- Prepare
the server for service.
See Preparing the Server for Component Replacement.
- Remove the PCI mezzanine.
See Remove the PCI Mezzanine.
- Select the PCIe2 riser that you
want to remove.
See PCIe2 Riser Location and Differences.
- If there is a PCIe2 card installed
in the riser, disconnect any external or internal cables from the
card.
- Use a No. 2 Phillips screwdriver
to loosen the three green captive screws securing the riser to the
system.
One internal captive screw secures the riser to the motherboard
and two external screws secure the riser to rear panel.
- Lift the PCIe2 riser out of the
server.
If there is a PCIe2 card installed in the riser, place the
riser an antistatic mat. Note in which slot the PCIe riser was originally
installed.