Power Down Server Gracefully

Performing a graceful shut down ensures that all of your data is saved and the system is ready for restart.

1. Log in to the server as superuser or equivalent.

   Depending on the nature of the problem, you might want to view the system status, the log files, or run diagnostics before you shut down the system. See View Event Logs for log file information.

2. Notify affected users.

   Refer to your operating system documentation for specific instructions.

3. Save any open files and quit all running programs.

   Refer to your application documentation for specific information on these processes.

4. Log in to the ILOM SP to display the ILOM prompt.

   Refer to the ILOM 3.0 documentation for instructions.

5. At the ILOM prompt, shut down the operating system:

   -> stop /SYS
   SC Alert: SC Request to Power Off Host.
   

   If the system is running the Solaris OS, refer to the Solaris system administration documentation for additional information.

6. Shut down the chassis power:

   -> stop /SP
   SP Alert: SP Request to Power Off Chassis.
   

   Refer to the ILOM 3.0 documentation for more information about the stop command.

   ---

   Note - You can also use the Power button on the front of the server to initiate a graceful system shutdown. This button is recessed to prevent accidental server power off. Use the tip of a pen to operate this button.

   ---

7. Disconnect the power and cables from the server.

   See Disconnect Cables From the Server.

Related Information

• Power Down Server Gracefully Using the Power Button

• Power Down Server For an Emergency

• Disconnect Cables From the Server

• Power On the Server