perltrap
(1)
名前
perltrap - Perl traps for the unwary
形式
Please see following description for synopsis
説明
Perl Programmers Reference Guide PERLTRAP(1)
NAME
perltrap - Perl traps for the unwary
DESCRIPTION
The biggest trap of all is forgetting to "use warnings" or
use the -w switch; see perllexwarn and perlrun. The second
biggest trap is not making your entire program runnable
under "use strict". The third biggest trap is not reading
the list of changes in this version of Perl; see perldelta.
Awk Traps
Accustomed awk users should take special note of the
following:
o A Perl program executes only once, not once for each
input line. You can do an implicit loop with "-n" or
"-p".
o The English module, loaded via
use English;
allows you to refer to special variables (like $/) with
names (like $RS), as though they were in awk; see
perlvar for details.
o Semicolons are required after all simple statements in
Perl (except at the end of a block). Newline is not a
statement delimiter.
o Curly brackets are required on "if"s and "while"s.
o Variables begin with "$", "@" or "%" in Perl.
o Arrays index from 0. Likewise string positions in
substr() and index().
o You have to decide whether your array has numeric or
string indices.
o Hash values do not spring into existence upon mere
reference.
o You have to decide whether you want to use string or
numeric comparisons.
o Reading an input line does not split it for you. You
get to split it to an array yourself. And the split()
operator has different arguments than awk's.
o The current input line is normally in $_, not $0. It
generally does not have the newline stripped. ($0 is
perl v5.12.5 Last change: 2012-11-03 1
Perl Programmers Reference Guide PERLTRAP(1)
the name of the program executed.) See perlvar.
o $<digit> does not refer to fields--it refers to
substrings matched by the last match pattern.
o The print() statement does not add field and record
separators unless you set $, and "$\". You can set $OFS
and $ORS if you're using the English module.
o You must open your files before you print to them.
o The range operator is "..", not comma. The comma
operator works as in C.
o The match operator is "=~", not "~". ("~" is the one's
complement operator, as in C.)
o The exponentiation operator is "**", not "^". "^" is
the XOR operator, as in C. (You know, one could get the
feeling that awk is basically incompatible with C.)
o The concatenation operator is ".", not the null string.
(Using the null string would render "/pat/ /pat/"
unparsable, because the third slash would be interpreted
as a division operator--the tokenizer is in fact
slightly context sensitive for operators like "/", "?",
and ">". And in fact, "." itself can be the beginning
of a number.)
o The "next", "exit", and "continue" keywords work
differently.
o The following variables work differently:
Awk Perl
ARGC scalar @ARGV (compare with $#ARGV)
ARGV[0] $0
FILENAME $ARGV
FNR $. - something
FS (whatever you like)
NF $#Fld, or some such
NR $.
OFMT $#
OFS $,
ORS $\
RLENGTH length($&)
RS $/
RSTART length($`)
SUBSEP $;
o You cannot set $RS to a pattern, only a string.
perl v5.12.5 Last change: 2012-11-03 2
Perl Programmers Reference Guide PERLTRAP(1)
o When in doubt, run the awk construct through a2p and see
what it gives you.
C/C++ Traps
Cerebral C and C++ programmers should take note of the
following:
o Curly brackets are required on "if"'s and "while"'s.
o You must use "elsif" rather than "else if".
o The "break" and "continue" keywords from C become in
Perl "last" and "next", respectively. Unlike in C,
these do not work within a "do { } while" construct.
See "Loop Control" in perlsyn.
o The switch statement is called "given/when" and only
available in perl 5.10 or newer. See "Switch statements"
in perlsyn.
o Variables begin with "$", "@" or "%" in Perl.
o Comments begin with "#", not "/*" or "//". Perl may
interpret C/C++ comments as division operators,
unterminated regular expressions or the defined-or
operator.
o You can't take the address of anything, although a
similar operator in Perl is the backslash, which creates
a reference.
o "ARGV" must be capitalized. $ARGV[0] is C's "argv[1]",
and "argv[0]" ends up in $0.
o System calls such as link(), unlink(), rename(), etc.
return nonzero for success, not 0. (system(), however,
returns zero for success.)
o Signal handlers deal with signal names, not numbers.
Use "kill -l" to find their names on your system.
Sed Traps
Seasoned sed programmers should take note of the following:
o A Perl program executes only once, not once for each
input line. You can do an implicit loop with "-n" or
"-p".
o Backreferences in substitutions use "$" rather than "\".
o The pattern matching metacharacters "(", ")", and "|" do
not have backslashes in front.
perl v5.12.5 Last change: 2012-11-03 3
Perl Programmers Reference Guide PERLTRAP(1)
o The range operator is "...", rather than comma.
Shell Traps
Sharp shell programmers should take note of the following:
o The backtick operator does variable interpolation
without regard to the presence of single quotes in the
command.
o The backtick operator does no translation of the return
value, unlike csh.
o Shells (especially csh) do several levels of
substitution on each command line. Perl does
substitution in only certain constructs such as double
quotes, backticks, angle brackets, and search patterns.
o Shells interpret scripts a little bit at a time. Perl
compiles the entire program before executing it (except
for "BEGIN" blocks, which execute at compile time).
o The arguments are available via @ARGV, not $1, $2, etc.
o The environment is not automatically made available as
separate scalar variables.
o The shell's "test" uses "=", "!=", "<" etc for string
comparisons and "-eq", "-ne", "-lt" etc for numeric
comparisons. This is the reverse of Perl, which uses
"eq", "ne", "lt" for string comparisons, and "==", "!="
"<" etc for numeric comparisons.
