Go to main content

man pages section 1: User Commands

Exit Print View

Updated: Thursday, June 13, 2019
 
 

webalizer (1)

Name

webalizer - A web server log file analysis tool.

Synopsis

webalizer [ option ... ] [ log-file ]

webazolver [ option ... ] [ log-file ]

Description

webalizer(1)                     The Webalizer                    webalizer(1)



NAME
       webalizer - A web server log file analysis tool.

SYNOPSIS
       webalizer [ option ... ] [ log-file ]

       webazolver [ option ... ] [ log-file ]

DESCRIPTION
       The  Webalizer is a web server log file analysis program which produces
       usage statistics in HTML  format  for  viewing  with  a  browser.   The
       results  are  presented  in  both  columnar and graphical format, which
       facilitates interpretation.  Yearly, monthly, daily  and  hourly  usage
       statistics  are  presented,  along with the ability to display usage by
       site, URL, referrer, user agent (browser),  username,  search  strings,
       entry/exit  pages,   and country (some information may not be available
       if not present in the log file being processed).

       The Webalizer supports CLF (common log format) log files,  as  well  as
       Combined  log  formats as defined by NCSA and others, and variations of
       these which it attempts to  handle  intelligently.   In  addition,  the
       Webalizer  supports xferlog formatted (FTP) log files, squid proxy logs
       and W3C extended format logs.  Logs may also be  compressed,  via  gzip
       (.gz)  or,  if  enabled at compile time, bzip2 (.bz2).  If a compressed
       log file is detected, it will be automatically uncompressed while it is
       read.   Compressed logs must have the standard gzip extension of .gz or
       bzip2 extension of .bz2.

       webazolver is normally just a symbolic link to the Webalizer.  When run
       as  webazolver,  only  DNS file creation/updates are performed, and the
       program will exit once complete.  All normal options and  configuration
       directives  are available, however many will not be used.  In addition,
       a DNS cache file must be specified.  If the number of DNS children pro-
       cesses to use are not specified, the webazolver will default to 5.

       This documentation applies to The Webalizer Version 2.23

RUNNING THE WEBALIZER
       The Webalizer was designed to be run from a Unix command line prompt or
       as a crond(8) job. Once executed, the general flow of the program is:

       o       A default configuration file is  scanned  for.   A  file  named
               webalizer.conf is searched for in the current directory, and if
               found, and is owned by the invoking user, then  its  configura-
               tion data is parsed.  If the file is not present in the current
               directory,  the file /etc/webalizer.conf is searched  for  and,
               if found, is used instead.

       o       Any  command  line  arguments  given to the program are parsed.
               This may include the specification  of  a  configuration  file,
               which is processed at the time it is encountered.

       o       If  a  log  file was specified, it is opened and made ready for
               processing.  If no log file was given, STDIN is used for input.
               If the log filename '-' is specified, STDIN will be forced.

       o       If  an  output  directory  was  specified,  the  program does a
               chdir(2) to that directory in preparation for  generating  out-
               put.   If  no output directory was given, the current directory
               is used.

       o       If a non-zero number of DNS Children processes were  specified,
               they  will  be started, and the specified log file will be pro-
               cessed, creating or updating the specified DNS cache file.

       o       If no hostname was given, the program attempts to get the host-
               name using a uname(2) system call.  If that fails, localhost is
               used.

       o       A history file is searched for in the current directory (output
               directory)  and read if found.  This file keeps totals for pre-
               vious months, which is used in the main index.html  HTML  docu-
               ment.   Note:  The  file location can now be specified with the
               HistoryName configuration option.

       o       If  incremental  processing  was  specified,  a  data  file  is
               searched  for  and  loaded  if  found, containing the 'internal
               state' data of the program at the end of a previous run.  Note:
               The file location can now be specified with the IncrementalName
               configuration option.

       o       Main processing begins on the log file.  If the log spans  mul-
               tiple  months,  a  separate  HTML  document is created for each
               month.

       o       After main processing, the main  index.html  page  is  created,
               which  has  totals by month and links to each months HTML docu-
               ment.

       o       A new history file is saved to disk, which includes totals gen-
               erated by The Webalizer during the current run.

       o       If incremental processing was specified, a data file is written
               that contains the 'internal state' data at the end of this run.

