Oracle EDR InfiniBand Switch and Virtualized I/O Systems Administration Guide

Exit Print View

Updated: November 2016
 
 

/SP General Targets and Properties

Use the show and set commands on these /SP targets to display information about and configure general switch properties.


Note -  Properties indicated as Not Supported or N/A are not listed.
Oracle ILOM Target
Properties
Description
/SP
  • check_physical_presence = true

  • current_hostname = ORACLESP-1

  • hostname = us-gw-1

  • reset_to_defaults = none

  • system_contact = (none)

  • system_description = unknown, ILOM v3.2.0.0, r102282

  • system_identifier = (none)

  • system_location = (none)

Management controller or host.
/SP/alertmgmt/rules/x
  • type = snmptrap

  • level = disable

  • community_or_username = public

  • destination = 123.45.67.89

  • destination_port = 0

  • snmp_version = 2c

  • testrule = (Cannot show property)

Alert rules.
/SP/cli
  • legacy_targets = disabled

  • prompt = (none)

  • timeout = 0

CLI configuration.
/SP/clock
  • datetime = Thu Oct 8 05:19:52 2015

  • timezone = GMT (GMT)

  • uptime = 348 days, 17:32:17

  • usentpserver = disabled

Clock configuration.
/SP/config
  • dump_uri = (Cannot show property)

  • include_faultdata = false

  • load_uri = (Cannot show property)

  • passphrase = none

Configuration backup and restore settings.
/SP/diag/snapshot
  • dataset = normal

  • dump_uri = (Cannot show property)

  • encrypt_output = false

  • result = (none)

State of switch snapshot.
/SP/firmware
  • load_uri = (Cannot show property)

System firmware management.
/SP/logs/audit
  • clear = (Cannot show property)

Audit log management.
/SP/logs/audit/list
No properties.
Audit log itself.
/SP/logs/event
  • clear = (Cannot show property)

Event log management.
/SP/logs/event/list
No properties.
Event log itself.
/SP/network
  • commitpending = (Cannot show property)

  • dhcp_clientid = sysid

  • dhcp_server_ip = none

  • ipaddress = 0.0.0.0

  • ipdiscovery = static

  • ipgateway = 123.45.67.1

  • ipnetmask = 255.255.255.0

  • macaddress = 00:AB:CD:EF:AB:CD

  • pendingipaddress = 123.45.67.89

  • pendingipdiscovery = static

  • pendingipgateway = 123.45.67.1

  • pendingipnetmask = 255.255.255.0

  • pendingvlan_id = (none)

  • state = ipv4-only

  • vlan_id = (none)

External network interface.
/SP/network/ipv6
  • state = disabled

  • autoconfig = stateless

  • dhcpv6_server_duid = (none)

  • link_local_addresss = fe80:203:baff:fe7a:a197/64

  • static_ipaddress = ::128

  • ipgateway = ::

  • static_ipgateway = ::

  • pending_static_ipaddress = ::128

  • pending_static_ipgateway = ::

IPv6 protocol configuration.
/SP/network/test
  • ping = (Cannot show property)

  • ping6 = (Cannot show property)

Ping test.
/SP/preferences/banner/connect
  • dump_uri = (Cannot show property)

  • load_uri = (Cannot show property)

  • message = (none)

System banner connection message.
/SP/preferences/banner/login
  • dump_uri = (Cannot show property)

  • load_uri = (Cannot show property)

  • message = (none)

  • message_acceptance = disabled

System banner login message.
/SP/preferences/password_policy
  • policy = 8

  • min_length = 8

  • uppercase = no restrictions

  • lowercase = no restrictions

  • symbols = no restrictions

  • numbers = no restrictions

  • history = no restrictions

System password configuration.
/SP/serial/external
  • commitpending = (Cannot show property)

  • flowcontrol = software

  • pendingflowcontrol = software

  • pendingspeed = 115200

  • speed=115200

Serial port connection configuration.
/SP/serial/host
  • commitpending = (Cannot show property)

  • flowcontrol = software

  • pendingflowcontrol = software

  • pendingspeed = 115200

  • speed = 115200

Serial host communication configuration.
/SP/serial/portsharing
  • owner = sp

Serial port sharing configuration.
/SP/sessions
No properties.
Active sessions.
/SP/sessions/x
  • username = root

  • role = aucro

  • starttime = Fri Oct 9 23:58:15 2015

  • type = console

  • mode = normal

Monitor active user sessions.
/SP/users
No properties.
User configuration.
/SP/users/root
  • role = aucro

  • password = *****

User root role and password.
/SP/users/root/ssh/keys/x
  • fingerprint = (none)

  • algorithm = (none)

  • embedded_comment = (none)

  • bit_length = (none)

  • load_uri = (Cannot show property)

  • clear_action = (Cannot show property)

User root SSH authentication and key configuration.

Related Information