Back Up the Configuration (Oracle ILOM Web)
At times, you might want to back up the switch configuration so that you have
a copy to revert to if needed. For example, before starting an upgrade, you
might want to back up the existing configuration. When you backup the
configuration, it is kept in a separate file on the SP.
-
Choose ILOM Administration→Configuration Management, and click the
Backup/Restore tab.
-
Select Backup from the Operation drop-down menu.
-
Select the transfer protocol from the Transfer Method drop-down
menu.
-
For the protocol selected, type the host IP address, file path, user name,
and password into the respective fields.
If you selected TFTP as the transfer protocol, type just the host IP
address and file path.
-
(Optional) Make a note of the device where you will back up the
configuration.
Noting the device that contains the backed up configuration is helpful if
you need to restore the configuration later.
-
If you want to back up sensitive information in addition to the
configuration:
-
Type a passphrase into the Passphrase field.
-
Type the passphrase again into the Confirm Passphrase
field.
-
Click Run.
A dialog prompts you for confirmation.
-
Click OK.