INCREMENTAL PROCESSING
       The Webalizer supports incremental run capability.   Simply  put,  this
       allows  processing  large  log  files  by breaking them up into smaller
       pieces, and processing these pieces instead.  What this means  in  real
       terms  is  that you can now rotate your log files as often as you want,
       and still be able to produce monthly usage statistics without the  loss
       of  any detail.  Basically, The Webalizer saves and restores all inter-
       nal data in a file named webalizer.current.  This allows the program to
       'start  where  it left off' so to speak, and allows the preservation of
       detail from one run to the next.  The data file is placed in  the  cur-
       rent  output  directory,  and  is  a  plain ASCII text file that can be
       viewed with any standard text editor.  It's location and  name  may  be
       changed using the IncrementalName configuration keyword.

       Some  special  precautions  need to be taken when using the incremental
       run capability of The Webalizer.  Configuration options should  not  be
       changed  between  runs,  as that could cause corruption of the internal
       data stored.  For example, changing the MangleAgents level  will  cause
       different  representations  of  user  agents  to  be  stored, producing
       invalid results in the user agents section of the report.  If you  need
       to  change  configuration  options, do it at the end of the month after
       normal processing of the previous month and before processing the  cur-
       rent  month.  You may also want to delete the webalizer.current file as
       well.

       The Webalizer also attempts to  prevent  data  duplication  by  keeping
       track of the timestamp of the last record processed.  This timestamp is
       then compared to current records being processed, and any records  that
       were  logged  previous to that timestamp are ignored.  This, in theory,
       should allow you to re-process logs that have already  been  processed,
       or  process  logs  that  contain  a  mix of processed/not yet processed
       records, and not produce duplication of statistics.  The only time this
       may  break  is  if  you  have  duplicate timestamps in two separate log
       files... any records in the second log file that do have the same time-
       stamp  as  the  last record in the previous log file processed, will be
       discarded as if they had already been processed.   There  are  lots  of
       ways  to  prevent  this  however,  for example, stopping the web server
       before rotating logs will prevent  this  situation.   This  setup  also
       necessitates  that you always process logs in chronological order, oth-
       erwise data loss will occur as a result of the timestamp compare.

REVERSE DNS LOOKUPS
       The Webalizer fully supports IPv4 and IPv6 DNS lookups, and maintains a
       cache  of those lookups to reduce processing the same addresses in sub-
       sequent runs.  The cache file can be created at  run-time,  or  may  be
       created  before  running  the  webalizer  using  either the stand alone
       'webazolver' program, or The Webalizer (DNS) Cache file manager program
       'wcmgr'.   In order to perform reverse lookups, a DNSCache file must be
       specified, either on the command line or in a configuration  file.   In
       order  to  create/update  the  cache  file  at  run-time, the number of
       DNSChildren must also be specified, and can be anything between  1  and
       100.   This  specifies the number of child processes to be forked, each
       of which will perform network DNS queries in order  to  lookup  up  the
       addresses  and  update the cache.  Cached entries that are older than a
       specified TTL (time to live) will be expired, and if encountered  again
       in  a  log,  will  be looked up at that time in order to 'freshen' them
       (verify the name is still the same  and  update  its  timestamp).   The
       default TTL is 7 days, however may be set to anything between 1 and 100
       days.  Using the 'wcmgr' program, entries may also be marked as 'perma-
       nent',  in  which  case they will persist (with an infinite TTL) in the
       cache until manually removed.  See the file DNS.README  for  additional
       information and examples.

