SEFOS へのアクセスを参照してください。
SEFOS# show vlan port config port interface-type 0/port
ここでは:
interface-type は、1GbE RJ-45 ポートの場合は gigabitethernet で、10GbE SFP+ ポートの場合は extreme-ethernet です。
port は、コネクタの近くに出力されるポート番号です。
たとえば、ポート 12 の VLAN 構成情報を表示するには、次を入力します。
SEFOS# show vlan port config port gigabitethernet 0/12 Vlan Port configuration table ------------------------------- Port Gi0/12 Bridge Port Type : Customer Bridge Port Port Vlan ID : 1 Port Acceptable Frame Type : Admit All Port Mac Learning Status : Enabled Port Ingress Filtering : Disabled Port Mode : Hybrid Port Gvrp Status : Enabled Port Gmrp Status : Enabled Port Gvrp Failed Registrations : 0 Gvrp last pdu origin : 00:10:e0:80:4d:19 Port Restricted Vlan Registration : Disabled Port Restricted Group Registration : Disabled Mac Based Support : Disabled Subnet Based Support : Disabled Port-and-Protocol Based Support : Enabled Default Priority : 0 Dot1x Protocol Tunnel Status : Peer LACP Protocol Tunnel Status : Peer Spanning Tree Tunnel Status : Peer MVRP Protocol Tunnel Status : Peer MMRP Protocol Tunnel Status : Peer GVRP Protocol Tunnel Status : Peer GMRP Protocol Tunnel Status : Peer IGMP Protocol Tunnel Status : Peer ELMI Protocol Tunnel Status : Peer LLDP Protocol Tunnel Status : Peer ECFM Protocol Tunnel Status : Peer Filtering Utility Criteria : Default Port Protected Status : Disabled Ingress EtherType : 0x8100 Egress EtherType : 0x8100 Egress TPID Type : Portbased Allowable TPID 1 : 0x0 Allowable TPID 2 : 0x0 Allowable TPID 3 : 0x0 ------------------------------------------------------- SEFOS#