Display Port VLAN Configuration Information (SEFOS)

1. Access SEFOS.

   See Access SEFOS.

2. Display the VLAN configuration information for the port.

   SEFOS# show vlan port config port interface-type 0/port

   where:

   • interface-type is either gigabitethernet for the 1GbE RJ-45 ports or extreme-ethernet for the 10GbE SFP+ ports.

   • port is the port number printed near the connector.

   For example, to display the VLAN configuration information for port 12, type:

   SEFOS# show vlan port config port gigabitethernet 0/12
   
   Vlan Port configuration table
   -------------------------------
   Port Gi0/12
    Bridge Port Type                    : Customer Bridge Port
    Port Vlan ID                        : 1
    Port Acceptable Frame Type          : Admit All
    Port Mac Learning Status            : Enabled
    Port Ingress Filtering              : Disabled
    Port Mode                           : Hybrid
    Port Gvrp Status                    : Enabled
    Port Gmrp Status                    : Enabled
    Port Gvrp Failed Registrations      : 0
    Gvrp last pdu origin                : 00:10:e0:80:4d:19
    Port Restricted Vlan Registration   : Disabled
    Port Restricted Group Registration  : Disabled
    Mac Based Support                   : Disabled
    Subnet Based Support                : Disabled
    Port-and-Protocol Based Support     : Enabled
    Default Priority                    : 0
    Dot1x Protocol Tunnel Status        : Peer
    LACP Protocol Tunnel Status         : Peer
    Spanning Tree Tunnel Status         : Peer
    MVRP Protocol Tunnel Status         : Peer
    MMRP Protocol Tunnel Status         : Peer
    GVRP Protocol Tunnel Status         : Peer
    GMRP Protocol Tunnel Status         : Peer
    IGMP Protocol Tunnel Status         : Peer
    ELMI Protocol Tunnel Status         : Peer
    LLDP Protocol Tunnel Status         : Peer
    ECFM Protocol Tunnel Status         : Peer
    Filtering Utility Criteria          : Default
    Port Protected Status               : Disabled
    Ingress EtherType                   : 0x8100
    Egress EtherType                    : 0x8100
    Egress TPID Type                    : Portbased
    Allowable TPID 1                    : 0x0
    Allowable TPID 2                    : 0x0
    Allowable TPID 3                    : 0x0
    -------------------------------------------------------
   
   SEFOS#

Related Information

• Display VLANs (SEFOS)

• Enable VLANs (SEFOS)

• Create a VLAN (SEFOS)

• Add a Port to a VLAN (SEFOS)

• Remove a Port From a VLAN (SEFOS)

• Delete a VLAN (SEFOS)

• Disable VLANs (SEFOS)