Go to main content

man pages section 1: User Commands

Exit Print View

Updated: Wednesday, July 27, 2022
 
 

perlclib (1)

Name

perlclib - Internal replacements for standard C library functions

Synopsis

Please see following description for synopsis

Description

Perl Programmers Reference Guide                                   PERLCLIB(1)



NAME
       perlclib - Internal replacements for standard C library functions

DESCRIPTION
       One thing Perl porters should note is that perl doesn't tend to use
       that much of the C standard library internally; you'll see very little
       use of, for example, the ctype.h functions in there. This is because
       Perl tends to reimplement or abstract standard library functions, so
       that we know exactly how they're going to operate.

       This is a reference card for people who are familiar with the C library
       and who want to do things the Perl way; to tell them which functions
       they ought to use instead of the more normal C functions.

   Conventions
       In the following tables:

       "t"
          is a type.

       "p"
          is a pointer.

       "n"
          is a number.

       "s"
          is a string.

       "sv", "av", "hv", etc. represent variables of their respective types.

   File Operations
       Instead of the stdio.h functions, you should use the Perl abstraction
       layer. Instead of "FILE*" types, you need to be handling "PerlIO*"
       types.  Don't forget that with the new PerlIO layered I/O abstraction
       "FILE*" types may not even be available. See also the "perlapio"
       documentation for more information about the following functions:

        Instead Of:                 Use:

        stdin                       PerlIO_stdin()
        stdout                      PerlIO_stdout()
        stderr                      PerlIO_stderr()

        fopen(fn, mode)             PerlIO_open(fn, mode)
        freopen(fn, mode, stream)   PerlIO_reopen(fn, mode, perlio) (Dep-
                                      recated)
        fflush(stream)              PerlIO_flush(perlio)
        fclose(stream)              PerlIO_close(perlio)

   File Input and Output
        Instead Of:                 Use:

        fprintf(stream, fmt, ...)   PerlIO_printf(perlio, fmt, ...)

        [f]getc(stream)             PerlIO_getc(perlio)
        [f]putc(stream, n)          PerlIO_putc(perlio, n)
        ungetc(n, stream)           PerlIO_ungetc(perlio, n)

       Note that the PerlIO equivalents of "fread" and "fwrite" are slightly
       different from their C library counterparts:

        fread(p, size, n, stream)   PerlIO_read(perlio, buf, numbytes)
        fwrite(p, size, n, stream)  PerlIO_write(perlio, buf, numbytes)

        fputs(s, stream)            PerlIO_puts(perlio, s)

       There is no equivalent to "fgets"; one should use "sv_gets" instead:

        fgets(s, n, stream)         sv_gets(sv, perlio, append)

   File Positioning
        Instead Of:                 Use:

        feof(stream)                PerlIO_eof(perlio)
        fseek(stream, n, whence)    PerlIO_seek(perlio, n, whence)
        rewind(stream)              PerlIO_rewind(perlio)

        fgetpos(stream, p)          PerlIO_getpos(perlio, sv)
        fsetpos(stream, p)          PerlIO_setpos(perlio, sv)

        ferror(stream)              PerlIO_error(perlio)
        clearerr(stream)            PerlIO_clearerr(perlio)

   Memory Management and String Handling
        Instead Of:                    Use:

        t* p = malloc(n)               Newx(p, n, t)
        t* p = calloc(n, s)            Newxz(p, n, t)
        p = realloc(p, n)              Renew(p, n, t)
        memcpy(dst, src, n)            Copy(src, dst, n, t)
        memmove(dst, src, n)           Move(src, dst, n, t)
        memcpy(dst, src, sizeof(t))    StructCopy(src, dst, t)
        memset(dst, 0, n * sizeof(t))  Zero(dst, n, t)
        memzero(dst, 0)                Zero(dst, n, char)
        free(p)                        Safefree(p)

        strdup(p)                      savepv(p)
        strndup(p, n)                  savepvn(p, n) (Hey, strndup doesn't
                                                      exist!)