Perl Traps
Practicing Perl Programmers should take note of the
following:
o Remember that many operations behave differently in a
list context than they do in a scalar one. See perldata
for details.
o Avoid barewords if you can, especially all lowercase
ones. You can't tell by just looking at it whether a
bareword is a function or a string. By using quotes on
strings and parentheses on function calls, you won't
ever get them confused.
o You cannot discern from mere inspection which builtins
are unary operators (like chop() and chdir()) and which
are list operators (like print() and unlink()). (Unless
prototyped, user-defined subroutines can only be list
operators, never unary ones.) See perlop and perlsub.
perl v5.12.5 Last change: 2012-11-03 4
Perl Programmers Reference Guide PERLTRAP(1)
o People have a hard time remembering that some functions
default to $_, or @ARGV, or whatever, but that others
which you might expect to do not.
o The <FH> construct is not the name of the filehandle, it
is a readline operation on that handle. The data read
is assigned to $_ only if the file read is the sole
condition in a while loop:
while (<FH>) { }
while (defined($_ = <FH>)) { }..
<FH>; # data discarded!
o Remember not to use "=" when you need "=~"; these two
constructs are quite different:
$x = /foo/;
$x =~ /foo/;
o The "do {}" construct isn't a real loop that you can use
loop control on.
o Use "my()" for local variables whenever you can get away
with it (but see perlform for where you can't). Using
"local()" actually gives a local value to a global
variable, which leaves you open to unforeseen side-
effects of dynamic scoping.
o If you localize an exported variable in a module, its
exported value will not change. The local name becomes
an alias to a new value but the external name is still
an alias for the original.
Perl4 to Perl5 Traps
Practicing Perl4 Programmers should take note of the
following Perl4-to-Perl5 specific traps.
They're crudely ordered according to the following list:
Discontinuance, Deprecation, and BugFix traps
Anything that's been fixed as a perl4 bug, removed as a
perl4 feature or deprecated as a perl4 feature with the
intent to encourage usage of some other perl5 feature.
Parsing Traps
Traps that appear to stem from the new parser.
Numerical Traps
Traps having to do with numerical or mathematical
operators.
General data type traps
perl v5.12.5 Last change: 2012-11-03 5
Perl Programmers Reference Guide PERLTRAP(1)
Traps involving perl standard data types.
Context Traps - scalar, list contexts
Traps related to context within lists, scalar
statements/declarations.
Precedence Traps
Traps related to the precedence of parsing, evaluation,
and execution of code.
General Regular Expression Traps using s///, etc.
Traps related to the use of pattern matching.
Subroutine, Signal, Sorting Traps
Traps related to the use of signals and signal handlers,
general subroutines, and sorting, along with sorting
subroutines.
OS Traps
OS-specific traps.
DBM Traps
Traps specific to the use of "dbmopen()", and specific
dbm implementations.
Unclassified Traps
Everything else.
If you find an example of a conversion trap that is not
listed here, please submit it to <perlbug@perl.org> for
inclusion. Also note that at least some of these can be
caught with the "use warnings" pragma or the -w switch.
Discontinuance, Deprecation, and BugFix traps
Anything that has been discontinued, deprecated, or fixed as
a bug from perl4.
o Symbols starting with "_" no longer forced into main
Symbols starting with "_" are no longer forced into
package main, except for $_ itself (and @_, etc.).
package test;
$_legacy = 1;
package main;
print "\$_legacy is ",$_legacy,"\n";
# perl4 prints: $_legacy is 1
# perl5 prints: $_legacy is
o Double-colon valid package separator in variable name
perl v5.12.5 Last change: 2012-11-03 6
Perl Programmers Reference Guide PERLTRAP(1)
Double-colon is now a valid package separator in a
variable name. Thus these behave differently in perl4
vs. perl5, because the packages don't exist.
$a=1;$b=2;$c=3;$var=4;
print "$a::$b::$c ";
print "$var::abc::xyz\n";
# perl4 prints: 1::2::3 4::abc::xyz
# perl5 prints: 3
Given that "::" is now the preferred package delimiter,
it is debatable whether this should be classed as a bug
or not. (The older package delimiter, ' ,is used here)
$x = 10;
print "x=${'x}\n";
# perl4 prints: x=10
# perl5 prints: Can't find string terminator "'" anywhere before EOF
You can avoid this problem, and remain compatible with
perl4, if you always explicitly include the package
name:
$x = 10;
print "x=${main'x}\n";
Also see precedence traps, for parsing $:.
o 2nd and 3rd args to "splice()" are now in scalar context
The second and third arguments of "splice()" are now
evaluated in scalar context (as the Camel says) rather
than list context.
sub sub1{return(0,2) } # return a 2-element list
sub sub2{ return(1,2,3)} # return a 3-element list
@a1 = ("a","b","c","d","e");
@a2 = splice(@a1,&sub1,&sub2);
print join(' ',@a2),"\n";
# perl4 prints: a b
# perl5 prints: c d e
o Can't do "goto" into a block that is optimized away
You can't do a "goto" into a block that is optimized
away. Darn.
goto marker1;
perl v5.12.5 Last change: 2012-11-03 7
Perl Programmers Reference Guide PERLTRAP(1)
for(1){
marker1:
print "Here I is!\n";
}
# perl4 prints: Here I is!
# perl5 errors: Can't "goto" into the middle of a foreach loop
o Can't use whitespace as variable name or quote delimiter
It is no longer syntactically legal to use whitespace as
the name of a variable, or as a delimiter for any kind
of quote construct. Double darn.
