Oracle EDR InfiniBand Switch and Virtualized I/O Systems Administration Guide

Exit Print View

Updated: November 2016
 
 

Configure the Switch IP Address (Oracle ILOM Web)

The switch IP address is configured as part of installing the switch. Refer to the installation guide for your switch.

The switch IP address should remain configured across power cycles, upgrades and so on, so you should not need to configure the switch IP address often. However, if you do need to configure or reset the switch's IP address, you must use the nm3tool.


Note -  The nm3tool is also used for chassis upgrades. See Upgrading the Switch Firmware (nm3tool).

Related Information