GEOLOCATION LOOKUPS
       The  Webalizer  has  the  ability  to perform geolocation lookups on IP
       addresses using either it's own internal GeoDB database,  or optionally
       the  GeoIP  database  from  MaxMind,  Inc. (www.maxmind.com).  If used,
       unresolved addresses will be searched for in the database and its coun-
       try  of  origin will be returned if found.  This actually produces more
       accurate Country information than DNS lookups, since  the  DNS  address
       space  has  additional gcTLDs that do not necessarily map to a specific
       country (such as .net and .com).   It  is  possible  to  use  both  DNS
       lookups  and geolocation lookups at the same time, which will cause any
       addresses that could not be resolved  using  DNS  lookups  to  then  be
       looked up in the database, greatly reducing the number of Unknown/Unre-
       solved entries in the generated reports.  The native GeoDB  geolocation
       database  provided  by  The Webalizer fully supports both IPv4 and IPv6
       lookups, is updated regularly and is the preferred  geolocation  method
       for  use  with The Webalizer.  The most current version of the database
       can be obtained from our ftp site (ftp://ftp.mrunix.net/).

COMMAND LINE OPTIONS
       The Webalizer supports many different configuration options  that  will
       alter  the way the program behaves and generates output.  Most of these
       can be specified on the command line, while some can only be  specified
       in  a  configuration  file.  The command line options are listed below,
       with references to the corresponding configuration file keywords.

       General Options

       -h      Display all available command line options and exit program.

       -v      Be verbose.  Will cause the program to output informational and
               Debug messages at run-time.

       -V      Display  the program version and exit.  Additional program spe-
               cific information will be displayed if  verbose  mode  is  also
               used  (e.g.  '-vV'),  which  can  be useful when submitting bug
               reports.

       -d      Debug.  Display debugging information for errors and warnings.

       -i      IgnoreHist.  Ignore history.  USE WITH CAUTION. This will cause
               The Webalizer to ignore any previous monthly history file only.
               Incremental data (if present) is still processed.

       -b      IgnoreState.  Ignore incremental data file.  USE WITH  CAUTION.
               This  will cause The Webalizer to ignore any existing incremen-
               tal data file.  By ignoring the incremental data file, all pre-
               vious  processing  for the current month will be lost and those
               logs must be re-processed.

       -p      Incremental.  Preserve internal data between runs.

       -q      Quiet.  Suppress informational  messages.   Does  not  suppress
               warnings or errors.

       -Q      ReallyQuiet.   Suppress  all  messages  including  warnings and
               errors.

       -T      TimeMe.  Force display of timing information at end of process-
               ing.

       -c file Use configuration file file.

       -n name HostName.  Use the hostname name.

       -o dir  OutputDir.  Use output directory dir.

       -t name ReportTitle.  Use name for report title.

       -F ( clf | ftp | squid | w3c )
               LogType.   Specify  log  type  to  be  processed.  Value can be
               either clf, ftp, squid or w3c format.  If not  specified,  will
               default  to  CLF  format.  FTP logs must be in standard wu-ftpd
               xferlog format.

       -f      FoldSeqErr.  Fold out of sequence log records back into  analy-
               sis, by treating as if they were the same date/time as the last
               good record.  Normally, out of sequence log records are  simply
               ignored.

       -Y      CountryGraph. Suppress country graph.

       -G      HourlyGraph.  Suppress hourly graph.

       -x name HTMLExtension.   Defines  HTML  file  extension to use.  If not
               specified, defaults  to  html.   Do  not  include  the  leading
               period.

       -H      HourlyStats.  Suppress hourly statistics.

       -K num  IndexMonths.   Specify  how  many months should be displayed in
               the main index (yearly summary) table.  Default is  12  months.
               Can  be  set  to  anything  between  12 and 120 months (1 to 10
               years).

       -k num  GraphMonths.  Specify how many months should  be  displayed  in
               the  main  index (yearly summary) graph.  Default is 12 months.
               Can be set to anything between 12 and 72 months (1 to 6 years).

       -L      GraphLegend.  Suppress color coded graph legends.

       -l num  GraphLines.  Specify number of background lines. Default is  2.
               Use zero ('0') to disable the lines.

       -P name PageType.   Specify  file extensions that are considered pages.
               Sometimes referred to as pageviews.

       -O name OmitPage.  Specify URLs to exclude from being counted as pages.

       -m num  VisitTimeout.  Specify the Visit timeout period.  Specified  in
               number of seconds.  Default is 1800 seconds (30 minutes).

