Display the Management Network Configuration (Oracle ILOM CLI)

Use this task to display the current settings for the SP and network management interface, including IP networking properties, gateway, SP MAC address and assigned IP addresses.

• Display the network management configuration.

  -> show -d properties /SP/network
  

  For example, type:

  -> show -d properties /SP/network
   /SP/network
   	Properties:
   		commitpending = (Cannot show property)
   		dhcp_clientid = none
   		dhcp_server_ip = 10.11.12.13
   		ipaddress = 10.11.12.70
   		ipdiscovery = dhcp
   		ipgateway = 10.11.12.1
   		ipnetmask = 255.255.255.0
   		macaddress = 00:E0:4B:28:00:8E
   		pendingipaddress = 10.11.12.70
   		pendingipdiscovery = dhcp
   		pendingipgateway = 10.11.12.1
   		pendingipnetmask = 255.255.255.0
   		state = enabled
  ->
  

Related Information

• Display Ethernet Switch Properties (Oracle ILOM CLI)

• Display the Switch Firmware Versions (Oracle ILOM CLI)

• Configure the Management Network Parameters (Oracle ILOM CLI)

• Enable IPv4 (Oracle ILOM CLI)

• Configure IPv4 Routing Properties (Oracle ILOM CLI)

• Enable IPv6 Management Network Routing (Oracle ILOM CLI)

• Configure IPv6 Management Network Properties (Oracle ILOM CLI)