Install the PCI Mezzanine

1. Position the PCI mezzanine onto the chassis.
2. Lower the PCI mezzanine and slide it toward the front of server, ensuring that it is fully seated on the PCI risers.
   
3. Using a No. 2 Phillips screwdriver, tighten the four PCI mezzanine screws.
4. Reconnect the following PCI mezzanine cables.

   • LED board cable

   • Fan tray 1 power cable

   • Power cable from PDB

   • Internal SAS HBA cable

   • Fan tray 2 power cable

   Figure 11  Reconnecting PCI Mezzanine Cables

   

   Figure Legend

   1 Power cable from the PDB

   2Internal SAS HBA cable

   3Fan tray 1 power cable

   4Fan tray 2 power cable

   5Front indicator board cable

   
   
   
5. If you removed any internal cables from installed PCIe2 cards prior to removing the PCI mezzanine, reconnect these cables to the cards.
6. Return the server to operation.

   See Returning Server to Operation.

Related Information

• Remove the PCI Mezzanine

• Replacing PCIe2 Risers

• Replacing PCIe2 Cards in Slots 4 and 5