       -I name IndexAlias.   Use  the filename name as an additional alias for
               index..

       -M num  MangleAgents.  Mangle user agent names according to the  mangle
               level specified by num.  Mangle levels are:

               5           Browser name and major version.

               4           Browser name, major and minor version.

               3           Browser  name,  major version, minor version to two
                           decimal places.

               2           Browser name, major and minor versions and sub-ver-
                           sion.

               1           Browser name, version and machine type if possible.

               0           All information (left unchanged).

       -g num  GroupDomains.  Automatically group sites by domain.  The group-
               ing level specified by num can be thought of as 'the number  of
               dots'  to display in the grouping.  The default value of 0 dis-
               ables any domain grouping.

       -D name DNSCache.  Use the DNS cache file name.

       -N num  DNSChildren.  Use num DNS children  processes  to  perform  DNS
               lookups, either creating or updating the DNS cache file.  Spec-
               ify zero (0) to disable cache file creation/updates.  If given,
               a DNS cache filename must be specified.

       -j      Enable GeoDB.  This enables the internal GeoDB geolocation ser-
               vices provided by The Webalizer.

       -J name GeoDBDatabase.  Use the alternate GeoDB database name.

       -w      Enable GeoIP.  Enables GeoIP (by MaxMind Inc.) geolocation ser-
               vices.   If  native  GeoDB services are also enabled, then this
               option will have no effect.

       -W name GeoIPDatabase.  Use the alternate GeoIP database name.

       -z name FlagDir.  Specify location of the  country  flag  graphics  and
               enable  their  display in the top country table.  The directory
               name is relative to the output directory being used  unless  an
               absolute path is given (ie: starts with a leading '/').

       Hide Options

       -a name HideAgent.  Hide user agents matching name.

       -r name HideReferrer.  Hide referrer matching name.

       -s name HideSite.  Hide site matching name.

       -X      HideAllSites.  Hide all individual sites (only display groups).

       -u name HideURL.  Hide URL matching name.

       Table size options

       -A num  TopAgents.  Display the top num user agents table.

       -R num  TopReferrers.  Display the top num referrers table.

       -S num  TopSites.  Display the top num sites table.

       -U num  TopURLs.  Display the top num URLs table.

       -C num  TopCountries.  Display the top num countries table.

       -e num  TopEntry.  Display the top num entry pages table.

       -E num  TopExit.  Display the top num exit pages table.

CONFIGURATION FILES
       Configuration  files  are standard ASCII(7) text files that may be cre-
       ated or edited using any standard editor.  Blank lines and  lines  that
       begin with a pound sign ('#') are ignored.  Any other lines are consid-
       ered to be configuration lines, and  have  the  form  "Keyword  Value",
       where  the  'Keyword'  is  one of the currently available configuration
       keywords defined below, and 'Value' is the value to assign to that par-
       ticular  option.  Any text found after the keyword up to the end of the
       line is considered the keyword's value, so you should not include  any-
       thing  after  the actual value on the line that is not actually part of
       the value being assigned.  The file sample.conf provided with the  dis-
       tribution contains lots of useful documentation and examples as well.

       General Configuration Keywords

       LogFile name
               Use  log  file  named  name.   If none specified, STDIN will be
               used.

       LogType name
               Specify log file type as name. Values can be either clf, squid,
               ftp or w3c, with the default being clf.

       OutputDir dir
               Create  output  in  the  directory dir.  If none specified, the
               current directory will be used.

       HistoryName name
               Filename to use for history file.  Relative to output directory
               unless  absolute  name is given (ie: starts with '/'). Defaults
               to 'webalizer.hist' in the standard output directory.

       ReportTitle name
               Use the title string name for the report title.  If none speci-
               fied, use the default of (in english) "Usage Statistics for ".

       HostName name
               Set the hostname for the report as name.  If none specified, an
               attempt will be made to gather the hostname via a uname(2) sys-
               tem call.  If that fails, localhost will be used.

       UseHTTPS ( yes | no )
               Use  https:// on links to URLS, instead of the default http://,
               in the 'Top URLs' table.

       HTAccess ( yes | no )
               Enables the creation of a default .htaccess file in the  output
               directory.