$a = ("foo bar");
$b = q baz;
print "a is $a, b is $b\n";
# perl4 prints: a is foo bar, b is baz
# perl5 errors: Bareword found where operator expected
o "while/if BLOCK BLOCK" gone
The archaic while/if BLOCK BLOCK syntax is no longer
supported.
if { 1 } {
print "True!";
}
else {
print "False!";
}
# perl4 prints: True!
# perl5 errors: syntax error at test.pl line 1, near "if {"
o "**" binds tighter than unary minus
The "**" operator now binds more tightly than unary
minus. It was documented to work this way before, but
didn't.
print -4**2,"\n";
# perl4 prints: 16
# perl5 prints: -16
o "foreach" changed when iterating over a list
The meaning of "foreach{}" has changed slightly when it
is iterating over a list which is not an array. This
used to assign the list to a temporary array, but no
perl v5.12.5 Last change: 2012-11-03 8
Perl Programmers Reference Guide PERLTRAP(1)
longer does so (for efficiency). This means that you'll
now be iterating over the actual values, not over copies
of the values. Modifications to the loop variable can
change the original values.
@list = ('ab','abc','bcd','def');
foreach $var (grep(/ab/,@list)){
$var = 1;
}
print (join(':',@list));
# perl4 prints: ab:abc:bcd:def
# perl5 prints: 1:1:bcd:def
To retain Perl4 semantics you need to assign your list
explicitly to a temporary array and then iterate over
that. For example, you might need to change
foreach $var (grep(/ab/,@list)){
to
foreach $var (@tmp = grep(/ab/,@list)){
Otherwise changing $var will clobber the values of
@list. (This most often happens when you use $_ for the
loop variable, and call subroutines in the loop that
don't properly localize $_.)
o "split" with no args behavior changed
"split" with no arguments now behaves like "split ' '"
(which doesn't return an initial null field if $_ starts
with whitespace), it used to behave like "split /\s+/"
(which does).
$_ = ' hi mom';
print join(':', split);
# perl4 prints: :hi:mom
# perl5 prints: hi:mom
o -e behavior fixed
Perl 4 would ignore any text which was attached to an -e
switch, always taking the code snippet from the
following arg. Additionally, it would silently accept
an -e switch without a following arg. Both of these
behaviors have been fixed.
perl -e'print "attached to -e"' 'print "separate arg"'
perl v5.12.5 Last change: 2012-11-03 9
Perl Programmers Reference Guide PERLTRAP(1)
# perl4 prints: separate arg
# perl5 prints: attached to -e
perl -e
# perl4 prints:
# perl5 dies: No code specified for -e.
o "push" returns number of elements in resulting list
In Perl 4 the return value of "push" was undocumented,
but it was actually the last value being pushed onto the
target list. In Perl 5 the return value of "push" is
documented, but has changed, it is the number of
elements in the resulting list.
@x = ('existing');
print push(@x, 'first new', 'second new');
# perl4 prints: second new
# perl5 prints: 3
o Some error messages differ
Some error messages will be different.
o "split()" honors subroutine args
In Perl 4, if in list context the delimiters to the
first argument of "split()" were "??", the result would
be placed in @_ as well as being returned. Perl 5 has
more respect for your subroutine arguments.
o Bugs removed
Some bugs may have been inadvertently removed. :-)
Parsing Traps
Perl4-to-Perl5 traps from having to do with parsing.
o Space between . and = triggers syntax error
Note the space between . and =
$string . = "more string";
print $string;
# perl4 prints: more string
# perl5 prints: syntax error at - line 1, near ". ="
o Better parsing in perl 5
perl v5.12.5 Last change: 2012-11-03 10
Perl Programmers Reference Guide PERLTRAP(1)
Better parsing in perl 5
sub foo {}
&foo
print("hello, world\n");
# perl4 prints: hello, world
# perl5 prints: syntax error
o Function parsing
"if it looks like a function, it is a function" rule.
print
($foo == 1) ? "is one\n" : "is zero\n";
# perl4 prints: is zero
# perl5 warns: "Useless use of a constant in void context" if using -w
o String interpolation of $#array differs
String interpolation of the $#array construct differs
when braces are to used around the name.
@a = (1..3);
print "${#a}";
# perl4 prints: 2
# perl5 fails with syntax error
@ = (1..3);
print "$#{a}";
# perl4 prints: {a}
# perl5 prints: 2
o Perl guesses on "map", "grep" followed by "{" if it
starts BLOCK or hash ref
When perl sees "map {" (or "grep {"), it has to guess
whether the "{" starts a BLOCK or a hash reference. If
it guesses wrong, it will report a syntax error near the
"}" and the missing (or unexpected) comma.
