Set the Network Management Parameters (Oracle ILOM Web)

The switch's network management parameters allow the Oracle ILOM to automatically learn the SP's IP address.

1. Choose ILOM Administration→Connectivity, and click the Network tab.
2. For the version of IP in use, select the Enabled checkbox for State to enable the protocol.
3. Select the IP Discovery Mode, either DHCP or Static.
4. If you select Static, type the SP's IP address, netmask, and IPv4 gateway IP address into their respective fields.
5. Click Save.
6. Re-establish the connection to the network management to continue administering the SP.

   See Access Oracle ILOM From the Web Interface.

Related Information

• Set Network Management Properties (Oracle ILOM Web)

• Set the Switch's IPv4 Management Network Properties (Oracle ILOM Web)

• Set the Switch's IPv4 Management Network Dynamic Addresses (Oracle ILOM Web)

• Set the Switch's IPv6 Management Network Properties (Oracle ILOM Web)

• Test the Management Network Configuration (Oracle ILOM Web)

• Display the Management Network Configuration (Oracle ILOM Web)

• Display the System-Level Health of Management Networking (Oracle ILOM Web)