- Remove
the replacement air duct from its packaging.
- With the duct at a 45-degree
angle, position the pin holes in the duct to align with the pins
of the chassis.
- Lower the duct to the horizontal
position until the tab secures in place.
Ensure that the LED board cable is securely connected to the
PCI mezzanine and is routed beneath the air duct.
- Reconnect the fan tray 0 power
cable to the PCI Mezzanine.
Route cable through the retention clips on top of the air
duct.
- Replace any full-length, full-height
PCIe2 cards to the PCI mezzanine.
Reconnect any internal cables connected to these PCIe2 cards.
See Install PCIe2 Cards Into Slots 4 and 5.
- Consider your next step:
If you installed the air duct as part
of another procedure, return to that procedure.
Otherwise, continue with this task.
- Install the PCI mezzanine.
See Install the PCI Mezzanine.
- Return the server to operation.
See Returning Server to Operation.