Use unary "+" before "{" on a hash reference, and unary
"+" applied to the first thing in a BLOCK (after "{"),
for perl to guess right all the time. (See "map" in
perlfunc.)
Numerical Traps
Perl4-to-Perl5 traps having to do with numerical operators,
operands, or output from same.
perl v5.12.5 Last change: 2012-11-03 11
Perl Programmers Reference Guide PERLTRAP(1)
o Formatted output and significant digits
Formatted output and significant digits. In general,
Perl 5 tries to be more precise. For example, on a
Solaris Sparc:
print 7.373504 - 0, "\n";
printf "%20.18f\n", 7.373504 - 0;
# Perl4 prints:
7.3750399999999996141
7.375039999999999614
# Perl5 prints:
7.373504
7.375039999999999614
Notice how the first result looks better in Perl 5.
Your results may vary, since your floating point
formatting routines and even floating point format may
be slightly different.
o Auto-increment operator over signed int limit deleted
This specific item has been deleted. It demonstrated
how the auto-increment operator would not catch when a
number went over the signed int limit. Fixed in
version 5.003_04. But always be wary when using large
integers. If in doubt:
use Math::BigInt;
o Assignment of return values from numeric equality tests
doesn't work
Assignment of return values from numeric equality tests
does not work in perl5 when the test evaluates to false
(0). Logical tests now return a null, instead of 0
$p = ($test == 1);
print $p,"\n";
# perl4 prints: 0
# perl5 prints:
Also see "//, etc."" in "General Regular Expression
Traps using s for another example of this new
feature...
o Bitwise string ops
perl v5.12.5 Last change: 2012-11-03 12
Perl Programmers Reference Guide PERLTRAP(1)
When bitwise operators which can operate upon either
numbers or strings ("& | ^ ~") are given only strings
as arguments, perl4 would treat the operands as
bitstrings so long as the program contained a call to
the "vec()" function. perl5 treats the string operands
as bitstrings. (See "Bitwise String Operators" in
perlop for more details.)
$fred = "10";
$barney = "12";
$betty = $fred & $barney;
print "$betty\n";
# Uncomment the next line to change perl4's behavior
# ($dummy) = vec("dummy", 0, 0);
# Perl4 prints:
8
# Perl5 prints:
10
# If vec() is used anywhere in the program, both print:
10
General data type traps
Perl4-to-Perl5 traps involving most data-types, and their
usage within certain expressions and/or context.
o Negative array subscripts now count from the end of
array
Negative array subscripts now count from the end of the
array.
@a = (1, 2, 3, 4, 5);
print "The third element of the array is $a[3] also expressed as $a[-2] \n";
# perl4 prints: The third element of the array is 4 also expressed as
# perl5 prints: The third element of the array is 4 also expressed as 4
o Setting $#array lower now discards array elements
Setting $#array lower now discards array elements, and
makes them impossible to recover.
@a = (a,b,c,d,e);
print "Before: ",join('',@a);
$#a =1;
print ", After: ",join('',@a);
$#a =3;
print ", Recovered: ",join('',@a),"\n";
perl v5.12.5 Last change: 2012-11-03 13
Perl Programmers Reference Guide PERLTRAP(1)
# perl4 prints: Before: abcde, After: ab, Recovered: abcd
# perl5 prints: Before: abcde, After: ab, Recovered: ab
o Hashes get defined before use
Hashes get defined before use
local($s,@a,%h);
die "scalar \$s defined" if defined($s);
die "array \@a defined" if defined(@a);
die "hash \%h defined" if defined(%h);
# perl4 prints:
# perl5 dies: hash %h defined
Perl will now generate a warning when it sees
defined(@a) and defined(%h).
o Glob assignment from localized variable to variable
glob assignment from variable to variable will fail if
the assigned variable is localized subsequent to the
assignment
@a = ("This is Perl 4");
*b = *a;
local(@a);
print @b,"\n";
# perl4 prints: This is Perl 4
# perl5 prints:
o Assigning "undef" to glob
Assigning "undef" to a glob has no effect in Perl 5.
In Perl 4 it undefines the associated scalar (but may
have other side effects including SEGVs). Perl 5 will
also warn if "undef" is assigned to a typeglob. (Note
that assigning "undef" to a typeglob is different than
calling the "undef" function on a typeglob ("undef
*foo"), which has quite a few effects.
$foo = "bar";
*foo = undef;
print $foo;
# perl4 prints:
# perl4 warns: "Use of uninitialized variable" if using -w
# perl5 prints: bar
# perl5 warns: "Undefined value assigned to typeglob" if using -w
o Changes in unary negation (of strings)
perl v5.12.5 Last change: 2012-11-03 14
Perl Programmers Reference Guide PERLTRAP(1)
Changes in unary negation (of strings) This change
effects both the return value and what it does to
auto(magic)increment.