       Quiet ( yes | no )
               Suppress  informational  messages.   Warning and Error messages
               will not be suppressed.

       ReallyQuiet ( yes | no )
               Suppress all messages, including Warning and Error messages.

       Debug ( yes | no )
               Print extra debugging information on Warnings and Errors.

       TimeMe ( yes | no )
               Force timing information at end of processing.

       GMTTime ( yes | no )
               Use GMT (UTC) time instead of local timezone for reports.

       IgnoreHist ( yes | no )
               Ignore previous monthly history file.  USE WITH CAUTION.   Does
               not prevent Incremental file processing.

       IgnoreState ( yes | no )
               Ignore  incremental  data file.  USE WITH CAUTION.  By ignoring
               the incremental data file, all previous processing for the cur-
               rent month will be lost and those logs must be re-processed.

       FoldSeqErr ( yes | no )
               Fold out of sequence log records back into analysis by treating
               them as if they had the same date/time as the last good record.
               Normally, out of sequence log records are ignored.

       CountryGraph ( yes | no )
               Display Country Usage Graph in output report.

       CountryFlags ( yes | no )
               Enable  or  disable the display of flags in the top country ta-
               ble.

       FlagDir name
               Specifies the  directory  name  where  the  flag  graphics  are
               located.   If not specified, the default is in the flags direc-
               tory directly under the output directory being used.  If speci-
               fied,  the display of country flags will be enabled by default.
               Using 'FlagDir flags' is identical to using 'CountryFlags yes'.

       DailyGraph ( yes | no )
               Display Daily Graph in output report.

       DailyStats ( yes | no )
               Display Daily Statistics in output report.

       HourlyGraph ( yes | no )
               Display Hourly Graph in output report.

       HourlyStats ( yes | no )
               Display Hourly Statistics in output report.

       PageType name
               Define the file extensions to consider as a page.  If a file is
               found to have the same extension as name, it will be counted as
               a page (sometimes called a pageview).

       PagePrefix name
               Allows URLs with the prefix name to be counted as a  page  type
               regardless  of actual file type.  This allows you to treat con-
               tents under specified directories as pages no matter what their
               extension is.

       OmitPage name
               Specifies URLs which should not be counted as pages, regardless
               of their extension (or lack thereof).

       GraphLegend ( yes | no )
               Allows the color coded graph legends to be enabled/disabled.

       GraphLines num
               Specify the number of background reference lines  displayed  on
               the  graphs  produced.  Disable by using zero ('0'), default is
               2.

       IndexMonths num
               Specify the number of months  to  display  in  the  main  index
               (yearly  summary)  table.  Default is 12 months.  Can be set to
               anything between 12 and 120 months (1 to 10 years).

       YearHeaders ( yes | no )
               Enable/disable the display of year headers in  the  main  index
               (yearly summary) table.  If enabled, year headers will be shown
               when the table is displaying more than 16 months worth of data.
               Values can be 'yes' or 'no'.  Default is 'yes'.

       YearTotals ( yes | no )
               Enable/disable  the  display  of  year totals in the main index
               (yearly summary) table.  If enabled, year totals will be  shown
               when the table is displaying more than 16 months worth of data.
               Values can be 'yes' or 'no'.  Default is 'yes'.

       GraphMonths num
               Specify the number of months  to  display  in  the  main  index
               (yearly  summary)  graph.  Default is 12 months.  Can be set to
               anything between 12 and 72 months (1 to 6 years).

       VisitTimeout num
               Specifies the visit timeout value.  Default is 1800 seconds (30
               minutes).   A  visit is determined by looking at the difference
               in time between the current and last request  from  a  specific
               site.   If  the  difference  is greater or equal to the timeout
               value, the request is counted as a  new  visit.   Specified  in
               seconds.

       IndexAlias name
               Use name as an additional alias for index.*.

       DefaultIndex ( yes | no )
               Enables or disables the use of 'index.' as a default index name
               to be stripped from the end of URLs.  This does not effect  any
               index names that may be defined with the IndexAlias option.