        strstr(big, little)            instr(big, little)
        strcmp(s1, s2)                 strLE(s1, s2) / strEQ(s1, s2)
                                                     / strGT(s1,s2)
        strncmp(s1, s2, n)             strnNE(s1, s2, n) / strnEQ(s1, s2, n)

        memcmp(p1, p2, n)              memNE(p1, p2, n)
        !memcmp(p1, p2, n)             memEQ(p1, p2, n)

       Notice the different order of arguments to "Copy" and "Move" than used
       in "memcpy" and "memmove".

       Most of the time, though, you'll want to be dealing with SVs internally
       instead of raw "char *" strings:

        strlen(s)                   sv_len(sv)
        strcpy(dt, src)             sv_setpv(sv, s)
        strncpy(dt, src, n)         sv_setpvn(sv, s, n)
        strcat(dt, src)             sv_catpv(sv, s)
        strncat(dt, src)            sv_catpvn(sv, s)
        sprintf(s, fmt, ...)        sv_setpvf(sv, fmt, ...)

       Note also the existence of "sv_catpvf" and "sv_vcatpvfn", combining
       concatenation with formatting.

       Sometimes instead of zeroing the allocated heap by using Newxz() you
       should consider "poisoning" the data.  This means writing a bit pattern
       into it that should be illegal as pointers (and floating point
       numbers), and also hopefully surprising enough as integers, so that any
       code attempting to use the data without forethought will break sooner
       rather than later.  Poisoning can be done using the Poison() macros,
       which have similar arguments to Zero():

        PoisonWith(dst, n, t, b)    scribble memory with byte b
        PoisonNew(dst, n, t)        equal to PoisonWith(dst, n, t, 0xAB)
        PoisonFree(dst, n, t)       equal to PoisonWith(dst, n, t, 0xEF)
        Poison(dst, n, t)           equal to PoisonFree(dst, n, t)

   Character Class Tests
       There are several types of character class tests that Perl implements.
       The only ones described here are those that directly correspond to C
       library functions that operate on 8-bit characters, but there are
       equivalents that operate on wide characters, and UTF-8 encoded strings.
       All are more fully described in "Character classification" in perlapi
       and "Character case changing" in perlapi.

       The C library routines listed in the table below return values based on
       the current locale.  Use the entries in the final column for that
       functionality.  The other two columns always assume a POSIX (or C)
       locale.  The entries in the ASCII column are only meaningful for ASCII
       inputs, returning FALSE for anything else.  Use these only when you
       know that is what you want.  The entries in the Latin1 column assume
       that the non-ASCII 8-bit characters are as Unicode defines, them, the
       same as ISO-8859-1, often called Latin 1.

        Instead Of:  Use for ASCII:   Use for Latin1:      Use for locale:

        isalnum(c)  isALPHANUMERIC(c) isALPHANUMERIC_L1(c) isALPHANUMERIC_LC(c)
        isalpha(c)  isALPHA(c)        isALPHA_L1(c)        isALPHA_LC(u )
        isascii(c)  isASCII(c)                             isASCII_LC(c)
        isblank(c)  isBLANK(c)        isBLANK_L1(c)        isBLANK_LC(c)
        iscntrl(c)  isCNTRL(c)        isCNTRL_L1(c)        isCNTRL_LC(c)
        isdigit(c)  isDIGIT(c)        isDIGIT_L1(c)        isDIGIT_LC(c)
        isgraph(c)  isGRAPH(c)        isGRAPH_L1(c)        isGRAPH_LC(c)
        islower(c)  isLOWER(c)        isLOWER_L1(c)        isLOWER_LC(c)
        isprint(c)  isPRINT(c)        isPRINT_L1(c)        isPRINT_LC(c)
        ispunct(c)  isPUNCT(c)        isPUNCT_L1(c)        isPUNCT_LC(c)
        isspace(c)  isSPACE(c)        isSPACE_L1(c)        isSPACE_LC(c)
        isupper(c)  isUPPER(c)        isUPPER_L1(c)        isUPPER_LC(c)
        isxdigit(c) isXDIGIT(c)       isXDIGIT_L1(c)       isXDIGIT_LC(c)

        tolower(c)  toLOWER(c)        toLOWER_L1(c)        toLOWER_LC(c)
        toupper(c)  toUPPER(c)                             toUPPER_LC(c)