$x = "aaa";
print ++$x," : ";
print -$x," : ";
print ++$x,"\n";
# perl4 prints: aab : -0 : 1
# perl5 prints: aab : -aab : aac
o Modifying of constants prohibited
perl 4 lets you modify constants:
$foo = "x";
&mod($foo);
for ($x = 0; $x < 3; $x++) {
&mod("a");
}
sub mod {
print "before: $_[0]";
$_[0] = "m";
print " after: $_[0]\n";
}
# perl4:
# before: x after: m
# before: a after: m
# before: m after: m
# before: m after: m
# Perl5:
# before: x after: m
# Modification of a read-only value attempted at foo.pl line 12.
# before: a
o "defined $var" behavior changed
The behavior is slightly different for:
print "$x", defined $x
# perl 4: 1
# perl 5: <no output, $x is not called into existence>
o Variable Suicide
Variable suicide behavior is more consistent under Perl
5. Perl5 exhibits the same behavior for hashes and
scalars, that perl4 exhibits for only scalars.
perl v5.12.5 Last change: 2012-11-03 15
Perl Programmers Reference Guide PERLTRAP(1)
$aGlobal{ "aKey" } = "global value";
print "MAIN:", $aGlobal{"aKey"}, "\n";
$GlobalLevel = 0;
&test( *aGlobal );
sub test {
local( *theArgument ) = @_;
local( %aNewLocal ); # perl 4 != 5.001l,m
$aNewLocal{"aKey"} = "this should never appear";
print "SUB: ", $theArgument{"aKey"}, "\n";
$aNewLocal{"aKey"} = "level $GlobalLevel"; # what should print
$GlobalLevel++;
if( $GlobalLevel<4 ) {
&test( *aNewLocal );
}
}
# Perl4:
# MAIN:global value
# SUB: global value
# SUB: level 0
# SUB: level 1
# SUB: level 2
# Perl5:
# MAIN:global value
# SUB: global value
# SUB: this should never appear
# SUB: this should never appear
# SUB: this should never appear
Context Traps - scalar, list contexts
o Elements of argument lists for formats evaluated in
list context
The elements of argument lists for formats are now
evaluated in list context. This means you can
interpolate list values now.
@fmt = ("foo","bar","baz");
format STDOUT=
@<<<<< @||||| @>>>>>
@fmt;
.
write;
# perl4 errors: Please use commas to separate fields in file
# perl5 prints: foo bar baz
o "caller()" returns false value in scalar context if no
caller present
perl v5.12.5 Last change: 2012-11-03 16
Perl Programmers Reference Guide PERLTRAP(1)
The "caller()" function now returns a false value in a
scalar context if there is no caller. This lets
library files determine if they're being required.
caller() ? (print "You rang?\n") : (print "Got a 0\n");
# perl4 errors: There is no caller
# perl5 prints: Got a 0
o Comma operator in scalar context gives scalar context
to args
The comma operator in a scalar context is now
guaranteed to give a scalar context to its arguments.
@y= ('a','b','c');
$x = (1, 2, @y);
print "x = $x\n";
# Perl4 prints: x = c # Thinks list context interpolates list
# Perl5 prints: x = 3 # Knows scalar uses length of list
o "sprintf()" prototyped as "($;@)"
"sprintf()" is prototyped as ($;@), so its first
argument is given scalar context. Thus, if passed an
array, it will probably not do what you want, unlike
Perl 4:
@z = ('%s%s', 'foo', 'bar');
$x = sprintf(@z);
print $x;
# perl4 prints: foobar
# perl5 prints: 3
"printf()" works the same as it did in Perl 4, though:
@z = ('%s%s', 'foo', 'bar');
printf STDOUT (@z);
# perl4 prints: foobar
# perl5 prints: foobar
Precedence Traps
Perl4-to-Perl5 traps involving precedence order.
Perl 4 has almost the same precedence rules as Perl 5 for
the operators that they both have. Perl 4 however, seems to
have had some inconsistencies that made the behavior differ
from what was documented.
perl v5.12.5 Last change: 2012-11-03 17
Perl Programmers Reference Guide PERLTRAP(1)
o LHS vs. RHS of any assignment operator
LHS vs. RHS of any assignment operator. LHS is
evaluated first in perl4, second in perl5; this can
affect the relationship between side-effects in sub-
expressions.
@arr = ( 'left', 'right' );
$a{shift @arr} = shift @arr;
print join( ' ', keys %a );
# perl4 prints: left
# perl5 prints: right
o Semantic errors introduced due to precedence
These are now semantic errors because of precedence:
@list = (1,2,3,4,5);
%map = ("a",1,"b",2,"c",3,"d",4);
$n = shift @list + 2; # first item in list plus 2
print "n is $n, ";
$m = keys %map + 2; # number of items in hash plus 2
print "m is $m\n";
# perl4 prints: n is 3, m is 6
# perl5 errors and fails to compile
o Precedence of assignment operators same as the
precedence of assignment
The precedence of assignment operators is now the same
as the precedence of assignment. Perl 4 mistakenly
gave them the precedence of the associated operator.