       MangleAgents num
               Mangle  user agent names based on mangle level num.  See the -M
               command line switch for mangle levels and their  meaning.   The
               default is 0, which doesn't mangle user agents at all.

       StripCGI ( yes | no )
               Determines if URL CGI variables should be stripped from the end
               of URLs.  Values may be 'yes' or 'no', with the  default  being
               'yes'.

       TrimSquidURL num
               Allows  squid log URLs to be reduced in granularity by truncat-
               ing them after num slashes ('/') after the http://  prefix.   A
               setting  of  one  (1)  will  cause all URLs to be summarized by
               domain only.  The default value is zero (0), which will disable
               any  URL  modifications  and leave them exactly as found in the
               log file.

       SearchEngine name variable
               Allows the specification of  search  engines  and  their  query
               strings.   The  name  is the name to match against the referrer
               string for a given search engine.   The  variable  is  the  cgi
               variable that the search engine uses for queries.  See the sam-
               ple.conf file for example usage with common search engines.

       SearchCaseI ( yes | no )
               Determines if search strings should be treated case insensitive
               or  not.   The  default  is  'yes', which lowercases all search
               strings (treat as case insensitive).

       Incremental ( yes | no )
               Enable Incremental mode processing.

       IncrementalName name
               Filename to use  for  incremental  data.   Relative  to  output
               directory  unless  an  absolute  name is given (ie: starts with
               '/').  Defaults to 'webalizer.current' in the  standard  output
               directory.

       DNSCache name
               Filename  to  use for the DNS cache.  Relative to output direc-
               tory unless an absolute name is given (ie: starts with '/').

       DNSChildren num
               Number of children DNS  processes  to  run  in  order  to  cre-
               ate/update the DNS cache file.  Specify zero (0) to disable.

       CacheIPs ( yes | no )
               Cache  unresolved IP addresses in the DNS database.  Default is
               'no'.

       CacheTTL num
               DNS cache entry time to live (TTL) in days.  Default is 7 days.
               May be any value between 1 and 100.

       GeoDB ( yes | no )
               Allows  native GeoDB geolocation services to be enabled or dis-
               abled.  Default value is 'no'.

       GeoDBDatabase name
               Allows the use of an alternate GeoDB  database  name.   If  not
               specified, the default database will be used.

       GeoIP ( yes | no )
               Allows  GeoIP  (by  MaxMind  Inc.)  geolocation  services to be
               enabled or disabled.  Default is 'no'.  If native GeoDB  geolo-
               cation services are also enabled, then this option will have no
               effect (and the native GeoDB services will be used).

       GeoIPDatabase name
               Allows the use of an alternate GeoIP  database  name.   If  not
               specified, the default database will be used.

       Top Table Keywords

       TopAgents num
               Display the top num User Agents table. Use zero to disable.

       AllAgents ( yes | no )
               Create separate HTML page with All User Agents.

       TopReferrers num
               Display the top num Referrers table. Use zero to disable.

       AllReferrers ( yes | no )
               Create separate HTML page with All Referrers.

       TopSites num
               Display the top num Sites table. Use zero to disable.

       TopKSites num
               Display  the  top num Sites (by KByte) table.  Use zero to dis-
               able.

       AllSites ( yes | no )
               Create separate HTML page with All Sites.

       TopURLs num
               Display the top num URLs table. Use zero to disable.

       TopKURLs num
               Display the top num URLs (by KByte) table.  Use  zero  to  dis-
               able.

       AllURLs ( yes | no )
               Create separate HTML page with All URLs.

       TopCountries num
               Display  the  top  num Countries in the table. Use zero to dis-
               able.

       TopEntry num
               Display the top num Entry Pages in the table.  Use zero to dis-
               able.

       TopExit num
               Display  the top num Exit Pages in the table.  Use zero to dis-
               able.

       TopSearch num
               Display the top num Search Strings in the table.  Use  zero  to
               disable.

       AllSearchStr ( yes | no )
               Create separate HTML page with All Search Strings.

       TopUsers num
               Display  the  top num Usernames in the table.  Use zero to dis-
               able.  Usernames are only available if using http based authen-
               tication.

