Go to main content
マニュアルページ セク ション 1: ユー ザーコマンド

印刷ビューの終了

更新: 2016年12月6日
 
 

ntlm_auth (1)

名前

ntlm_auth - tool to allow external access to Winbind's NTLM authentication function

形式

ntlm_auth [-d debuglevel] [-l logdir] [-s <smb config file>]

説明

NTLM_AUTH(1)                     User Commands                    NTLM_AUTH(1)



NAME
       ntlm_auth - tool to allow external access to Winbind's NTLM
       authentication function

SYNOPSIS
       ntlm_auth [-d debuglevel] [-l logdir] [-s <smb config file>]

DESCRIPTION
       This tool is part of the samba(7) suite.

       ntlm_auth is a helper utility that authenticates users using NT/LM
       authentication. It returns 0 if the users is authenticated successfully
       and 1 if access was denied. ntlm_auth uses winbind to access the user
       and authentication data for a domain. This utility is only intended to
       be used by other programs (currently Squid and mod_ntlm_winbind)

OPERATIONAL REQUIREMENTS
       The winbindd(8) daemon must be operational for many of these commands
       to function.

       Some of these commands also require access to the directory
       winbindd_privileged in $LOCKDIR. This should be done either by running
       this command as root or providing group access to the
       winbindd_privileged directory. For security reasons, this directory
       should not be world-accessable.

OPTIONS
       --helper-protocol=PROTO
           Operate as a stdio-based helper. Valid helper protocols are:

           squid-2.4-basic
               Server-side helper for use with Squid 2.4's basic (plaintext)
               authentication.

           squid-2.5-basic
               Server-side helper for use with Squid 2.5's basic (plaintext)
               authentication.

           squid-2.5-ntlmssp
               Server-side helper for use with Squid 2.5's NTLMSSP
               authentication.

               Requires access to the directory winbindd_privileged in
               $LOCKDIR. The protocol used is described here:
               http://devel.squid-cache.org/ntlm/squid_helper_protocol.html.
               This protocol has been extended to allow the NTLMSSP Negotiate
               packet to be included as an argument to the YR command. (Thus
               avoiding loss of information in the protocol exchange).

           ntlmssp-client-1
               Client-side helper for use with arbitrary external programs
               that may wish to use Samba's NTLMSSP authentication knowledge.

               This helper is a client, and as such may be run by any user.
               The protocol used is effectively the reverse of the previous
               protocol. A YR command (without any arguments) starts the
               authentication exchange.

           gss-spnego
               Server-side helper that implements GSS-SPNEGO. This uses a
               protocol that is almost the same as squid-2.5-ntlmssp, but has
               some subtle differences that are undocumented outside the
               source at this stage.

               Requires access to the directory winbindd_privileged in
               $LOCKDIR.

           gss-spnego-client
               Client-side helper that implements GSS-SPNEGO. This also uses a
               protocol similar to the above helpers, but is currently
               undocumented.

           ntlm-server-1
               Server-side helper protocol, intended for use by a RADIUS
               server or the 'winbind' plugin for pppd, for the provision of
               MSCHAP and MSCHAPv2 authentication.

               This protocol consists of lines in the form: Parameter: value
               and Parameter:: Base64-encode value. The presence of a single
               period .  indicates that one side has finished supplying data
               to the other. (Which in turn could cause the helper to
               authenticate the user).

               Currently implemented parameters from the external program to
               the helper are:

               Username
                   The username, expected to be in Samba's unix charset.

                   Examples:
                       Username: bob

                       Username:: Ym9i

               NT-Domain
                   The user's domain, expected to be in Samba's unix charset.

                   Examples:
                       NT-Domain: WORKGROUP

                       NT-Domain:: V09SS0dST1VQ

               Full-Username
                   The fully qualified username, expected to be in Samba's
                   unix charset and qualified with the winbind separator.

                   Examples:
                       Full-Username: WORKGROUP\bob

                       Full-Username:: V09SS0dST1VQYm9i

               LANMAN-Challenge
                   The 8 byte LANMAN Challenge value, generated randomly by
                   the server, or (in cases such as MSCHAPv2) generated in
                   some way by both the server and the client.

                   Examples:
                       LANMAN-Challenge: 0102030405060708

               LANMAN-Response
                   The 24 byte LANMAN Response value, calculated from the
                   user's password and the supplied LANMAN Challenge.
                   Typically, this is provided over the network by a client
                   wishing to authenticate.

                   Examples:
                       LANMAN-Response:
                       0102030405060708090A0B0C0D0E0F101112131415161718

               NT-Response
                   The >= 24 byte NT Response calculated from the user's
                   password and the supplied LANMAN Challenge. Typically, this
                   is provided over the network by a client wishing to
                   authenticate.

                   Examples:
                       NT-Response:
                       0102030405060708090A0B0C0D0E0F10111213141516171

               Password
                   The user's password. This would be provided by a network
                   client, if the helper is being used in a legacy situation
                   that exposes plaintext passwords in this way.

                   Examples:
                       Password: samba2

                       Password:: c2FtYmEy

               Request-User-Session-Key
                   Upon successful authenticaiton, return the user session key
                   associated with the login.