So you now must parenthesize them in expressions like
/foo/ ? ($a += 2) : ($a -= 2);
Otherwise
/foo/ ? $a += 2 : $a -= 2
would be erroneously parsed as
(/foo/ ? $a += 2 : $a) -= 2;
On the other hand,
$a += /foo/ ? 1 : 2;
now works as a C programmer would expect.
perl v5.12.5 Last change: 2012-11-03 18
Perl Programmers Reference Guide PERLTRAP(1)
o "open" requires parentheses around filehandle
open FOO || die;
is now incorrect. You need parentheses around the
filehandle. Otherwise, perl5 leaves the statement as
its default precedence:
open(FOO || die);
# perl4 opens or dies
# perl5 opens FOO, dying only if 'FOO' is false, i.e. never
o $: precedence over $:: gone
perl4 gives the special variable, $: precedence, where
perl5 treats $:: as main "package"
$a = "x"; print "$::a";
# perl 4 prints: -:a
# perl 5 prints: x
o Precedence of file test operators documented
perl4 had buggy precedence for the file test operators
vis-a-vis the assignment operators. Thus, although the
precedence table for perl4 leads one to believe "-e
$foo .= "q"" should parse as "((-e $foo) .= "q")", it
actually parses as "(-e ($foo .= "q"))". In perl5, the
precedence is as documented.
-e $foo .= "q"
# perl4 prints: no output
# perl5 prints: Can't modify -e in concatenation
o "keys", "each", "values" are regular named unary
operators
In perl4, keys(), each() and values() were special
high-precedence operators that operated on a single
hash, but in perl5, they are regular named unary
operators. As documented, named unary operators have
lower precedence than the arithmetic and concatenation
operators "+ - .", but the perl4 variants of these
operators actually bind tighter than "+ - .". Thus,
for:
%foo = 1..10;
print keys %foo - 1
perl v5.12.5 Last change: 2012-11-03 19
Perl Programmers Reference Guide PERLTRAP(1)
# perl4 prints: 4
# perl5 prints: Type of arg 1 to keys must be hash (not subtraction)
The perl4 behavior was probably more useful, if less
consistent.
General Regular Expression Traps using s///, etc.
All types of RE traps.
o "s'$lhs'$rhs'" interpolates on either side
"s'$lhs'$rhs'" now does no interpolation on either
side. It used to interpolate $lhs but not $rhs. (And
still does not match a literal '$' in string)
$a=1;$b=2;
$string = '1 2 $a $b';
$string =~ s'$a'$b';
print $string,"\n";
# perl4 prints: $b 2 $a $b
# perl5 prints: 1 2 $a $b
o "m//g" attaches its state to the searched string
"m//g" now attaches its state to the searched string
rather than the regular expression. (Once the scope of
a block is left for the sub, the state of the searched
string is lost)
$_ = "ababab";
while(m/ab/g){
&doit("blah");
}
sub doit{local($_) = shift; print "Got $_ "}
# perl4 prints: Got blah Got blah Got blah Got blah
# perl5 prints: infinite loop blah...
o "m//o" used within an anonymous sub
Currently, if you use the "m//o" qualifier on a regular
expression within an anonymous sub, all closures
generated from that anonymous sub will use the regular
expression as it was compiled when it was used the very
first time in any such closure. For instance, if you
say
perl v5.12.5 Last change: 2012-11-03 20
Perl Programmers Reference Guide PERLTRAP(1)
sub build_match {
my($left,$right) = @_;
return sub { $_[0] =~ /$left stuff $right/o; };
}
$good = build_match('foo','bar');
$bad = build_match('baz','blarch');
print $good->('foo stuff bar') ? "ok\n" : "not ok\n";
print $bad->('baz stuff blarch') ? "ok\n" : "not ok\n";
print $bad->('foo stuff bar') ? "not ok\n" : "ok\n";
For most builds of Perl5, this will print: ok not ok
not ok
build_match() will always return a sub which matches
the contents of $left and $right as they were the first
time that build_match() was called, not as they are in
the current call.
o $+ isn't set to whole match
If no parentheses are used in a match, Perl4 sets $+ to
the whole match, just like $&. Perl5 does not.
"abcdef" =~ /b.*e/;
print "\$+ = $+\n";
# perl4 prints: bcde
# perl5 prints:
o Substitution now returns null string if it fails
substitution now returns the null string if it fails
$string = "test";
$value = ($string =~ s/foo//);
print $value, "\n";
# perl4 prints: 0
# perl5 prints:
Also see "Numerical Traps" for another example of this
new feature.
o "s`lhs`rhs`" is now a normal substitution
"s`lhs`rhs`" (using backticks) is now a normal
substitution, with no backtick expansion
$string = "";
$string =~ s`^`hostname`;
print $string, "\n";
perl v5.12.5 Last change: 2012-11-03 21
Perl Programmers Reference Guide PERLTRAP(1)
# perl4 prints: <the local hostname>
# perl5 prints: hostname
o Stricter parsing of variables in regular expressions
Stricter parsing of variables used in regular
expressions
s/^([^$grpc]*$grpc[$opt$plus$rep]?)//o;
# perl4: compiles w/o error
# perl5: with Scalar found where operator expected ..., near "$opt$plus"
an added component of this example, apparently from the
same script, is the actual value of the s'd string
after the substitution. "[$opt]" is a character class
in perl4 and an array subscript in perl5
$grpc = 'a';
$opt = 'r';
$_ = 'bar';
s/^([^$grpc]*$grpc[$opt]?)/foo/;
print;
# perl4 prints: foo
# perl5 prints: foobar
o "m?x?" matches only once
Under perl5, "m?x?" matches only once, like "?x?".
Under perl4, it matched repeatedly, like "/x/" or
"m!x!".