       AllUsers ( yes | no )
               Create separate HTML page with All Usernames.

       Hide/Ignore/Group/Include Keywords

       HideAgent name
               Hide User Agents that match name.

       HideReferrer name
               Hide Referrers that match name.

       HideSite name
               Hide Sites that match name.

       HideAllSites ( yes | no )
               Hide  all  individual sites.  This causes only grouped sites to
               be displayed.

       HideURL name
               Hide URLs that match name.

       HideUser name
               Hide Usernames that match name.

       IgnoreAgent name
               Ignore User Agents that match name.

       IgnoreReferrer name
               Ignore Referrers that match name.

       IgnoreSite name
               Ignore Sites that match name.

       IgnoreURL name
               Ignore URLs that match name.

       IgnoreUser name
               Ignore Usernames that match name.

       GroupAgent name [Label]
               Group User Agents that  match  name.   Display  Label  in  'Top
               Agent'  table if given (instead of name).  name may be enclosed
               in quotes.

       GroupReferrer name [Label]
               Group Referrers that match name.  Display Label in 'Top  Refer-
               rer' table if given (instead of name).  name may be enclosed in
               quotes.

       GroupSite name [Label]
               Group Sites that match name.  Display Label in 'Top Site' table
               if given (instead of name).  name may be enclosed in quotes.

       GroupDomains num
               Automatically  group  sites by domain.  The value num specifies
               the level of grouping, and can be thought of as the 'number  of
               dots'  to be displayed.  The default value of 0 disables domain
               grouping.

       GroupURL name [Label]
               Group URLs that match name.  Display Label in 'Top  URL'  table
               if given (instead of name).  name may be enclosed in quotes.

       GroupUser name [Label]
               Group  Usernames  that match name.  Display Label in 'Top User-
               names' table if given (instead of name).  name may be  enclosed
               in quotes.

       IncludeSite name
               Force  inclusion  of  sites  that match name.  Takes precedence
               over Ignore* keywords.

       IncludeURL name
               Force inclusion of URLs that match name.  Takes precedence over
               Ignore* keywords.

       IncludeReferrer name
               Force inclusion of Referrers that match name.  Takes precedence
               over Ignore* keywords.

       IncludeAgent name
               Force inclusion of User Agents that match name.   Takes  prece-
               dence over Ignore* keywords.

       IncludeUser name
               Force inclusion of Usernames that match name.  Takes precedence
               over Ignore* keywords.

       HTML Generation Keywords

       HTMLExtension text
               Defines the HTML file extension to use.  Default is  html.   Do
               not include the leading period!

       HTMLPre text
               Insert  text  at the very beginning of the generated HTML file.
               Defaults to a standard html 3.2 DOCTYPE record.

       HTMLHead text
               Insert text within the <HEAD></HEAD> block of the HTML file.

       HTMLBody text
               Insert text in HTML page, starting with  the  <BODY>  tag.   If
               used,  the first line must be a <BODY ...> tag.  Multiple lines
               may be specified.

       HTMLPost text
               Insert text at top (before horiz. rule) of HTML pages.   Multi-
               ple lines may be specified.

       HTMLTail text
               Insert  text  at  bottom of the HTML page.  The text is top and
               right aligned within a table column at the end of the report.

       HTMLEnd text
               Insert text at the very end of the HTML page.   If  not  speci-
               fied,  the  default is to insert the ending </BODY> and </HTML>
               tags.  If used, you must supply these tags yourself.

       LinkReferrer ( yes | no )
               Determines if the referrers listed in the top  referrers  table
               should be displayed as plain text, or as a link to the referrer
               URL.

       ColorHit ( rrggbb | 00805c )
               Sets the graph's hit-color to  the  specified  html  color  (no
               '#').

       ColorFile ( rrggbb | 0040ff )
               Sets  the  graph's  file-color  to the specified html color (no
               '#').

       ColorSite ( rrggbb | ff8000 )
               Sets the graph's site-color to the  specified  html  color  (no
               '#').

       ColorKbyte ( rrggbb | ff0000 )
               Sets the graph's kilobyte-color to the specified html color (no
               '#').

