/SYS Oracle F2 I/O Module Targets and Properties

Language:

`/SYS` Oracle F2 I/O Module Targets and Properties

The Oracle Fabric Interconnect F2-12 supports numerous types of Oracle F2 I/O modules to customize the switch for your deployment. The Oracle F2 I/O modules are not supported in the leaf switch.

Use the show command on the /SYS/MODULES/MODULEx targets to display information about and status for the Oracle F2 I/O modules installed in your virtualization switch.

Note - Properties indicated as Not Supported or N/A are not listed in the table. Also, different types of module exist. One module type is used as an example, so some of the properties listed will be different depending on the type of module that Oracle ILOM is querying.

Oracle ILOM Target	Properties	Description
/SYS/MODULES/MODULE`x`	type = Network Module ipmi_name = /MODULE`x` fru_description = PCBA,NM3 Module fru_manufacturer = Oracle Corporation fru_part_number = 7097301 fru_rev_level = 03 fru_serial_number = 489089M+1549R0003A fru_mac_address = 00:10:e0:97:f3:68 fault_state = OK clear_fault_action = (none) power_state = on	Module `x` information.
/SYS/MODULES/MODULE`x`/0V85_OK/	type = Voltage ipmi_name = MODULE/0V85_OK class = Discrete Sensor value = State Asserted alarm_status = cleared	Module `x` 0v85 voltage information.
/SYS/MODULES/MODULE`x`/1V0_OK/	type = Voltage ipmi_name = MODULE/1V0_OK class = Discrete Sensor value = State Asserted alarm_status = cleared	Module `x` 1V0 voltage information.
/SYS/MODULES/MODULE`x`/1V2_OK/	type = Voltage ipmi_name = MODULE/1V2_OK class = Discrete Sensor value = State Asserted alarm_status = cleared	Module `x` 1V2 voltage information.
/SYS/MODULES/MODULE`x`/1V8_OK/	type = Voltage ipmi_name = MODULE/1V8_OK class = Discrete Sensor value = State Asserted alarm_status = cleared	Module `x` 1V8 voltage information.
/SYS/MODULES/MODULE`x`/2V5_OK/	type = Voltage ipmi_name = MODULE/1V2_OK class = Discrete Sensor value = State Asserted alarm_status = cleared	Module `x` 2V5 voltage information. .
/SYS/MODULES/MODULE`x`/3V3_OK/	type = Voltage ipmi_name = MODULE/3V3_OK class = Discrete Sensor value = State Asserted alarm_status = cleared	Module `x` 3V3 voltage information.
/SYS/MODULES/MODULE`x`/BOOTED	type = Boot class = Discrete Sensor value = State Deasserted alarm_status = cleared	Module `x` boot up information.
/SYS/MODULES/MODULE`x`/FAULT	type = Module ipmi_name = MODULEX/FAULT class = Discrete Sensor value = State Deasserted alarm_status = cleared	Module `x` fault information.
/SYS/MODULES/MODULE`x`/T_CRITICAL	type = Module class = Discrete Sensor value = State Deasserted alarm_status = cleared	Module `x` critical temperature information.
/SYS/MODULES/MODULE`x`/T_MOD	type = Temperature class = Threshold Sensor value = 0.000 degree C upper_nonrecov_threshold = 105.000 degree C upper_critical_threshold = 100.000 degree C upper_noncritical_threshold = 95.000 degree C lower_critical_threshold = -1.000 degree C alarm_status = cleared	Module `x` temperature threshold information.

Related Information

`/SYS` Oracle F2 I/O Module Targets and Properties