$test = "once";
sub match { $test =~ m?once?; }
&match();
if( &match() ) {
# m?x? matches more then once
print "perl4\n";
} else {
# m?x? matches only once
print "perl5\n";
}
# perl4 prints: perl4
# perl5 prints: perl5
o Failed matches don't reset the match variables
Unlike in Ruby, failed matches in Perl do not reset the
match variables ($1, $2, ..., "$`", ...).
perl v5.12.5 Last change: 2012-11-03 22
Perl Programmers Reference Guide PERLTRAP(1)
Subroutine, Signal, Sorting Traps
The general group of Perl4-to-Perl5 traps having to do with
Signals, Sorting, and their related subroutines, as well as
general subroutine traps. Includes some OS-Specific traps.
o Barewords that used to look like strings look like
subroutine calls
Barewords that used to look like strings to Perl will
now look like subroutine calls if a subroutine by that
name is defined before the compiler sees them.
sub SeeYa { warn"Hasta la vista, baby!" }
$SIG{'TERM'} = SeeYa;
print "SIGTERM is now $SIG{'TERM'}\n";
# perl4 prints: SIGTERM is now main'SeeYa
# perl5 prints: SIGTERM is now main::1 (and warns "Hasta la vista, baby!")
Use -w to catch this one
o Reverse is no longer allowed as the name of a sort
subroutine
reverse is no longer allowed as the name of a sort
subroutine.
sub reverse{ print "yup "; $a <=> $b }
print sort reverse (2,1,3);
# perl4 prints: yup yup 123
# perl5 prints: 123
# perl5 warns (if using -w): Ambiguous call resolved as CORE::reverse()
o "warn()" won't let you specify a filehandle.
Although it _always_ printed to STDERR, warn() would
let you specify a filehandle in perl4. With perl5 it
does not.
warn STDERR "Foo!";
# perl4 prints: Foo!
# perl5 prints: String found where operator expected
OS Traps
o SysV resets signal handler correctly
Under HPUX, and some other SysV OSes, one had to reset
any signal handler, within the signal handler
function, each time a signal was handled with perl4.
With perl5, the reset is now done correctly. Any code
perl v5.12.5 Last change: 2012-11-03 23
Perl Programmers Reference Guide PERLTRAP(1)
relying on the handler _not_ being reset will have to
be reworked.
Since version 5.002, Perl uses sigaction() under SysV.
sub gotit {
print "Got @_... ";
}
$SIG{'INT'} = 'gotit';
$| = 1;
$pid = fork;
if ($pid) {
kill('INT', $pid);
sleep(1);
kill('INT', $pid);
} else {
while (1) {sleep(10);}
}
# perl4 (HPUX) prints: Got INT...
# perl5 (HPUX) prints: Got INT... Got INT...
o SysV "seek()" appends correctly
Under SysV OSes, "seek()" on a file opened to append
">>" now does the right thing w.r.t. the fopen()
manpage. e.g., - When a file is opened for append, it
is impossible to overwrite information already in the
file.
open(TEST,">>seek.test");
$start = tell TEST;
foreach(1 .. 9){
print TEST "$_ ";
}
$end = tell TEST;
seek(TEST,$start,0);
print TEST "18 characters here";
# perl4 (solaris) seek.test has: 18 characters here
# perl5 (solaris) seek.test has: 1 2 3 4 5 6 7 8 9 18 characters here
Interpolation Traps
Perl4-to-Perl5 traps having to do with how things get
interpolated within certain expressions, statements,
contexts, or whatever.
o "@" always interpolates an array in double-quotish
strings
@ now always interpolates an array in double-quotish
perl v5.12.5 Last change: 2012-11-03 24
Perl Programmers Reference Guide PERLTRAP(1)
strings.
print "To: someone@somewhere.com\n";
# perl4 prints: To:someone@somewhere.com
# perl < 5.6.1, error : In string, @somewhere now must be written as \@somewhere
# perl >= 5.6.1, warning : Possible unintended interpolation of @somewhere in string
o Double-quoted strings may no longer end with an
unescaped $
Double-quoted strings may no longer end with an
unescaped $.
$foo = "foo$";
print "foo is $foo\n";
# perl4 prints: foo is foo$
# perl5 errors: Final $ should be \$ or $name
Note: perl5 DOES NOT error on the terminating @ in $bar
o Arbitrary expressions are evaluated inside braces
within double quotes
Perl now sometimes evaluates arbitrary expressions
inside braces that occur within double quotes (usually
when the opening brace is preceded by "$" or "@").
@www = "buz";
$foo = "foo";
$bar = "bar";
sub foo { return "bar" };
print "|@{w.w.w}|${main'foo}|";
# perl4 prints: |@{w.w.w}|foo|
# perl5 prints: |buz|bar|
Note that you can "use strict;" to ward off such
trappiness under perl5.
o $$x now tries to dereference $x
The construct "this is $$x" used to interpolate the pid
at that point, but now tries to dereference $x. $$ by
itself still works fine, however.