       ColorPage ( rrggbb | 00e0ff )
               Sets the graph's page-color to the  specified  html  color  (no
               '#').

       ColorVisit ( rrggbb | ffff00 )
               Sets  the  graph's  visit-color to the specified html color (no
               '#').

       ColorMisc ( rrggbb | 00e0ff )
               Sets the 'miscellaneous' color for table headers  (not  graphs)
               to the specified html color (no '#').

       PieColor1 ( rrggbb | 800080 )
               Sets the pie's first optional color to the specified html color
               (no '#').

       PieColor2 ( rrggbb | 80ffc0 )
               Sets the pie's second optional  color  to  the  specified  html
               color (no '#').

       PieColor3 ( rrggbb | ff00ff )
               Sets the pie's third optional color to the specified html color
               (no '#').

       PieColor4 ( rrggbb | ffc480 )
               Sets the pie's fourth optional  color  to  the  specified  html
               color (no '#').

       Dump Object Keywords

       The  Webalizer allows you to export processed data to other programs by
       using tab delimited text files.  The Dump* commands specify which files
       are to be written, and where.

       DumpPath name
               Save  dump  files  in  directory  name.   If not specified, the
               default output directory will be used.  Do not specify a trail-
               ing slash ('/').

       DumpExtension name
               Use  name  as  the  filename  extension for dump files.  If not
               given, the default of tab will be used.

       DumpHeader ( yes | no )
               Print a column header as the first record of the file.

       DumpSites ( yes | no )
               Dump the sites data to a tab delimited file.

       DumpURLs ( yes | no )
               Dump the url data to a tab delimited file.

       DumpReferrers ( yes | no )
               Dump the referrer data to a tab delimited file.  This  data  is
               only  available  if using a log that contains referrer informa-
               tion (ie: a combined format web log).

       DumpAgents ( yes | no )
               Dump the user agent data to a tab delimited file.  This data is
               only available if using a log that contains user agent informa-
               tion (ie: a combined format web log).

       DumpUsers ( yes | no )
               Dump the username data to a tab delimited file.  This  data  is
               only  available  if  processing  a wu-ftpd xferlog or a web log
               that contains http authentication information.

       DumpSearchStr ( yes | no )
               Dump the search string data to a tab delimited file.  This data
               is  only available if processing a web log that contains refer-
               rer information and had search string information present.

FILES
       webalizer.conf      Default configuration file.  Is searched for in the
                           current  directory  and  if not found, in the /etc/
                           directory.

       webalizer.hist      Monthly history file for previous months.  (can  be
                           changed)

       webalizer.current   Current  state  data file (Incremental processing).
                           (can be changed)

       xxxxx_YYYYMM.html   Various monthly HTML output files produced. (exten-
                           sion can be changed)

       xxxxx_YYYYMM.png    Various monthly image files used in the reports.

       xxxxx_YYYYMM.tab    Monthly  tab  delimited text files.  (extension can
                           be changed)

BUGS
       Please report bugs to the author.

COPYRIGHT
       Copyright (C) 1997-2013 by Bradford L. Barrett.  Distributed under  the
       GNU  GPL.   See  the files "COPYING" and "Copyright", supplied with all
       distributions for additional information.

AUTHOR
       Bradford L. Barrett <brad at mrunix dot net>



ATTRIBUTES
       See attributes(7) for descriptions of the following attributes:


       +---------------+-------------------------+
       |ATTRIBUTE TYPE |    ATTRIBUTE VALUE      |
       +---------------+-------------------------+
       |Availability   | web/analytics/webalizer |
       +---------------+-------------------------+
       |Stability      | Uncommitted             |
       +---------------+-------------------------+
NOTES
       This    software    was    built    from    source     available     at
       https://github.com/oracle/solaris-userland.    The  original  community
       source was downloaded  from   ftp://ftp.mrunix.net/pub/webalizer/webal-
       izer-2.23-08-src.tar.bz2

       Further information about this software can be found on the open source
       community website at http://www.mrunix.net/webalizer/.



Version 2.23                      26-Feb-2013                     webalizer(1)