-
Prepare
the server for service.
See Preparing the Server for Component Replacement.
- With the PCI mezzanine installed
and cabled, determine which slot to install the card.
- Remove the replacement card from
its packaging and place it onto an antistatic mat.
- If a filler panel is installed,
remove it by pulling the tab.
Note - Save this filler panel in case you ever need to remove
the PCIe2 card from the system.
- Lower the card into position
on the PCI mezzanine, then slide the card to the right to seat it
into the connector.
- If required by your PCIe2 card,
connect any internal cable to the card.
- Return the server to operation.
See Returning Server to Operation.
- Connect any external cable to
the PCIe2 card.
Refer to your PCIe2 card documentation for more information.