$s = "a reference";
$x = *s;
print "this is $$x\n";
# perl4 prints: this is XXXx (XXX is the current pid)
perl v5.12.5 Last change: 2012-11-03 25
Perl Programmers Reference Guide PERLTRAP(1)
# perl5 prints: this is a reference
o Creation of hashes on the fly with "eval "EXPR""
requires protection
Creation of hashes on the fly with "eval "EXPR"" now
requires either both "$"'s to be protected in the
specification of the hash name, or both curlies to be
protected. If both curlies are protected, the result
will be compatible with perl4 and perl5. This is a
very common practice, and should be changed to use the
block form of "eval{}" if possible.
$hashname = "foobar";
$key = "baz";
$value = 1234;
eval "\$$hashname{'$key'} = q|$value|";
(defined($foobar{'baz'})) ? (print "Yup") : (print "Nope");
# perl4 prints: Yup
# perl5 prints: Nope
Changing
eval "\$$hashname{'$key'} = q|$value|";
to
eval "\$\$hashname{'$key'} = q|$value|";
causes the following result:
# perl4 prints: Nope
# perl5 prints: Yup
or, changing to
eval "\$$hashname\{'$key'\} = q|$value|";
causes the following result:
# perl4 prints: Yup
# perl5 prints: Yup
# and is compatible for both versions
o Bugs in earlier perl versions
perl4 programs which unconsciously rely on the bugs in
earlier perl versions.
perl -e '$bar=q/not/; print "This is $foo{$bar} perl5"'
perl v5.12.5 Last change: 2012-11-03 26
Perl Programmers Reference Guide PERLTRAP(1)
# perl4 prints: This is not perl5
# perl5 prints: This is perl5
o Array and hash brackets during interpolation
You also have to be careful about array and hash
brackets during interpolation.
print "$foo["
perl 4 prints: [
perl 5 prints: syntax error
print "$foo{"
perl 4 prints: {
perl 5 prints: syntax error
Perl 5 is expecting to find an index or key name
following the respective brackets, as well as an ending
bracket of the appropriate type. In order to mimic the
behavior of Perl 4, you must escape the bracket like
so.
print "$foo\[";
print "$foo\{";
o Interpolation of "\$$foo{bar}"
Similarly, watch out for: "\$$foo{bar}"
$foo = "baz";
print "\$$foo{bar}\n";
# perl4 prints: $baz{bar}
# perl5 prints: $
Perl 5 is looking for $foo{bar} which doesn't exist,
but perl 4 is happy just to expand $foo to "baz" by
itself. Watch out for this especially in "eval"'s.
o "qq()" string passed to "eval" will not find string
terminator
"qq()" string passed to "eval"
eval qq(
foreach \$y (keys %\$x\) {
\$count++;
}
);
perl v5.12.5 Last change: 2012-11-03 27
Perl Programmers Reference Guide PERLTRAP(1)
# perl4 runs this ok
# perl5 prints: Can't find string terminator ")"
DBM Traps
General DBM traps.
o Perl5 must have been linked with same dbm/ndbm as the
default for "dbmopen()"
Existing dbm databases created under perl4 (or any
other dbm/ndbm tool) may cause the same script, run
under perl5, to fail. The build of perl5 must have
been linked with the same dbm/ndbm as the default for
"dbmopen()" to function properly without "tie"'ing to
an extension dbm implementation.
dbmopen (%dbm, "file", undef);
print "ok\n";
# perl4 prints: ok
# perl5 prints: ok (IFF linked with -ldbm or -lndbm)
o DBM exceeding limit on the key/value size will cause
perl5 to exit immediately
Existing dbm databases created under perl4 (or any
other dbm/ndbm tool) may cause the same script, run
under perl5, to fail. The error generated when
exceeding the limit on the key/value size will cause
perl5 to exit immediately.
dbmopen(DB, "testdb",0600) || die "couldn't open db! $!";
$DB{'trap'} = "x" x 1024; # value too large for most dbm/ndbm
print "YUP\n";
# perl4 prints:
dbm store returned -1, errno 28, key "trap" at - line 3.
YUP
# perl5 prints:
dbm store returned -1, errno 28, key "trap" at - line 3.
Unclassified Traps
Everything else.
o "require"/"do" trap using returned value
If the file doit.pl has:
perl v5.12.5 Last change: 2012-11-03 28
Perl Programmers Reference Guide PERLTRAP(1)
sub foo {
$rc = do "./do.pl";
return 8;
}
print &foo, "\n";
And the do.pl file has the following single line:
return 3;
Running doit.pl gives the following:
# perl 4 prints: 3 (aborts the subroutine early)
# perl 5 prints: 8
Same behavior if you replace "do" with "require".
o "split" on empty string with LIMIT specified
$string = '';
@list = split(/foo/, $string, 2)
Perl4 returns a one element list containing the empty
string but Perl5 returns an empty list.
As always, if any of these are ever officially declared as
bugs, they'll be fixed and removed.
ATTRIBUTES
See attributes(5) for descriptions of the following
attributes:
+---------------+------------------+
|ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+---------------+------------------+
|Availability | runtime/perl-512 |
+---------------+------------------+
|Stability | Uncommitted |
+---------------+------------------+
NOTES
This software was built from source available at
https://java.net/projects/solaris-userland. The original
community source was downloaded from
http://www.cpan.org/src/5.0/perl-5.12.5.tar.bz2
Further information about this software can be found on the
open source community website at http://www.perl.org/.
perl v5.12.5 Last change: 2012-11-03 29