|
|
|
Display or set the total number of reserved PSs.
|
read
write
|
sunHwCtrlReservedPSU
|
Display the total number of PSs.
|
read
|
sunHwCtrlTotalPSU
|
Display table listing additional power management
properties.
|
not accessible
|
sunHwCtrlPowerMgmtTable
|
Display an entry for a power management property.
|
not accessible
|
sunHwCtrlPowerMgmtEntry
|
Display an index for
sunHwCtrlPowerMgmtTable .
|
not accessible
|
sunHwCtrlPowerMgmtID
|
Display the name of the power management property.
|
read
|
sunHwCtrlPowerMgmtName
|
Display the units for the value of the power management
property.
|
read
|
sunHwCtrlPowerMgmtUnits
|
Display value of the power management property.
|
read
|
sunHwCtrlPowerMgmtValue
|
Display the total input power consumed in Watts.
-
On a rackmount server, total power consumption is the
input power consumed by the server.
-
On a blade, this is the input power consumed just by
the blade (not including any power consumed by shared
components).
|
read
|
sunHwCtrlPowerMgmtActualPower
|
Display the maximum input power consumption in Watts.
-
On a rackmount server, the maximum power consumption
is the maximum input power the server guarantees it will
consume at any instant.
-
On a blade, this is the maximum input power a blade
guarantees it will consume, not including its power load
on shared components.
|
read
|
sunHwCtrlPowerMgmtPermittedPower
|
Display the maximum input power capacity in Watts. Power
capacity is the maximum input power the power supplies are
capable of consuming.
|
read
|
sunHwCtrlPowerMgmtAvailablePower
|
Display the desired power management policy.
|
read
|
sunHwCtrlPowerMgmtPolicy
|
Display the power allocated in Watts to all power consuming
components in the system (includes power permanently allocated
for unmanaged hot-pluggable components such as I/O and
fans).
|
read
|
sunHwCtrlPowerMgmtAllocatedPower
|
Display or set the current state of
sunHwCtrlPowerMgmtBudgetMinPowerlimit,
sunHwCtrlPowerMgmtBudgetPowerlimit,
sunHwCtrlPowerMgmtBudgetTimelimit,
and
sunHwCtrlPowerMgmtBudgetTimelimitActions.
Also, returns state value of enabled or disabled, and when
possible, returns power budget values for the objects.
|
read
write
|
sunHwCtrlPowerMgmtBudget
|
Display the minimum value
sunHwCtrlPowerMgmtBudgetPowerlimit
can be set to. Power consumption can be controlled to fit within
as little as this amount of power when the system is powered
on.
|
read
|
sunHwCtrlPowerMgmtBudgetMinPowerlimit
|
Display the maximum power consumption in Watts.
|
read
|
sunHwCtrlPowerMgmtBudgetPowerlimit
|
Display the grace period for exceeding the power limit once
the power limit has been achieved, in milliseconds.
|
read
|
sunHwCtrlPowerMgmtBudgetTimelimit
|
Display a list of actions that will occur if the power limit
is exceeded and cannot be controlled within the time limit.
|
read
|
sunHwCtrlPowerMgmtBudgetTimelimitActions
|
Display the state of the power budget based on reading and
comparing the sunHwCtrlPowerMgmtBudget
,sunHwCtrlPowerMgmtBudget, and
sunHwCtrlPowerMgmtBudgetPowerlimit
objects.
|
read
|
sunHwCtrlPowerMgmtBudgetOK
|
Display or commit any pending values for
sunHwCtrlPowerMgmtBudgetPendingPowerlimit,
sunHwCtrlPowerMgmtBudgetPendingTimelimit,
and
sunHwCtrlPowerMgmtBudgetPendingTimelimitActions
objects.
|
read
write
|
sunHwCtrlPowerMgmtBudgetCommitPending
|
Display or commit the value applied to
sunHwCtrlPowerMgmtBudgetPowerlimit.
|
read
write
|
sunHwCtrlPowerMgmtBudgetPendingPowerlimit
|
Display or commit the value applied to
sunHwCtrlPowerMgmtBudgetTimelimit.
|
read
write
|
sunHwCtrlPowerMgmtBudgetPendingTimelimit
|
Display or commit the value applied to
sunHwCtrlPowerMgmtBudgetTimelimitActions.
|
read
write
|
sunHwCtrlPowerMgmtBudgetPendingTimelimitActions
|
Display or commit up to two threshold values that determine if
Oracle ILOM threshold events get generated based on the value of
the system power consumption sensor (typically
/SYS/VPS).
|
read
write
|
sunHwCtrlPowerMgmtConsumptionThresholds
|
Display or set a sampling period, in seconds, over which
sunHwCtrlPowerMgmtSamplingMinimumPower,
sunHwCtrlPowerMgmtSamplingMaximumPower,
and
sunHwCtrlPowerMgmtSamplingAveragePower
are calculated and reported.
