perl was not invoked with -T
in its argument list. This is an error because, by the
time Perl discovers a -T in a script, it's too late to
properly taint everything from the environment. So Perl
gives up.
untie attempted while %d inner references still exist
(W) A copy of the object returned from "tie" (or "tied")
was still valid when "untie" was called.
Unrecognized character %s
(F) The Perl parser has no idea what to do with the
specified character in your Perl script (or eval).
Perhaps you tried to run a compressed script, a binary
program, or a directory as a Perl program.
Unsupported function fork
(F) Your version of executable does not support forking.
Note that under some systems, like OS/2, there may be
different flavors of Perl executables, some of which may
support fork, some not. Try changing the name you call
Perl by to "perl_", "perl__", and so on.
Use of "$$<digit>" to mean "${$}<digit>" is deprecated
(D) Perl versions before 5.004 misinterpreted any type
marker followed by "$" and a digit. For example, "$$0"
was incorrectly taken to mean "${$}0" instead of
perl v5.12.5 Last change: 2012-11-03 27
Perl Programmers Reference Guide PERL5004DELTA(1)
"${$0}". This bug is (mostly) fixed in Perl 5.004.
However, the developers of Perl 5.004 could not fix this
bug completely, because at least two widely-used modules
depend on the old meaning of "$$0" in a string. So Perl
5.004 still interprets "$$<digit>" in the old (broken)
way inside strings; but it generates this message as a
warning. And in Perl 5.005, this special treatment will
cease.
Value of %s can be "0"; test with defined()
(W) In a conditional expression, you used <HANDLE>, <*>
(glob), "each()", or "readdir()" as a boolean value.
Each of these constructs can return a value of "0"; that
would make the conditional expression false, which is
probably not what you intended. When using these
constructs in conditional expressions, test their values
with the "defined" operator.
Variable "%s" may be unavailable
(W) An inner (nested) anonymous subroutine is inside a
named subroutine, and outside that is another
subroutine; and the anonymous (innermost) subroutine is
referencing a lexical variable defined in the outermost
subroutine. For example:
sub outermost { my $a; sub middle { sub { $a } } }
If the anonymous subroutine is called or referenced
(directly or indirectly) from the outermost subroutine,
it will share the variable as you would expect. But if
the anonymous subroutine is called or referenced when
the outermost subroutine is not active, it will see the
value of the shared variable as it was before and during
the *first* call to the outermost subroutine, which is
probably not what you want.
In these circumstances, it is usually best to make the
middle subroutine anonymous, using the "sub {}" syntax.
Perl has specific support for shared variables in nested
anonymous subroutines; a named subroutine in between
interferes with this feature.
Variable "%s" will not stay shared
(W) An inner (nested) named subroutine is referencing a
lexical variable defined in an outer subroutine.
When the inner subroutine is called, it will probably
see the value of the outer subroutine's variable as it
was before and during the *first* call to the outer
subroutine; in this case, after the first call to the
outer subroutine is complete, the inner and outer
perl v5.12.5 Last change: 2012-11-03 28
Perl Programmers Reference Guide PERL5004DELTA(1)
subroutines will no longer share a common value for the
variable. In other words, the variable will no longer
be shared.
Furthermore, if the outer subroutine is anonymous and
references a lexical variable outside itself, then the
outer and inner subroutines will never share the given
variable.
This problem can usually be solved by making the inner
subroutine anonymous, using the "sub {}" syntax. When
inner anonymous subs that reference variables in outer
subroutines are called or referenced, they are
automatically rebound to the current values of such
variables.
Warning: something's wrong
(W) You passed warn() an empty string (the equivalent of
"warn """) or you called it with no args and $_ was
empty.
Ill-formed logical name |%s| in prime_env_iter
(W) A warning peculiar to VMS. A logical name was
encountered when preparing to iterate over %ENV which
violates the syntactic rules governing logical names.
Since it cannot be translated normally, it is skipped,
and will not appear in %ENV. This may be a benign
occurrence, as some software packages might directly
modify logical name tables and introduce nonstandard
names, or it may indicate that a logical name table has
been corrupted.
Got an error from DosAllocMem
(P) An error peculiar to OS/2. Most probably you're
using an obsolete version of Perl, and this should not
happen anyway.
Malformed PERLLIB_PREFIX
(F) An error peculiar to OS/2. PERLLIB_PREFIX should be
of the form
prefix1;prefix2
or
prefix1 prefix2
with nonempty prefix1 and prefix2. If "prefix1" is
indeed a prefix of a builtin library search path,
prefix2 is substituted. The error may appear if
components are not found, or are too long. See
"PERLLIB_PREFIX" in README.os2.
perl v5.12.5 Last change: 2012-11-03 29
Perl Programmers Reference Guide PERL5004DELTA(1)
PERL_SH_DIR too long
(F) An error peculiar to OS/2. PERL_SH_DIR is the
directory to find the "sh"-shell in. See "PERL_SH_DIR"
in README.os2.
Process terminated by SIG%s
(W) This is a standard message issued by OS/2
applications, while *nix applications die in silence.
It is considered a feature of the OS/2 port. One can
easily disable this by appropriate sighandlers, see
"Signals" in perlipc. See also "Process terminated by
SIGTERM/SIGINT" in README.os2.
BUGS
If you find what you think is a bug, you might check the
headers of recently posted articles in the
comp.lang.perl.misc newsgroup. There may also be
information at http://www.perl.com/perl/ , the Perl Home
Page.
If you believe you have an unreported bug, please run the
perlbug program included with your release. Make sure you
trim your bug down to a tiny but sufficient test case. Your
bug report, along with the output of "perl -V", will be sent
off to <perlbug@perl.com> to be analysed by the Perl porting
team.
ATTRIBUTES
See attributes(5) for descriptions of the following
attributes:
+---------------+------------------+
|ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+---------------+------------------+
|Availability | runtime/perl-512 |
+---------------+------------------+
|Stability | Uncommitted |
+---------------+------------------+
SEE ALSO
The Changes file for exhaustive details on what changed.
The INSTALL file for how to build Perl. This file has been
significantly updated for 5.004, so even veteran users
should look through it.
The README file for general stuff.
The Copying file for copyright information.
HISTORY
Constructed by Tom Christiansen, grabbing material with
perl v5.12.5 Last change: 2012-11-03 30
Perl Programmers Reference Guide PERL5004DELTA(1)
permission from innumerable contributors, with kibitzing by
more than a few Perl porters.
Last update: Wed May 14 11:14:09 EDT 1997
NOTES
This software was built from source available at
https://java.net/projects/solaris-userland. The original
community source was downloaded from
http://www.cpan.org/src/5.0/perl-5.12.5.tar.bz2
Further information about this software can be found on the
open source community website at http://www.perl.org/.
perl v5.12.5 Last change: 2012-11-03 31