Enable Alerts to Send SNMP Traps (Oracle ILOM Web)
Alerts are sent when conditions in the switch match an alert level that
you create by editing a preconfigured rule already on the switch. Part of
configuring the rule is specifying the alert level, and also, specifying the
alert type, which can be an SNMP trap. When an alert of the specified level
or greater occurs, the switch then sends an SNMP trap. By default, alerts
are disabled.
-
Choose ILOM Administration→Notifications, and click the Alerts
tab.
-
In the Alerts table, select an existing alert and click Edit.
-
Select the alert level from the Level drop-down menu.
-
Select SNMP Trap from the Type drop-down menu.
-
Type the SNMP trap destination address or host name into the Address
field.
-
If you want to specify the port, uncheck the Autoselect box, and type
the port number into the Destination Port field.
-
Select the SNMP version from the SNMP Version drop-down menu.
-
Type the SNMP name:
-
For SNMP v3, enter the secure user name.
-
For SNMP v1 or v2c, enter the community name.
-
Click Save.