Go to main content
Oracle EDR InfiniBand Switch および仮想 I/O システム管理ガイド

印刷ビューの終了

更新: 2016 年 11 月
 
 

/SP 汎用ターゲットとプロパティー

一般的なスイッチのプロパティーに関する情報を表示したり、それを構成したりするには、これらの /SP ターゲットに対して show および set コマンドを使用します。


注 -  Not Supported または N/A として示されるプロパティーは一覧表示されません。
Oracle ILOM ターゲット
プロパティー
説明
/SP
  • check_physical_presence = true

  • current_hostname = ORACLESP-1

  • hostname = us-gw-1

  • reset_to_defaults = none

  • system_contact = (none)

  • system_description = unknown, ILOM v3.2.0.0, r102282

  • system_identifier = (none)

  • system_location = (none)

管理コントローラまたはホスト。
/SP/alertmgmt/rules/x
  • type = snmptrap

  • level = disable

  • community_or_username = public

  • destination = 123.45.67.89

  • destination_port = 0

  • snmp_version = 2c

  • testrule = (Cannot show property)

アラート規則。
/SP/cli
  • legacy_targets = disabled

  • prompt = (none)

  • timeout = 0

CLI の構成。
/SP/clock
  • datetime = Thu Oct 8 05:19:52 2015

  • timezone = GMT (GMT)

  • uptime = 348 days, 17:32:17

  • usentpserver = disabled

クロックの構成。
/SP/config
  • dump_uri = (Cannot show property)

  • include_faultdata = false

  • load_uri = (Cannot show property)

  • passphrase = none

構成のバックアップと復元の設定。
/SP/diag/snapshot
  • dataset = normal

  • dump_uri = (Cannot show property)

  • encrypt_output = false

  • result = (none)

スイッチスナップショットの状態。
/SP/firmware
  • load_uri = (Cannot show property)

システムファームウェアの管理。
/SP/logs/audit
  • clear = (Cannot show property)

監査ログの管理。
/SP/logs/audit/list
プロパティーなし。
監査ログ自体。
/SP/logs/event
  • clear = (Cannot show property)

イベントログの管理。
/SP/logs/event/list
プロパティーなし。
イベントログ自体。
/SP/network
  • commitpending = (Cannot show property)

  • dhcp_clientid = sysid

  • dhcp_server_ip = none

  • ipaddress = 0.0.0.0

  • ipdiscovery = static

  • ipgateway = 123.45.67.1

  • ipnetmask = 255.255.255.0

  • macaddress = 00:AB:CD:EF:AB:CD

  • pendingipaddress = 123.45.67.89

  • pendingipdiscovery = static

  • pendingipgateway = 123.45.67.1

  • pendingipnetmask = 255.255.255.0

  • pendingvlan_id = (none)

  • state = ipv4-only

  • vlan_id = (none)

外部ネットワークインタフェース。
/SP/network/ipv6
  • state = disabled

  • autoconfig = stateless

  • dhcpv6_server_duid = (none)

  • link_local_addresss = fe80:203:baff:fe7a:a197/64

  • static_ipaddress = ::128

  • ipgateway = ::

  • static_ipgateway = ::

  • pending_static_ipaddress = ::128

  • pending_static_ipgateway = ::

IPv6 プロトコルの構成。
/SP/network/test
  • ping = (Cannot show property)

  • ping6 = (Cannot show property)

ping テスト。
/SP/preferences/banner/connect
  • dump_uri = (Cannot show property)

  • load_uri = (Cannot show property)

  • message = (none)

システムバナー接続メッセージ。
/SP/preferences/banner/login
  • dump_uri = (Cannot show property)

  • load_uri = (Cannot show property)

  • message = (none)

  • message_acceptance = disabled

システムバナーログインメッセージ。
/SP/preferences/password_policy
  • policy = 8

  • min_length = 8

  • uppercase = no restrictions

  • lowercase = no restrictions

  • symbols = no restrictions

  • numbers = no restrictions

  • history = no restrictions

システムパスワードの構成。
/SP/serial/external
  • commitpending = (Cannot show property)

  • flowcontrol = software

  • pendingflowcontrol = software

  • pendingspeed = 115200

  • speed=115200

シリアルポート接続の構成。
/SP/serial/host
  • commitpending = (Cannot show property)

  • flowcontrol = software

  • pendingflowcontrol = software

  • pendingspeed = 115200

  • speed = 115200

シリアルホスト通信の構成。
/SP/serial/portsharing
  • owner = sp

シリアルポート共有の構成。
/SP/sessions
プロパティーなし。
アクティブなセッション。
/SP/sessions/x
  • username = root

  • role = aucro

  • starttime = Fri Oct 9 23:58:15 2015

  • type = console

  • mode = normal

アクティブなユーザーセッションのモニタリング。
/SP/users
プロパティーなし。
ユーザーの構成。
/SP/users/root
  • role = aucro

  • password = *****

ユーザー root の役割とパスワード。
/SP/users/root/ssh/keys/x
  • fingerprint = (none)

  • algorithm = (none)

  • embedded_comment = (none)

  • bit_length = (none)

  • load_uri = (Cannot show property)

  • clear_action = (Cannot show property)

ユーザー root の SSH 認証と鍵の構成。

関連情報