                   Examples:
                       Request-User-Session-Key: Yes

               Request-LanMan-Session-Key
                   Upon successful authenticaiton, return the LANMAN session
                   key associated with the login.

                   Examples:
                       Request-LanMan-Session-Key: Yes


               Warning
               Implementers should take care to base64 encode any data (such
               as usernames/passwords) that may contain malicous user data,
               such as a newline. They may also need to decode strings from
               the helper, which likewise may have been base64 encoded.

       --username=USERNAME
           Specify username of user to authenticate

       --domain=DOMAIN
           Specify domain of user to authenticate

       --workstation=WORKSTATION
           Specify the workstation the user authenticated from

       --challenge=STRING
           NTLM challenge (in HEXADECIMAL)

       --lm-response=RESPONSE
           LM Response to the challenge (in HEXADECIMAL)

       --nt-response=RESPONSE
           NT or NTLMv2 Response to the challenge (in HEXADECIMAL)

       --password=PASSWORD
           User's plaintext password

           If not specified on the command line, this is prompted for when
           required.

           For the NTLMSSP based server roles, this parameter specifies the
           expected password, allowing testing without winbindd operational.

       --request-lm-key
           Retrieve LM session key

       --request-nt-key
           Request NT key

       --diagnostics
           Perform Diagnostics on the authentication chain. Uses the password
           from --password or prompts for one.

       --require-membership-of={SID|Name}
           Require that a user be a member of specified group (either name or
           SID) for authentication to succeed.

       -d|--debuglevel=level
           level is an integer from 0 to 10. The default value if this
           parameter is not specified is 0.

           The higher this value, the more detail will be logged to the log
           files about the activities of the server. At level 0, only critical
           errors and serious warnings will be logged. Level 1 is a reasonable
           level for day-to-day running - it generates a small amount of
           information about operations carried out.

           Levels above 1 will generate considerable amounts of log data, and
           should only be used when investigating a problem. Levels above 3
           are designed for use only by developers and generate HUGE amounts
           of log data, most of which is extremely cryptic.

           Note that specifying this parameter here will override the log
           level parameter in the smb.conf file.

       -V|--version
           Prints the program version number.

       -s|--configfile <configuration file>
           The file specified contains the configuration details required by
           the server. The information in this file includes server-specific
           information such as what printcap file to use, as well as
           descriptions of all the services that the server is to provide. See
           smb.conf for more information. The default configuration file name
           is determined at compile time.

       -l|--log-basename=logdirectory
           Base directory name for log/debug files. The extension ".progname"
           will be appended (e.g. log.smbclient, log.smbd, etc...). The log
           file is never removed by the client.

       -h|--help
           Print a summary of command line options.

EXAMPLE SETUP
       To setup ntlm_auth for use by squid 2.5, with both basic and NTLMSSP
       authentication, the following should be placed in the squid.conf file.

           auth_param ntlm program ntlm_auth --helper-protocol=squid-2.5-ntlmssp
           auth_param basic program ntlm_auth --helper-protocol=squid-2.5-basic
           auth_param basic children 5
           auth_param basic realm Squid proxy-caching web server
           auth_param basic credentialsttl 2 hours

           Note
           This example assumes that ntlm_auth has been installed into your
           path, and that the group permissions on winbindd_privileged are as
           described above.

       To setup ntlm_auth for use by squid 2.5 with group limitation in
       addition to the above example, the following should be added to the
       squid.conf file.

           auth_param ntlm program ntlm_auth --helper-protocol=squid-2.5-ntlmssp --require-membership-of='WORKGROUP\Domain Users'
           auth_param basic program ntlm_auth --helper-protocol=squid-2.5-basic --require-membership-of='WORKGROUP\Domain Users'

TROUBLESHOOTING
       If you're experiencing problems with authenticating Internet Explorer
       running under MS Windows 9X or Millennium Edition against ntlm_auth's
       NTLMSSP authentication helper (--helper-protocol=squid-2.5-ntlmssp),
       then please read the Microsoft Knowledge Base article #239869 and
       follow instructions described there.

VERSION
       This man page is correct for version 3 of the Samba suite.

AUTHOR
       The original Samba software and related utilities were created by
       Andrew Tridgell. Samba is now developed by the Samba Team as an Open
       Source project similar to the way the Linux kernel is developed.

       The ntlm_auth manpage was written by Jelmer Vernooij and Andrew
       Bartlett.



ATTRIBUTES
       See attributes(5) for descriptions of the following attributes:


       +---------------+-----------------------+
       |ATTRIBUTE TYPE |   ATTRIBUTE VALUE     |
       +---------------+-----------------------+
       |Availability   | service/network/samba |
       +---------------+-----------------------+
       |Stability      | Volatile              |
       +---------------+-----------------------+
NOTES
       This software was built from source available at
       https://java.net/projects/solaris-userland.  The original community
       source was downloaded from
       http://ftp.samba.org/pub/samba/stable/samba-3.6.25.tar.gz

       Further information about this software can be found on the open source
       community website at http://www.samba.org/.



Samba 3.6                         09/18/2013                      NTLM_AUTH(1)