|
read
write
|
sunHwCtrlPowerMgmtSamplingPeriod
|
Display the date and time at which the power consumption
values were calculated.
|
read
|
sunHwCtrlPowerMgmtSamplingTimestamp
|
Display or set the minimum measured power consumption during
the most recent sampling period, in Watts.
|
read
write
|
sunHwCtrlPowerMgmtSamplingMinimumPower
|
Display the minimum measured power consumption during the most
recent sampling period, in Watts.
|
read
|
sunHwCtrlPowerMgmtSamplingMinimumPower
|
Display the maximum measured power consumption during the most
recent sampling period, in Watts.
|
read
|
sunHwCtrlPowerMgmtSamplingMaximumPower
|
Display or set the average measured power consumption during
the most recent sampling period, in Watts.
|
read
write
|
sunHwCtrlPowerMgmtSamplingAveragePower
|
Display the counterpart for
sunHwCtrlPowerMgmtActualPower for
multidomain.
|
read
|
sunHwCtrlDomainPowerMgmtActualPower
|
Display the counterpart for
sunHwCtrlPowerMgmtPermittedPower
for multidomain.
|
read
|
sunHwCtrlDomainPowerMgmtPermittedPower
|
Display the counterpart for
sunHwCtrlPowerMgmtAvailablePower
for multidomain.
|
read
|
sunHwCtrlDomainPowerMgmtAvailablePower
|
Display or set the counterpart for
sunHwCtrlPowerMgmtPolicy for
multidomain.
|
read
write
|
sunHwCtrlDomainPowerMgmtPolicy
|
Display the counterpart for
sunHwCtrlPowerMgmtAllocatedPower
for multidomain.
|
read
|
sunHwCtrlDomainPowerMgmtAllocatedPower
|
Display or set the counterpart for
sunHwCtrlPowerMgmtBudget for
multidomain.
|
read
write
|
sunHwCtrlDomainPowerMgmtBudget
|
Display the counterpart for
sunHwCtrlPowerMgmtBudgetMinPowerlimit
for multidomain.
|
read
|
sunHwCtrlDomainPowerMgmtBudgetMinPowerLimit
|
Display the counterpart for
sunHwCtrlPowerMgmtBudgetTimelimit
for multidomain.
|
read
|
sunHwCtrlDomainPowerMgmtBudgetTimeLimit
|
Display the counterpart for
sunHwCtrlPowerMgmtBudgetTimelimitActions
for multidomain.
|
read
|
sunHwCtrlDomainPowerMgmtBudgetTimeLimitActions
|
Display the counterpart for
sunHwCtrlPowerMgmtBudgetOK for
multidomain.
|
read
|
sunHwCtrlDomainPowerMgmtBudgetOK
|
Display or set the counterpart for
sunHwCtrlPowerMgmtBudgetCommitPending
for multidomain.
|
read
write
|
sunHwCtrlDomainPowerMgmtBudgetCommitPending
|
Display or set the counterpart for
sunHwCtrlPowerMgmtBudgetPendingPowerlimit
for multidomain.
|
read
write
|
sunHwCtrlDomainPowerMgmtBudgetPendingPowerLimit
|
Display or set the counterpart for
sunHwCtrlPowerMgmtBudgetPendingTimelimit
for multidomain.
|
read
write
|
sunHwCtrlDomainPowerMgmtBudgetPendingTimeLimit
|
Display or set the counterpart for
sunHwCtrlPowerMgmtBudgetPendingTimeLimitActions
for multidomain.
|
read
write
|
sunHwCtrlDomainPowerMgmtBudgetPendingTimeLimitActions
|
Display or set the counterpart for
sunHwCtrlPowerMgmtBudgetPendingPowerlimit
for multidomain.
|
read
write
|
sunHwCtrlDomainPowerMgmtBudgetPendingPowerLimit
|
Display or set the counterpart for
sunHwCtrlPowerMgmtBudgetPendingPowerlimit
for multidomain.
|
read
write
|
sunHwCtrlDomainPowerMgmtBudgetPendingPowerLimit
|
Display the counterpart for
sunHwCtrlPowerMgmtBudgetPendingTimelimit
for multidomain.
|
read
|
sunHwCtrlDomainPowerMgmtBudgetPendingPowerLimit
|
Display or set the counterpart for
sunHwCtrlPowerMgmtBudgetPendingTimelimitActions
for multidomain.
|
read
write
|
sunHwCtrlDomainPowerMgmtBudgetPendingTimeLimitActions
|
Display the counterpart for
sunHwCtrlPowerMgmtConsumptionThreshold
for multidomain. Can be up to two threshold objects.
|
read
|
sunHwCtrlDomainPowerMgmtConsumptionThresholdX
|