       To emphasize that you are operating only on ASCII characters, you can
       append "_A" to each of the macros in the ASCII column: "isALPHA_A",
       "isDIGIT_A", and so on.

       (There is no entry in the Latin1 column for "isascii" even though there
       is an "isASCII_L1", which is identical to "isASCII";  the latter name
       is clearer.  There is no entry in the Latin1 column for "toupper"
       because the result can be non-Latin1.  You have to use "toUPPER_uni",
       as described in "Character case changing" in perlapi.)

   stdlib.h functions
        Instead Of:                 Use:

        atof(s)                     Atof(s)
        atoi(s)                     grok_atoUV(s, &uv, &e)
        atol(s)                     grok_atoUV(s, &uv, &e)
        strtod(s, &p)               Strtod(s, &p)
        strtol(s, &p, n)            Strtol(s, &p, b)
        strtoul(s, &p, n)           Strtoul(s, &p, b)

       Typical use is to do range checks on "uv" before casting:

         int i; UV uv;
         char* end_ptr = input_end;
         if (grok_atoUV(input, &uv, &end_ptr)
             && uv <= INT_MAX)
           i = (int)uv;
           ... /* continue parsing from end_ptr */
         } else {
           ... /* parse error: not a decimal integer in range 0 .. MAX_IV */
         }

       Notice also the "grok_bin", "grok_hex", and "grok_oct" functions in
       numeric.c for converting strings representing numbers in the respective
       bases into "NV"s.  Note that grok_atoUV() doesn't handle negative
       inputs, or leading whitespace (being purposefully strict).

       Note that strtol() and strtoul() may be disguised as Strtol(),
       Strtoul(), Atol(), Atoul().  Avoid those, too.

       In theory "Strtol" and "Strtoul" may not be defined if the machine perl
       is built on doesn't actually have strtol and strtoul. But as those 2
       functions are part of the 1989 ANSI C spec we suspect you'll find them
       everywhere by now.

        int rand()                  double Drand01()
        srand(n)                    { seedDrand01((Rand_seed_t)n);
                                      PL_srand_called = TRUE; }

        exit(n)                     my_exit(n)
        system(s)                   Don't. Look at pp_system or use my_popen.

        getenv(s)                   PerlEnv_getenv(s)
        setenv(s, val)              my_setenv(s, val)

   Miscellaneous functions
       You should not even want to use setjmp.h functions, but if you think
       you do, use the "JMPENV" stack in scope.h instead.

       For "signal"/"sigaction", use "rsignal(signo, handler)".


ATTRIBUTES
       See attributes(7) for descriptions of the following attributes:


       +---------------+-----------------------+
       |ATTRIBUTE TYPE |   ATTRIBUTE VALUE     |
       +---------------+-----------------------+
       |Availability   | runtime/perl-532      |
       +---------------+-----------------------+
       |Stability      | Pass-through volatile |
       +---------------+-----------------------+

SEE ALSO
       perlapi, perlapio, perlguts



NOTES
       Source code for open source software components in Oracle Solaris can
       be found at https://www.oracle.com/downloads/opensource/solaris-source-
       code-downloads.html.

       This software was built from source available at
       https://github.com/oracle/solaris-userland.  The original community
       source was downloaded from
       http://www.cpan.org/src/5.0/perl-5.32.0.tar.gz.

       Further information about this software can be found on the open source
       community website at https://www.perl.org/.



perl v5.32.0                      2020-06-14                       PERLCLIB(1)